2 layers132.5 × 84.8 mm
2 layers100 × 80 mm
Rti
cceh/rti15Reflectance Transformation Imaging
- Size
- 100 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 73
- Pads
- 258
- Tracks, vias
- 569, 2
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 15 May 2017
- Updated
- 1 Aug 2023
Overview
Rti is an open-source printed circuit board by cceh, from the cceh/rti repository on GitHub. It is a 2-layer board of 100 × 80 mm with 58 parts on 73 nets, routed with 569 tracks and 2 vias.
It is built around the ATMEGA328-PU, TPIC6B595N and L7805CV, with the LM317T, BD140 and NRJ6HF among its other parts. Its parts include 16 transistors, 11 connectors, 8 capacitors, 6 resistors and 6 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
6
ATMEGA328-PU
PDIP-28-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
TPIC6B595N
PDIP-20-40℃~+125℃ 1 4.5V~5.5V 8 Asynchronous clear function、Output enable Open-drain Serial-to-Serial or Parallel TPIC PDIP-20 Shift Registers ROHSTexas InstrumentsShift Registers
L7805CV
TO-2200℃~+125℃@(Tj) 1 1.5A 2V@(1A) 35V 5V 68dB@(120Hz) 8mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLM317T
TO-2200.003%Vout 0℃~+125℃@(Tj) 1 1.2V~37V 1.5A 40V 66dB@(120Hz) Adjustable Over Current Protection、Over Temperature Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BD140
TO-126-65℃~+150℃ 1 PNP 1.25W 1.5A 100nA 500mV 5V 63 80V PNP TO-126 Bipolar (BJT) ROHSSTMicroelectronicsBipolar (BJT)
NRJ6HF
Through hole- New Arrivals ROHSNeutrikUncategorised
README
README.rstRTI
The RTI project aims to build an RTI dome.
Project Documentation <https://cceh.github.io/rti/index.html>_
Dependencies
Debian
.. code-block:: console
sudo apt install build-essential liblapacke-dev
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | BD140 | TO_SOT_Packages_THT:TO-126_Vertical | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16 |
| 5 | 100n | Capacitors_THT:C_Disc_D7.5mm_W2.5mm_P5.00mm | C1, C2, C4, C5, C6 |
| 4 | JST PH 3 | Connectors_JST:JST_PH_B3B-PH-K_03x2.00mm_Straight | J6, J7, J8, J9 |
| 3 | MountingHole_3.2mm_M3_DIN965 | Mounting_Holes:MountingHole_3.2mm_M3 | M3, M3_2, M3_3 |
| 2 | 180 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R4, R5 |
| 2 | 22p | Capacitors_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C7, C8 |
| 2 | 330 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R2, R3 |
| 2 | 3K3 | Resistors_THT:R_Array_SIP8 | RN1, RN2 |
| 2 | MEBP 8-8G | Connectors_Anonymous:MEBP_8-8G | J4, J5 |
| 2 | NRJ6HF | Connectors_Neutrik:NRJ6HF | J2, J3 |
| 2 | Switch | Buttons_Switches_THT:SW_PUSH_6mm_h7.3mm | SW1, SW2 |
| 2 | TPIC6B595N | Housings_DIP:DIP-20_W7.62mm | U2, U3 |
| 1 | 16MHz | Crystals:Crystal_HC49-U_Vertical | Y1 |
| 1 | 1K | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1 |
| 1 | 4µ7 | Capacitors_THT:CP_Radial_D5.0mm_P2.00mm | C3 |
| 1 | 6R2 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R6 |
| 1 | ATMEGA328-PU | Housings_DIP:DIP-28_W7.62mm | U1 |
| 1 | Green | LEDs:LED_D5.0mm | D2 |
| 1 | Header 2x3 | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | J10 |
| 1 | JST PH 4 | Connectors_JST:JST_PH_B4B-PH-K_04x2.00mm_Straight | J11 |
| 1 | L7805CV | TO_SOT_Packages_THT:TO-220_Vertical | U6 |
| 1 | LM317T | TO_SOT_Packages_THT:TO-220_Vertical | U5 |
| 1 | LOGO | Logos:CCEH | G*** |
| 1 | PC827 | Housings_DIP:DIP-8_W7.62mm | U4 |
| 1 | Phoenix MKDS | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-3pol | J1 |
| 1 | Red | LEDs:LED_D5.0mm | D1 |
Questions
How big is the Rti PCB?
It measures 100 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rti use?
58 parts, built around the ATMEGA328-PU, TPIC6B595N, L7805CV and LM317T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rti KiCad files?
From the cceh/rti repository on GitHub, at the commit this page was made from: the board is kicad/rti.kicad_pcb and its schematic kicad/rti-case.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rti design in my own project?
Its repository states no licence, so its author keeps all rights: ask cceh before reusing the design.
Similar boards
- 2 layers148.3 × 108.4 mm
RJ Schematic v1.0
Jscott44/RTEP5-the-raspberry-jam
Realtime digital guitar effects pedal designed for Raspberry PI, written in C++
121 parts13MIT - 2 layers100 × 100 mm
- 2 layers108 × 80 mm
Ghost fader
chris-albert/ghost-fader
MIDI-controlled volume and pan for balanced stereo synths (Teensy 4.0 + PGA2310)
82 parts - 4 layers138 × 114 mm
- 2 layers88.9 × 25.4 mm
Channel Two Jacks
bassistTech/ChannelTwoPreamp
Design of compact bass preamp for adding second input to an amp.
5 parts - 2 layers111.1 × 44.5 mm
1KVA Power Supply
Ogbonna-Joseph/1KVA-SINE-WAVE-POWER-INVERTER
This is a design of a sine wave power inverter, which can be used in your homes and offices.
33 parts1 - 2 layers104.1 × 76.2 mm
