4 layers47.5 × 62 mm
2 layers95 × 85 mm
HIL ADAPTER BOARD
IL2232-HT2022-HIL/HARDWARE_DEVHardware development for the project
- Size
- 95 × 85 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 192
- Pads
- 292
- Tracks, vias
- 338, 68
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 15 Sep 2022
- Updated
- 15 Nov 2022
Overview
HIL ADAPTER BOARD is an open-source printed circuit board by IL2232-HT2022-HIL, from the IL2232-HT2022-HIL/HARDWARE_DEV repository on GitHub. It is a 2-layer board of 95 × 85 mm with 33 parts on 192 nets, routed with 338 tracks and 68 vias.
It is built around the SN65HVD233D. Its parts include 22 resistors, 4 connectors, 2 capacitors, 2 ICs and 2 diodes. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdHARDWARE_DEV
Hardware development for the project
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13 |
| 4 | 0 | Resistor_SMD:R_0603_1608Metric | R17, R18, R19, R20 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R14, R15 |
| 2 | 120 | Resistor_SMD:R_0603_1608Metric | R21, R22 |
| 2 | Conn_02x20_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | CN7, CN10 |
| 2 | Conn_02x36_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x36_P2.54mm_Vertical | CN11, CN12 |
| 2 | D | Diode_SMD:D_SOD-323 | D1, D2 |
| 2 | SN65HVD233 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2 |
| 1 | 3k3 | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | LOGO | Logos:hil_logo_mask | G*** |
Similar boards
- 2 layers50 × 61 mm
ENP KIT-232-485-CAN
Enapter/ucm-kit-open-hardware
Enapter UCM Kit – open hardware for connecting your energy devices.
32 parts4 - 2 layers170.6 × 121.1 mm
- 4 layers90.2 × 95.9 mm
- 2 layers55.9 × 49.5 mm
TyphoonMotherboard rev1 KiCad
hpvdt/typhoon_motherboard
Folder for each of the boards designed for a given project, even if there is only one board for a given project.
75 parts1 - 2 layers94 × 100.6 mm
- 4 layers40 × 40 mm
- 2 layers102 × 84 mm
RelayCard
chapppy/Board-for-Relay-Card
Design of schematic and PCB for Relay Card control over USB and CAN based on STM32
81 partsGPL-3.0
Questions
How big is the HIL ADAPTER BOARD PCB?
It measures 95 × 85 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HIL ADAPTER BOARD use?
33 parts, built around the SN65HVD233D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HIL ADAPTER BOARD KiCad files?
From the IL2232-HT2022-HIL/HARDWARE_DEV repository on GitHub, at the commit this page was made from: the board is ADAPTER_BOARD/HIL_ADAPTER_BOARD_V1/HIL_ADAPTER_BOARD.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the HIL ADAPTER BOARD design in my own project?
Its repository states no licence, so its author keeps all rights: ask IL2232-HT2022-HIL before reusing the design.