Skip to the content
2 layers100 × 100 mmNU0001 DRS Controller, the printed circuit board in 3D
Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
63
Nets
59
Pads
213
Tracks, vias
263, 205
Pours
69
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
4 Jan 2025
Updated
11 Jan 2026

Overview

NU0001 DRS Controller is an open-source printed circuit board by jukes03, from the jukes03/NU-Racing-Lead-MCHA-2025 repository on GitHub. It is a 2-layer board of 100 × 100 mm with 63 parts on 59 nets, routed with 263 tracks and 205 vias.

It is built around the TJA1051T/3/1, LM2596S-ADJ and SS34, with the CSNL2512FTR100, DSIC01THGET and DT15-4P among its other parts. Its parts include 14 resistors, 8 capacitors, 8 diodes, 6 ICs and 4 connectors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.

Main components

7

Parts

63
QtyValueFootprintReferences
41KResistor_SMD:R_1206_3216MetricR2, R3, R5, R12
4MountingHoleMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H2, H3, H4
30.1uFCapacitor_SMD:C_1206_3216MetricC1, C6, C7
3FiducialFiducial:Fiducial_0.5mm_Mask1mmFID1, FID2, FID3
210KResistor_SMD:R_1206_3216MetricR8, R13
2500Resistor_SMD:R_1206_3216MetricR6, R7
2SMDFuse01550900M:FUSE_01550900M_LTFF1, F2
2SS34Diode_SMD:D_SMAD2, D4
1+5VXL-3215SURC:LED_6UBC_XLGD6
1+5VDRS-Controller:TestPoint_Loop_D1.80mm_Drill1.0mm_BeadedTP6
1+6VDRS-Controller:TestPoint_Loop_D1.80mm_Drill1.0mm_BeadedTP5
1+6VXL-3215SURC:LED_6UBC_XLGD5
1+VBATXL-3215SURC:LED_6UBC_XLGD1
1+VBATDRS-Controller:TestPoint_Loop_D1.80mm_Drill1.0mm_BeadedTP3
1+VBAT_PROTDRS-Controller:TestPoint_Loop_D1.80mm_Drill1.0mm_BeadedTP4
1+VBAT_PROTXL-3215SURC:LED_6UBC_XLGD3
10.33uFCapacitor_SMD:C_1206_3216MetricC4
1100Resistor_SMD:R_1206_3216MetricR11
1100nCapacitor_SMD:C_1206_3216MetricC8
1120uF20SVPF120M:PCAP_SVP_C6_PANC2
1120ΩResistor_SMD:R_1206_3216MetricR1
119.5KResistor_SMD:R_1206_3216MetricR14
11nFCapacitor_SMD:C_1206_3216MetricC3
13.9KResistor_SMD:R_1206_3216MetricR4
133uHIHLP6767DZER330M11:IND_IHLP-6767DZ_VISL1
13V3Diode_SMD:D_SOD-123D8
1470uFEEV-FK1V471Q:CAP_EEFK_H13_PANC5
19KResistor_SMD:R_1206_3216MetricR9
1Branding_Block_TeamsNU-Teams-Footprints:BRANDING_TEAMSU3
1CAN_H1DRS-Controller:TestPoint_Loop_D1.80mm_Drill1.0mm_BeadedTP1
1CAN_L1DRS-Controller:TestPoint_Loop_D1.80mm_Drill1.0mm_BeadedTP2
1COMMISIONING_PWRTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_HorizontalJ4
1CSNL2512FTR100CSNL2512FK2L00:RES_CSNL2512_2_STPR10
1DE9_ReceptacleConnector_Dsub:DSUB-9_Socket_Vertical_P2.77x2.84mm_MountingHolesJ3
1DSIC01THGETButton_Switch_THT:SW_DIP_SPSTx01_Slide_6.7x4.1mm_W7.62mm_P2.54mm_LowProfileSW1
1DT15-4PNU-Teams-Footprints:DT15-4PJ5
1DT15-6PNU-Teams-Footprints:DT15-6PJ1
1ENDSTOPXL-3215SURC:LED_6UBC_XLGD7
1ENDSTOPDRS-Controller:TestPoint_Loop_D1.80mm_Drill1.0mm_BeadedTP7
1G***kibuzzard-68CA1631kibuzzard-68CA1631
1G***kibuzzard-68CA21AEkibuzzard-68CA21AE
1G***kibuzzard-68CA22D8kibuzzard-68CA22D8
1G***kibuzzard-68CA21C7kibuzzard-68CA21C7
1G***kibuzzard-68CA21E3kibuzzard-68CA21E3
1LM2596S-ADJPackage_TO_SOT_SMD:TO-263-5_TabPin3U4
1LM7805_DPAKPackage_TO_SOT_SMD:TO-263-3_TabPin2U5
1TB67H450FNG_ELTB67H450FNG-EL:P-HSOP8-0405-1p27-002_TOSU6
1TJA1051T-3Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1Teensy4.0DRS-Controller:Teensy4.0U1

Similar boards

  • 2 layers26.4 × 42.5 mmX1p-004, the printed circuit board in 3D

    X1p-004

    jwise/x1-expander

    Expander board for Bambu Lab X1 Carbon

    21 parts50
  • 2 layers78.7 × 58.4 mmAGV SENSOR PCB 2, the printed circuit board in 3D

    AGV SENSOR PCB 2

    Ashutoshkarve007/STM32_Learning

    Learining STM32

    53 parts3
  • 2 layers40 × 60 mmScaner v1, the printed circuit board in 3D

    Scaner v1

    Aleksei327/ESP32-C5-OBD2-Scanner

    DIY dual-CAN OBD2 adapter on Seeed XIAO ESP32-C5 with a Flutter Android app. Working prototype, tested on a Citroën C3 II: full read-only ECU scan, PSA fault codes, live data. Single-sided home-etched KiCad board.

    34 parts2
  • 6 layers100.5 × 101.5 mmCustom ESC, the printed circuit board in 3D

    Custom ESC

    0BitsnBytes/McQueen

    an overpowered rc car that poses a danger to my safety :)

    192 parts1GPL-3.0
  • 2 layers43 × 21.3 mmBUCKCONV, the printed circuit board in 3D

    BUCKCONV

    Harshavar8jdm/LM2596S-Buck-Converter

    Custom LM2596S Buck Converter

    15 parts1GPL-3.0
  • 2 layers39.1 × 68.9 mmBaseChipOnly, the printed circuit board in 3D

    BaseChipOnly

    ZonatedCord/Yggdrasill

    Smart LED plant pot — ESP32 PCB, WS2812B/SK6812 LEDs, WLED firmware, modular 3D-printed vase, and a native iOS app with Apple's Liquid Glass design.

    34 parts1
  • 2 layers60 × 30 mmLM259, the printed circuit board in 3D

    LM259

    IKGB105/LM2596-Adjustable-Buck-Converter

    Adjustable LM2596 buck converter — KiCad PCB + COMSOL thermal validation, documented as an honest engineering logbook

    13 partsMIT
  • 2 layers100 × 100 mmHour meter board microfit can handroute, the printed circuit board in 3D

    Hour meter board microfit can handroute

    ilomon10/embedded-totalizer-hour-meter

    ESP32 engine hour meter & totalizer: firmware, SensorFrame protocol, Node host tools, KiCad PCB and a Deno device simulator

    152 parts

Questions

How big is the NU0001 DRS Controller PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the NU0001 DRS Controller use?

63 parts, built around the TJA1051T/3/1, LM2596S-ADJ, SS34 and CSNL2512FTR100. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the NU0001 DRS Controller KiCad files?

From the jukes03/NU-Racing-Lead-MCHA-2025 repository on GitHub, at the commit this page was made from: the board is ENGG2200 2025/NU0001_DRS-Controller/NU0001_DRS-Controller/PCB/NU0001_DRS-Controller_DRAFT/NU0001_DRS-Controller.kicad_pcb and its schematic ELECTRICAL SYSTEM OVERVIEW/NU25 Electrical System Overview/NU25 Electrical System Overview.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the NU0001 DRS Controller design in my own project?

Its repository states no licence, so its author keeps all rights: ask jukes03 before reusing the design.