2 layers74.9 × 98 mm
2 layers94 × 100.6 mm
Panelized
jumper385/stm32f042_microcontroller1custom stm32f042 microcontroller board
- Size
- 94 × 100.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 187
- Nets
- 32
- Pads
- 712
- Tracks, vias
- 1,398, 144
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Oct 2020
- Updated
- 29 Oct 2020
Overview
Panelized is an open-source printed circuit board by jumper385, from the jumper385/stm32f042_microcontroller repository on GitHub. It is a 2-layer board of 94 × 100.6 mm with 187 parts on 32 nets, routed with 1,398 tracks and 144 vias.
It is built around the SN65HVD233D. Its parts include 72 capacitors, 42 connectors, 24 resistors, 18 ICs and 12 diodes. It belongs with the STM32 boards of this library.
Main components
1Parts
187| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J2, J2, J2, J2, J2, J4, J4, J4, J4, J4, J4, J5, J5, J5, J5 +8 |
| 18 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C1, C1, C1, C1, C1, C9, C9, C9, C9, C10, C10, C10, C10, C10, C10 +2 |
| 12 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C4, C4, C4, C4, C4, C4, C7, C7, C7, C7, C7, C7 |
| 12 | 12pF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C2, C2, C2, C2, C2, C3, C3, C3, C3, C3, C3 |
| 12 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C8, C8, C8, C8, C8, C8, C12, C12, C12, C12, C12, C12 |
| 12 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5, C5, C5, C5, C5, C5, C11, C11, C11, C11, C11, C11 |
| 12 | 47R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R1, R1, R1, R1, R1, R2, R2, R2, R2, R2, R2 |
| 12 | GREEN | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D1, D1, D1, D1, D1, D2, D2, D2, D2, D2, D2 |
| 6 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C6, C6, C6, C6, C6, C6 |
| 6 | 120R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R4, R4, R4, R4, R4 |
| 6 | 270 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R3, R3, R3, R3, R3 |
| 6 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1, J1, J1, J1, J1, J1 |
| 6 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6, J6, J6, J6, J6, J6 |
| 6 | Conn_01x08_Male | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J3, J3, J3, J3, J3, J3 |
| 6 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1, Y1, Y1, Y1, Y1, Y1 |
| 6 | NCP1117ST33T3G | Package_TO_SOT_SMD:SOT-223 | U1, U1, U1, U1, U1, U1 |
| 6 | SN65HVD233 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3, U3, U3, U3, U3, U3 |
| 6 | STM32F042G6Ux | Package_DFN_QFN:QFN-28_4x4mm_P0.5mm | U2, U2, U2, U2, U2, U2 |
| 1 | LOGO | memes:pepe6 | G*** |
| 1 | LOGO | memes:pepe5 | G*** |
| 1 | LOGO | memes:pepe3 | G*** |
| 1 | LOGO | memes:pepe1 | G*** |
| 1 | LOGO | memes:pepe2 | G*** |
| 1 | LOGO | memes:pepe4 | G*** |
The 180 most common of 187 parts.
More from jumper385/stm32f042_microcontroller
2- 2 layers27.9 × 47.8 mm
Custom microcontroller
jumper385/stm32f042_microcontroller
custom stm32f042 microcontroller board
30 parts1
Similar boards
- 4 layers47.5 × 62 mm
- 2 layers50 × 61 mm
ENP KIT-232-485-CAN
Enapter/ucm-kit-open-hardware
Enapter UCM Kit – open hardware for connecting your energy devices.
32 parts4 - 2 layers170.6 × 121.1 mm
- 4 layers90.2 × 95.9 mm
- 2 layers55.9 × 49.5 mm
TyphoonMotherboard rev1 KiCad
hpvdt/typhoon_motherboard
Folder for each of the boards designed for a given project, even if there is only one board for a given project.
75 parts1 - 4 layers40 × 40 mm
- 2 layers102 × 84 mm
RelayCard
chapppy/Board-for-Relay-Card
Design of schematic and PCB for Relay Card control over USB and CAN based on STM32
81 partsGPL-3.0 - 2 layers95 × 85 mm
Questions
How big is the Panelized PCB?
It measures 94 × 100.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Panelized use?
187 parts, built around the SN65HVD233D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Panelized KiCad files?
From the jumper385/stm32f042_microcontroller repository on GitHub, at the commit this page was made from: the board is panelized.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Panelized design in my own project?
Its repository states no licence, so its author keeps all rights: ask jumper385 before reusing the design.