Skip to the content
2 layers74.9 × 98 mmPanelized2, the printed circuit board in 3D

custom stm32f042 microcontroller board

Size
74.9 × 98 mm
Copper layers
2
Thickness
1.6 mm
Parts
134
Nets
32
Pads
512
Tracks, vias
768, 112
Pours
8
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
29 Oct 2020
Updated
29 Oct 2020

Overview

Panelized2 is an open-source printed circuit board by jumper385, from the jumper385/stm32f042_microcontroller repository on GitHub. It is a 2-layer board of 74.9 × 98 mm with 134 parts on 32 nets, routed with 768 tracks and 112 vias.

It is built around the SN65HVD233D. Its parts include 48 capacitors, 28 connectors, 16 resistors, 12 ICs and 8 diodes. It belongs with the STM32 boards of this library.

Main components

1

Parts

134
QtyValueFootprintReferences
16Conn_01x02_MaleConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2, J2, J2, J2, J4, J4, J4, J4, J5, J5, J5, J5, J7, J7, J7, J7
14VAL**Panelization:mouse-bite-2.54mm-slotmouse-bite-2.54mm-slot, mouse-bite-2.54mm-slot, mouse-bite-2.54mm-slot, mouse-bite-2.54mm-slot, mouse-bite-2.54mm-slot, mouse-bite-2.54mm-slot, mouse-bite-2.54mm-slot, mouse-bite-2.54mm-slot, mouse-bite-2.54mm-slot, mouse-bite-2.54mm-slot, mouse-bite-2.54mm-slot, mouse-bite-2.54mm-slot, mouse-bite-2.54mm-slot, mouse-bite-2.54mm-slot
12100nFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC1, C1, C1, C1, C9, C9, C9, C9, C10, C10, C10, C10
810uFCapacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolderC4, C4, C4, C4, C7, C7, C7, C7
812pFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC2, C2, C2, C2, C3, C3, C3, C3
81uFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC8, C8, C8, C8, C12, C12, C12, C12
84.7uFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC5, C5, C5, C5, C11, C11, C11, C11
847RResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR1, R1, R1, R1, R2, R2, R2, R2
8GREENLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1, D1, D1, D1, D2, D2, D2, D2
410nFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC6, C6, C6, C6
4120RResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR4, R4, R4, R4
4270Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR3, R3, R3, R3
4Conn_01x05_MaleConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ1, J1, J1, J1
4Conn_01x06_MaleConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ6, J6, J6, J6
4Conn_01x08_MaleConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ3, J3, J3, J3
4Crystal_GND24Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSolderingY1, Y1, Y1, Y1
4LOGOmemes:little_creaturesG***, G***, G***, G***
4NCP1117ST33T3GPackage_TO_SOT_SMD:SOT-223U1, U1, U1, U1
4SN65HVD233Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU3, U3, U3, U3
4STM32F042G6UxPackage_DFN_QFN:QFN-28_4x4mm_P0.5mmU2, U2, U2, U2

More from jumper385/stm32f042_microcontroller

2
  • 2 layers94 × 100.6 mmPanelized, the printed circuit board in 3D

    Panelized

    jumper385/stm32f042_microcontroller

    custom stm32f042 microcontroller board

    187 parts1
  • 2 layers27.9 × 47.8 mmCustom microcontroller, the printed circuit board in 3D

    Custom microcontroller

    jumper385/stm32f042_microcontroller

    custom stm32f042 microcontroller board

    30 parts1

Similar boards

  • 4 layers47.5 × 62 mmDraco, the printed circuit board in 3D

    Draco

    xdandys/draco

    Flight controller powered by TauLabs

    164 parts8
  • 2 layers50 × 61 mmENP KIT-232-485-CAN, the printed circuit board in 3D

    ENP KIT-232-485-CAN

    Enapter/ucm-kit-open-hardware

    Enapter UCM Kit – open hardware for connecting your energy devices.

    32 parts4
  • 2 layers170.6 × 121.1 mmEIM, the printed circuit board in 3D

    EIM

    bhorst519/bluecar

    232 parts3
  • 4 layers90.2 × 95.9 mmHyperion, the printed circuit board in 3D

    Hyperion

    AerodyneLabs/Hyperion

    Hardware and firmware for the Hyperion motherboard

    72 parts1
  • 2 layers55.9 × 49.5 mmTyphoonMotherboard rev1 KiCad, the printed circuit board in 3D

    TyphoonMotherboard rev1 KiCad

    hpvdt/typhoon_motherboard

    Folder for each of the boards designed for a given project, even if there is only one board for a given project.

    75 parts1
  • 4 layers40 × 40 mmADC2CAN, the printed circuit board in 3D

    ADC2CAN

    Antokolski/pgracing-adc2can

    46 parts
  • 2 layers102 × 84 mmRelayCard, the printed circuit board in 3D

    RelayCard

    chapppy/Board-for-Relay-Card

    Design of schematic and PCB for Relay Card control over USB and CAN based on STM32

    81 partsGPL-3.0
  • 2 layers95 × 85 mmHIL ADAPTER BOARD, the printed circuit board in 3D

    HIL ADAPTER BOARD

    IL2232-HT2022-HIL/HARDWARE_DEV

    Hardware development for the project

    33 parts

Questions

How big is the Panelized2 PCB?

It measures 74.9 × 98 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Panelized2 use?

134 parts, built around the SN65HVD233D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Panelized2 KiCad files?

From the jumper385/stm32f042_microcontroller repository on GitHub, at the commit this page was made from: the board is panelized2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Panelized2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask jumper385 before reusing the design.