4 layers32 × 46 mm
Falcon core
PHS-SMCS/falcon-core
Lightest ESP32-based blimp controller with the works; 9-DoF, ToF altimetry, motor drivers, and Wi-Fi enabled camera streaming, all on a single 300mAh LiPo. >1hr of battery life.
94 partsAGPL-3.0
2 layers
Netraya
justhar/netraya- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 4
- Nets
- 65
- Pads
- 92
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 1 Aug 2026
- Updated
- 8 Aug 2026
Overview
Netraya is an open-source printed circuit board by justhar, from the justhar/netraya repository on GitHub. It is a 2-layer board with 4 parts on 65 nets.
It is built around the ESP32-S3-WROOM-1-N8 and FPC-05F-24PH20. Its parts include 1 capacitor, 1 resistor and 1 IC. It belongs with the ESP32 boards of this library.
Main components
2
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
FPC-05F-24PH20
SMD,P=0.5mm,卧贴-25℃~+85℃ 0.3mm 0.5mm 24P 2mm 500mA 50V Bottom Contact Hinged Lid Phosphor bronze Surface Mount, Right Angle Tin SMD,P=0.5mm,卧贴 FFC, FPC (Flat Flexible) Connector Assemblies ROHSXUNPUFFC, FPC (Flat Flexible) Connector Assemblies
Parts
4| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10KΩ (1002) ±1% | lcsc_footprints:C25744_R0402 | R1 |
| 1 | 1uF (105) ±10% 50V | lcsc_footprints:C15849_C0603 | C1 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | FPC-05F-24PH20 | lcsc_footprints:C2856805_FPC-SMD_24P-P0_50_FPC-05F-24PH20 | FPC1 |
Questions
What parts does the Netraya use?
4 parts, built around the ESP32-S3-WROOM-1-N8 and FPC-05F-24PH20. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Netraya KiCad files?
From the justhar/netraya repository on GitHub, at the commit this page was made from: the board is _restore_backup_2026-08-04T21-02-37-069/netraya.kicad_pcb and its schematic _restore_backup_2026-08-02T09-53-08-805/netraya.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Netraya design in my own project?
Its repository states no licence, so its author keeps all rights: ask justhar before reusing the design.
Similar boards
- 4 layers45 × 29.2 mm
Pocket 2.66
quintenluyten2/Pocket_2.66_E-reader_PCB
PCB for 2.13" and 2.66" E-ink displays with ESP32-C3, micro-SD card, battery management, and 3 user buttons
88 parts3 - 2 layers18 × 50 mm
- 2 layers61.8 × 42.8 mm
MoonDeck
devisunofficial/MoonDeck
MoonDeck is a Desk gadget which has three purposes, I display to display whatever I want, a magnetic charger to charge my phone (wirelessly), and a mic to listen commands.
44 parts - 2 layers73.5 × 47.5 mm
- 4 layers40 × 24 mm
SCH ESP32-P4 FUNCTION EV BOARD MIPI Camera Sub V1.1 20240529
OHNope/sc035hgs-esp32-p4x-camera-adapter-mod
本仓库在 ESP32-P4XMIPICameraSubV1.1KiCAD（Espressif 官方相机转接板的 KiCad 转换版）基础上，修改为 SC035HGS 相机模组用的转接板。基础工程（导入修复、检查结果）的说明见它的 README。
49 parts - 4 layers104 × 83.2 mm
- 2 layers85 × 115 mm
OSO BOOK B1
joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.
76 parts8.1kCC-BY-SA-4.0