RJ Schematic v1.0

# Update package lists
sudo apt update

# Upgrade installed packages
sudo apt upgrade

# Remove unused packages
sudo apt autoremove

# Clean up package cache
sudo apt clean

# Install Git
sudo apt-get install git -y

# Verify Git installation
git --version

# Install ALSA utilities and libraries
sudo apt-get install alsa-utils libasound2-dev -y

# Verify ALSA installation
aplay --version

# Install CMake
sudo apt-get install cmake -y

# Verify CMake installation
cmake --version

# Install Qt6
sudo apt-get install qt6-base-dev -y
sudo apt-get install qt6-base-dev-tools -y
sudo apt-get install qt6-tools-dev -y

# Install XKB
sudo apt-get install libxkbcommon-dev -y

Clone the repository
```bash
# Clone the repository from GitHub
git clone https://github.com/Jscott44/RTEP5-the-raspberry-jam.git

# Change directory to the cloned repository
cd RTEP5-the-raspberry-jam

# List files in the repository
ls

# Change to device tree directory
cd deviceTree

# Compile on Raspberry Pi  
dtc -@ -H epapr -O dtb -o genericstereoaudiocodec.dtbo -Wno-unit_address_vs_reg genericstereoaudiocodec.dts

# Copy i2smaster.dtbo to /boot/overlays  
sudo cp genericstereoaudiocodec.dtbo /boot/overlays

# Return to repository directory
cd ..

#dtparam=i2c_arm=on
dtparam=i2s=on
#dtparam=spi=on
dtoverlay=genericstereoaudiocodec

# Compile on Raspberry Pi
# Change to device tree directory
cd deviceTree

dtc -@ -H epapr -O dtb -o i2smaster.dtbo -Wno-unit_address_vs_reg i2smaster.dts

# Copy i2smaster.dtbo to /boot/overlays  
sudo cp i2smaster.dtbo /boot/overlays

# Return to repository directory
cd ..

# Uncomment some or all of these to enable the optional hardware interface
#dtparam=i2c_arm=on
dtparam=i2s=on
#dtparam=spi=on
dtoverlay=i2smaster

# Create a build directory (optional)
mkdir -p build
cd build

# Configure the build using CMake
cmake ..

# Build the project
make

# Run the Application
./RJ