danielstebbings/tiny-camesp32-s3 tiny camera board
Tiny cam is an open-source printed circuit board by danielstebbings, from the danielstebbings/tiny-cam repository on GitHub, published under the MPL-2.0 licence. It is a 2-layer board of 18 × 50 mm with 34 parts on 117 nets.
It is built around the ESP32-S3R8, TPS54331DR-JSM and ME6211C15M5G-N, with the ME6211C28M5G-N, AO3401A and B340 among its other parts. Its parts include 17 capacitors, 5 resistors, 4 ICs, 2 connectors and 1 diode. It belongs with the ESP32 boards of this library.
esp32-s3 tiny camera board
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | PCM_JLCPCB:C_0603 | C6, C12, C13, C14, C15, C17 |
| 5 | 1uF | PCM_JLCPCB:C_0603 | C7, C8, C9, C10, C16 |
| 3 | 10kΩ | PCM_JLCPCB:R_0603 | R2, R3, R5 |
| 1 | 15pF | PCM_JLCPCB:C_0603 | C11 |
| 1 | 15uH 1.15A 190mR | Inductor_SMD:L_APV_ANR4018 | L1 |
| 1 | 22uF | PCM_JLCPCB:C_0603 | C1 |
| 1 | 3.3kΩ | PCM_JLCPCB:R_0603 | R4 |
| 1 | 4.3kΩ | PCM_JLCPCB:R_0603 | R1 |
| 1 | 470pF | PCM_JLCPCB:C_0603 | C5 |
| 1 | 47uF | PCM_JLCPCB:C_0805 | C2 |
| 1 | 6.8nF | PCM_JLCPCB:C_0603 | C4 |
| 1 | 8.2nF | PCM_JLCPCB:C_0603 | C3 |
| 1 | AO3401A | PCM_JLCPCB:Q_SOT-23 | Q1 |
| 1 | B340 | Diode_SMD:D_SMC | D1 |
| 1 | ESP32-S3R8 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP5.6x5.6mm_ThermalVias | U1 |
| 1 | FPC-05F-24PH20 | easyeda2kicad:FPC-SMD_24P-P0.50_FPC-05F-24PH20 | FPC1 |
| 1 | ME6211C15M5 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | ME6211C28M5 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | MP23DB01HPTR | tiny-cam:CHIP_B02MM_STM | MIC1 |
| 1 | Micro_SD_Card_Det_Hirose_DM3AT | Connector_Card:microSD_HC_Hirose_DM3D-SF | J2 |
| 1 | TPS54331DR | PCM_JLCPCB:SOIC-8_L5.0-W4.0-P1.27-LS6.0-BL | U2 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4110 | J1 |
It measures 18 × 50 mm and has 2 copper layers, 1.6 mm thick.
34 parts, built around the ESP32-S3R8, TPS54331DR-JSM, ME6211C15M5G-N and ME6211C28M5G-N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the danielstebbings/tiny-cam repository on GitHub, at the commit this page was made from: the board is tiny-cam/tiny-cam.kicad_pcb and its schematic tiny-cam/mcu.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
OHNope/sc035hgs-esp32-p4x-camera-adapter-mod
本仓库在 ESP32-P4XMIPICameraSubV1.1KiCAD（Espressif 官方相机转接板的 KiCad 转换版）基础上，修改为 SC035HGS 相机模组用的转接板。基础工程（导入修复、检查结果）的说明见它的 README。
PHS-SMCS/falcon-core
Lightest ESP32-based blimp controller with the works; 9-DoF, ToF altimetry, motor drivers, and Wi-Fi enabled camera streaming, all on a single 300mAh LiPo. >1hr of battery life.
kaemori/calcwriter_blueprint
An external board that emulates inputs to the keypad matrix of a Sharp EL-W531S II Scientific Calculator.
ameesme/little-camera
A small black-and-white camera that posts to its own tiny blog, and everything around it.
devjamescollier/Dual-Channel_Embedded_Power_Supply_Board
Battery-powered dual-output DC-DC power supply built around two Texas Instruments TPS54331 buck converters. Provides regulated +5 V and +3.3 V rails for embedded systems, with status LEDs, multiple output connectors…