
SN65HVD233D
Texas InstrumentsExtended
-40℃~+125℃ 1 1Mbps 200uA 3.3V 6mA CAN Transceiver SOIC-8 CAN Transceivers ROHS
- Part id
- ti/SN65HVD233D
- Category
- CAN Transceivers
- Package
- SOIC-8
- Pins
- 8
- In stock
- 12,851 at JLCPCB (C61643)
- Used on
- 27 open-source boards
Overview
The SN65HVD233D is a CAN Transceiver made by Texas Instruments in a SOIC-8 package with 8 pins. -40℃~+125℃ 1 1Mbps 200uA 3.3V 6mA CAN Transceiver SOIC-8 CAN Transceivers ROHS.
PCBKit's library has its KiCad symbol (Interface_CAN_LIN:SN65HVD233, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 12,851 are in stock at JLCPCB (part C61643). 27 open-source boards in 19 repositories on GitHub use it.
Symbol
Footprint
Pinout
8| Pin | Name | Type |
|---|---|---|
| 1 | D | Input |
| 2 | GND | Power in |
| 3 | VCC | Power in |
| 4 | R | Output |
| 5 | LBK | Input |
| 6 | CANL | Input/output |
| 7 | CANH | Input/output |
| 8 | Rs | Input |
- 4 layers47.5 × 62 mm

- 2 layers50 × 61 mm

ENP KIT-232-485-CAN
Enapter/ucm-kit-open-hardware
Enapter UCM Kit – open hardware for connecting your energy devices.
32 parts4 - 2 layers170.6 × 121.1 mm

- 4 layers90.2 × 95.9 mm

- 2 layers55.9 × 49.5 mm

TyphoonMotherboard rev1 KiCad
hpvdt/typhoon_motherboard
Folder for each of the boards designed for a given project, even if there is only one board for a given project.
75 parts1 - 2 layers94 × 100.6 mm

- 4 layers40 × 40 mm

- 2 layers102 × 84 mm

RelayCard
chapppy/Board-for-Relay-Card
Design of schematic and PCB for Relay Card control over USB and CAN based on STM32
81 partsGPL-3.0
Parts like it
8TJA1051T/3/1J
SOIC-8-150mil-40℃~+150℃ 110mA 4.5V~5.5V 5Mbps CAN FD Transceiver SOIC-8-150mil CAN Transceivers ROHSNXP SemiconductorsCAN TransceiversSN65HVD230D
SOIC-8-40℃~+85℃ 1 17mA 1Mbps 370uA 3V~3.6V CAN Transceiver Low-power mode、Wake-up function、ESD protection、Thermal shutdown protection、Bus fault protection、Hot-swap protection SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversTJA1042T/1J
SOIC-8-40℃~+150℃ 15uA 4.5V~5.5V 5Mbps 70mA CAN FD Transceiver SOIC-8 CAN Transceivers ROHSNXP SemiconductorsCAN TransceiversCA-IF1051S
SOIC-8-55℃~+150℃ 2Mbps 4.5V~5.5V 80mA CAN Transceiver SOIC-8 CAN Transceivers ROHSChipanalogCAN TransceiversTJA1042T/3/1J
SOIC-8-40℃~+150℃ 15uA 4.5V~5.5V 5Mbps 70mA SOIC-8 CAN Transceivers ROHSNXP SemiconductorsCAN TransceiversTJA1044T/1Z
SOIC-8-40℃~+150℃ 15uA 1Mbit/s 4.5V~5.5V 60mA CAN Transceiver SOIC-8 CAN Transceivers ROHSNXP SemiconductorsCAN TransceiversSIT1050T
SO-8-40℃~+125℃ 1 10mA 1Mbps 4.5V~5.5V 70mA CAN Transceiver TXD dominant timeout、Thermal shutdown protection、Short-Circuit Protection、Silent mode SO-8 CAN Transceivers ROHSSITCAN TransceiversSN65HVD232D
SOIC-8-40℃~+85℃ 17mA 1Mbps 3.3V CAN Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN Transceivers
Questions
Is there a KiCad symbol and footprint for the SN65HVD233D?
Yes. The symbol is Interface_CAN_LIN:SN65HVD233 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the SN65HVD233D?
SOIC-8, with 8 pins. Its footprint is drawn on this page.
Where is the SN65HVD233D datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the SN65HVD233D?
JLCPCB lists it as part C61643, with 12,851 in stock; the sellers' links on this page open their listings.
What can replace the SN65HVD233D?
Parts like it in the library: the TJA1051T/3/1J by NXP Semiconductors, the SN65HVD230D by Texas Instruments, the TJA1042T/1J by NXP Semiconductors and the CA-IF1051S by Chipanalog. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the SN65HVD233D?
27 boards in 19 repositories on GitHub; the most starred are listed on this page, with their KiCad files.