

Control pcb
NSSL EFM Redesign
- Size
- 82.6 × 76.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 86
- Nets
- 56
- Pads
- 294
- Tracks, vias
- 551, 115
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Dec 2020
- Updated
- 28 Mar 2024
Overview
Control pcb is an open-source printed circuit board by jrleeman, from the jrleeman/NSSL_EFM repository on GitHub. It is a 4-layer board of 82.6 × 76.2 mm with 86 parts on 56 nets, routed with 551 tracks and 115 vias.
It is built around the STM32F103CBT6, MAX-M8C-0 and MAX3232ID, with the SN74LVC1G18DBV, TC4S584F,LF and BSS138 among its other parts. Its parts include 30 resistors, 26 capacitors, 8 ICs, 6 connectors and 1 transistor. It belongs with the STM32 boards of this library.
Main components
7STM32F103CBT6
LQFP-48(7x7)-40℃~+85℃ 128KB 12bit 20KB 2V~3.6V 32 Bit 37 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)MAX-M8C-0
SMD-18P-167dBm -40℃~+85℃ 1.65V~3.6V GPS、BeiDou、Galileo、GLONASS UART、I2C SMD-18P GNSS Modules ROHSu-bloxGNSS ModulesMAX3232ID
SOIC-16-40℃~+85℃ 2 2 250Kbps 300uA 3V~5.5V Short-Circuit Protection Transceiver Yes ±15kV SOIC-16 RS232 ICs ROHSTexas InstrumentsRS232 ICsSN74LVC1G18DBV
SOT-23-6-40℃~+85℃ 1.65V~5.5V 1/2 10uA 32mA 32mA 4.2ns@3.3V,50pF 74LVC Decoder Output enable high-impedance、Power-off protection、Tri-state output、Level shifting Single Supply SOT-23-6 Signal Switches, Multiplexers, Decoders ROHSTexas InstrumentsSignal Switches, Multiplexers, DecodersTC4S584F,LF
SOT-25-5-40℃~+85℃ 1 1 1.1V~3.3V 120ns@15V,50pF 3.35V~10.6V 3.4mA 3.4mA 3V~18V 4uA Schmitt trigger TC4S Series 噪声抑制功能 SOT-25-5 Inverters ROHSToshibaInvertersBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsCR1220-2
--40~80℃ Battery base CR1220 Phosphor bronze - Battery holder base ROHSQ&JButton And Strip Battery Connector
README
README.mdNSSL_EFM
NSSL EFM Redesign
Parts
86| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 0.1u | Capacitors_SMD:C_0603_HandSoldering | C4, C5, C6, C7, C8, C11, C12, C13, C18, C21, C22, C23, C24, C25, C26 |
| 9 | 10k | Resistors_SMD:R_0603_HandSoldering | R4, R9, R22, R23, R24, R25, R26, R27, R28 |
| 8 | 100k | Resistors_SMD:R_0603_HandSoldering | R1, R2, R11, R12, R13, R15, R16, R17 |
| 5 | NP | Resistors_SMD:R_0603_HandSoldering | R5, R7, R14, R18, R20 |
| 4 | 1u | Capacitors_SMD:C_0603_HandSoldering | C1, C10, C17, C20 |
| 4 | Fiducial | Fiducials:Fiducial_0.75mm_Dia_1.5mm_Outer | FID1, FID2, FID3, FID4 |
| 3 | 0R0 | Resistors_SMD:R_0603_HandSoldering | R6, R8, R19 |
| 3 | 10u | Capacitors_SMD:C_0603_HandSoldering | C9, C16, C19 |
| 3 | MountingHole | Mounting_Holes:MountingHole_3.2mm_M3_ISO7380 | H1, H2, H3 |
| 2 | 20pF | Capacitors_SMD:C_0603_HandSoldering | C2, C3 |
| 2 | Antenna_Shield | lib_fp:SMA | AE1, AE2 |
| 1 | 10 | Resistors_SMD:R_1218_HandSoldering | R21 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R29 |
| 1 | 10nF | Capacitors_SMD:C_0603_HandSoldering | C15 |
| 1 | 1M | Resistors_SMD:R_0603_HandSoldering | R10 |
| 1 | 27k | Resistors_SMD:R_0603_HandSoldering | R3 |
| 1 | 27nH | Resistors_SMD:R_0603_HandSoldering | L1 |
| 1 | 47pF | Capacitors_SMD:C_0603_HandSoldering | C14 |
| 1 | 8MHz | Crystals:Crystal_SMD_HC49-SD_HandSoldering | Y1 |
| 1 | BSS138 | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | Battery | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J6 |
| 1 | CR1220 | lib_fp:S8411-45R | BT1 |
| 1 | Conn_01x02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J1 |
| 1 | External Switch | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J7 |
| 1 | Freq Select | lib_fp:KAE03TGGR | SW1 |
| 1 | IF-D96F | lib_fp:IF-D96F | U4 |
| 1 | ISP | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J2 |
| 1 | LT1521-3.3 | TO_SOT_Packages_SMD:SOT-223-3_TabPin2 | U7 |
| 1 | MAX-M8C | lib_fp:XCVR_MAX-M8C-0-10 | U6 |
| 1 | MAX3232 | Housings_SSOP:TSSOP-16_4.4x5mm_Pitch0.65mm | U8 |
| 1 | Micro_SD_Card_Det | lib_fp:HRS_DM3CS-SF | J5 |
| 1 | MountingHole | Mounting_Holes:MountingHole_3.2mm_M3_ISO7380_Pad | H4 |
| 1 | NP | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R30 |
| 1 | Polyfuse | lib_fp:RGEF250 | F1 |
| 1 | SN74LVC1G18 | lib_fp:SN74LVC1G18DCKR | U2 |
| 1 | STM32F103CBT6 | Housings_QFP:LQFP-48_7x7mm_Pitch0.5mm | U1 |
| 1 | Spare | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J3 |
| 1 | TC4S584F | lib_fp:SOT753 | U5 |
| 1 | TX2M-400-5-NSSL | lib_fp:TX2M | U3 |
More from jrleeman/NSSL_EFM
6- 4 layers75 × 84.8 mm

- 4 layers58.4 × 45.7 mm

- 4 layers44.4 × 31.8 mm

- 4 layers24.1 × 60.3 mm

- 2 layers26.7 × 45.7 mm

- 2 layers91.4 × 43.2 mm

Similar boards
- 2 layers94 × 85 mm

- 2 layers45.1 × 20.1 mm

Circuit board design
ImperialSpaceSociety/picotracker-Lora
This is the code base and hardware design files for the Lora pico tracker to be flown around the world
55 parts14 - 4 layers30.5 × 82.6 mm

Circuit board design
ImperialSpaceSociety/Project-Mach-1
This is the code and hardware designs for the high powered rocketry project at the Imperial College Space Society
89 parts12 - 2 layers80 × 50 mm

- 4 layers77.2 × 68.1 mm

TrackingTurrentBoard
qathas/ECE395_Project
See report for directory layout and other information.
77 parts - 4 layers41.5 × 45 mm

- 2 layers25.4 × 50.8 mm

Stm32....c breakout
electroniceel/stm32....c-breakout
A breakout module for STM32 microcontrollers in LQFP48 and UFQFPN48 footprint.
59 parts20CC-BY-4.0 - 2 layers190 × 72 mm

Questions
How big is the Control pcb PCB?
It measures 82.6 × 76.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Control pcb use?
86 parts, built around the STM32F103CBT6, MAX-M8C-0, MAX3232ID and SN74LVC1G18DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Control pcb KiCad files?
From the jrleeman/NSSL_EFM repository on GitHub, at the commit this page was made from: the board is Hardware/Control_PCB/KiCAD_Project/control_pcb/control_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Control pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask jrleeman before reusing the design.