2 layers19 × 106 mm
2 layers
PetRockMain1
jsenzel1/modular1- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 103
- Nets
- 96
- Pads
- 322
- Tracks, vias
- 51, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 7 Nov 2022
- Updated
- 7 Nov 2022
Overview
PetRockMain1 is an open-source printed circuit board by jsenzel1, from the jsenzel1/modular1 repository on GitHub. It is a 2-layer board with 103 parts on 96 nets, routed with 51 tracks and 0 vias.
It is built around the RP2040, W25Q128JVSIQ and PCF8523T, with the SM4001, SMD0805-010-24V and ABLS-12.000MHZ-B4-T among its other parts. Its parts include 40 resistors, 24 diodes, 20 capacitors, 7 connectors and 5 ICs. It belongs with the RP2040 boards of this library.
Main components
6
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
PCF8523T
SOIC8Real-Time Clock (RTC) and calendarNXP SemiconductorsUncategorised
SM4001
DO-213AB-50℃~+175℃ 1 Independent 1.1V@1A 1A 44A 50V 5uA@50V DO-213AB Diodes - General Purpose ROHSDIOTECDiodes - General Purpose
SMD0805-010-24V
0805-40℃~+85℃ 1.5s 100A 100mA 1Ω 24V 300mA 500mW 6Ω 0805 Resettable Fuses ROHS台湾陆海Resettable Fuses
ABLS-12.000MHZ-B4-T
HC-49S-SMD-20℃~+70℃ 12MHz 18pF 50Ω ±30ppm ±50ppm HC-49S-SMD Crystals ROHSAbraconCrystals
README
README.mdmodular1
Parts
103| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 100r | Capacitor_SMD:C_0402_1005Metric | R23, R24, R25, R26, R27, R28, R29, R30, R31, R32, R33, R34, R35, R36, R37, R38 +1 |
| 15 | LED | Capacitor_SMD:C_0603_1608Metric | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15 |
| 10 | 100n | Capacitor_SMD:C_0402_1005Metric | C5, C6, C7, C9, C11, C12, C13, C14, C15, C16 |
| 6 | 10k | Capacitor_SMD:C_0402_1005Metric | R6, R7, R14, R15, R19, R20 |
| 5 | 1k | Capacitor_SMD:C_0402_1005Metric | R1, R5, R8, R13, R18 |
| 4 | 100K | Capacitor_SMD:C_0402_1005Metric | R10, R12, R17, R22 |
| 4 | AudioJack2 | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J3, J4, J5, J6 |
| 4 | BAT43W-V | Diode_SMD:D_SOD-123 | D17, D18, D19, D20 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric | C17, C19, C20 |
| 2 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C21, C22 |
| 2 | 1K | Capacitor_SMD:C_0402_1005Metric | R16, R21 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C8, C10 |
| 2 | 27 | Capacitor_SMD:C_0402_1005Metric | R3, R4 |
| 2 | 27p | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 2 | 4148 | Diode_SMD:D_SOD-123 | D21, D22 |
| 2 | 470 | Capacitor_SMD:C_0402_1005Metric | R9, R11 |
| 2 | MMBT3904 (BEC) | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | SM4001 | Diode_SMD:D_MELF | D24, D25 |
| 2 | SMD0805-010-24V | Fuse:Fuse_0805_2012Metric | F1, F2 |
| 1 | 10uf | Capacitor_SMD:C_0805_2012Metric | C18 |
| 1 | 330r | Capacitor_SMD:C_0402_1005Metric | R40 |
| 1 | ABLS-12.000MHZ-B4-T | RP2040_minimal:Crystal_SMD_HC49-US | Y1 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_500 | BT1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Crystal | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | DNF | Capacitor_SMD:C_0402_1005Metric | R2 |
| 1 | Eurorack Power | Connector_PinHeader_1.00mm:PinHeader_2x05_P1.00mm_Vertical | J7 |
| 1 | L78L08_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U5 |
| 1 | LED_RGB | LED_SMD:LED_RGB_5050-6 | D16 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | PCF8523T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | RP2040 | RP2040_minimal:RP2040-QFN-56 | U3 |
| 1 | USB_B_Micro | RP2040_minimal:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal_modified | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U2 |
Questions
What parts does the PetRockMain1 use?
103 parts, built around the RP2040, W25Q128JVSIQ, PCF8523T and SM4001. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PetRockMain1 KiCad files?
From the jsenzel1/modular1 repository on GitHub, at the commit this page was made from: the board is petRockMain1/petRockMain1.kicad_pcb and its schematic petRockMain1/input_protection.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PetRockMain1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask jsenzel1 before reusing the design.
Similar boards
- 2 layers49.5 × 106 mm
Supra board
jsenzel1/supra
is multimode Eurorack module with 4 different experiments in long term time. you can run up to 2 modes at once. use the 4 way joystick and buttons to interact with the modes on the oled
119 parts4 - 4 layers104.2 × 59.7 mm
- 4 layers82.6 × 82.5 mm
- 4 layers102.9 × 96.7 mm
PicoGUS chipdown
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
99 parts805 - 2 layers99.1 × 72.9 mm
- 2 layers475 × 139.9 mm
Skogaslider main pcb
skogaby/skogaslider
Firmware, CAD, and PCB files for the skogaslider, an RP2040-based controller to simulate Chunithm's gameplay experience
175 parts18MIT - 2 layers30.1 × 65.1 mm
RPi 0 RP2040
Hugoyhu/Pico2040ZeroW
Raspberry Pi Form Factor, RP2040, Wireless support with ESP-01
46 parts7Apache-2.0