Skip to the content
2 layers101.5 × 53.3 mmStair Shield, the printed circuit board in 3D

There are actually one control per stairs with 15 Leds per stairs.

Size
101.5 × 53.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
111
Pads
310
Tracks, vias
362, 106
Routed
Yes
KiCad
KiCad 4
Created
8 Jun 2016
Updated
8 Jun 2016

Overview

Stair Shield is an open-source printed circuit board by jpservices01, from the jpservices01/Stair-Shield repository on GitHub. It is a 2-layer board of 101.5 × 53.3 mm with 22 parts on 111 nets, routed with 362 tracks and 106 vias.

It is built around the HC-05 and BH1750FVI-TR. Its parts include 4 resistors, 2 connectors and 1 capacitor. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

Stair-Shield

Project to control the LEDs in a staircase using a Arduino Mega 2560 and the shield uploaded here The idea is to use a shift register to control the Leds independently so that there is not too much power drawn to the Mega 2560 controller. The shift register output intensity is controlled by one resistor and a PWM output.

There are actually one control per stairs with 15 Leds per stairs.

Used Kicad version 4.0.1 Used PCBNew 4.0.1

On PCB version 1.0 Had initially vias set to 0.6 mm with a drill of 0.4mm. PCB Tools said that rest material should be at least 0.15mm and therefore increased vias to 0.7mm with the same drill.

PCB Version 1.1 Corrected the above and remove vias from texts. Also changed the design rules to have at least vias of 0.7mm

Parts

22
QtyValueFootprintReferences
3RELAY_SIP_1A05Socket_Strips:Socket_Strip_Straight_1x07_5.08RLY1, RLY2, RLY3
2CONN_02X10Pin_Headers:Pin_Header_Straight_2x10Flat1_Midstairs_Downstairs1, Flat2_Upstairs_Lowstairs1
11KResistor_Horizontal_RM10mmR3
1270Resistor_Horizontal_RM10mmR1
12KResistor_Horizontal_RM10mmR4
1ARDUINO_MEGA_SHIELDSockets:ARDUINO_MEGA_SHIELDLED_Master_2nd_Floor1
1BH1750FVISocket_Strips:BH1750FVIM3
1CONN_01X08Socket_Strips:Socket_Strip_Angled_1x08P1
1CP1C_Axial_D6_L11_P18C1
1DM13AHousings_DIP:DIP-24_W7.62mmJ1
1HC-05Socket_Strips:HC05M2
1JUMPERSocket_Strips:Socket_Strip_Straight_2x01JP1
1PIR_Motion_SensorSocket_Strips:HC-SR505PIR1
1RResistors_ThroughHole:Resistor_Horizontal_RM10mmR2
1RTC3231Socket_Strips:RTC3231M1

The 18 most common of 22 parts.

Similar boards

  • 2 layers160 × 32 mmMatrixClock, the printed circuit board in 3D

    MatrixClock

    middelink/MatrixClock

    MatrixClock - source code, schematics and pcb layout

    70 parts2MIT
  • 2 layers69.4 × 89.9 mmPanel, the printed circuit board in 3D

    Panel

    themkoi/esp32-alarm-clock

    94 parts2
  • 4 layers230 × 84.9 mmDrunkDashboard v2, the printed circuit board in 3D

    DrunkDashboard v2

    drunkbatya/DrunkDashboard

    STM32 powered pixel automotive dashboard

    223 parts1GPL-3.0
  • 4 layers70 × 92 mmPanelized watch, the printed circuit board in 3D

    Panelized watch

    HolTyc/STM32_watch_NFC

    Watch using STM32 with LED 7-segment display and RGB display

    314 parts1
  • 2 layers27.7 × 44 mmMySXSensors, the printed circuit board in 3D

    MySXSensors

    mczerski/MySXSensors

    MySX board for some sensor modules

    14 parts1
  • 2 layers58.9 × 36.8 mmSensorNodeProject, the printed circuit board in 3D

    SensorNodeProject

    rishabmadhusudhan07/sensor-node

    ESP32 weather node (ESP-IDF/FreeRTOS) targeting 6-month battery life and <50uA quiescent current draw, adaptive sampling, and data integrity.

    47 parts1MIT
  • 2 layers44.3 × 46.3 mmCatear pcb, the printed circuit board in 3D

    Catear pcb

    TobleMiner/catear-pcb

    This repo contains the PCB for the Nekomimi project of @BenBE . It will be used to illuminate 3D printed catears.

    121 parts1

Questions

How big is the Stair Shield PCB?

It measures 101.5 × 53.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Stair Shield use?

22 parts, built around the HC-05 and BH1750FVI-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Stair Shield KiCad files?

From the jpservices01/Stair-Shield repository on GitHub, at the commit this page was made from: the board is KiCad/Kicad.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Stair Shield design in my own project?

Its repository states no licence, so its author keeps all rights: ask jpservices01 before reusing the design.