

Picohttpsensor PCB
- Size
- 91.4 × 50.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 59
- Nets
- 60
- Pads
- 198
- Tracks, vias
- 554, 58
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 19 Sep 2023
- Updated
- 10 Nov 2023
Overview
Picohttpsensor PCB is an open-source printed circuit board by AntonSangho, from the AntonSangho/Picohttpsensor_PCB repository on GitHub. It is a 2-layer board of 91.4 × 50.8 mm with 59 parts on 60 nets, routed with 554 tracks and 58 vias.
It is built around the AHT20, BH1750FVI-TR and TF-115, with the AP2138N-3.3TRG1, PCF85063ATL/1 and DMG2301L-7(ES) among its other parts. Its parts include 18 resistors, 5 capacitors, 5 ICs, 5 connectors and 4 diodes. It belongs with the RP2040 boards of this library.
Main components
11AHT20
SMD-40℃~+120℃ 0%RH~100%RH 2.2V~5.5V 20bit 570uA I2C ±0.3℃ ±2%RH SMD Temperature and Humidity Sensor ROHSAosong ElecTemperature And Humidity SensorBH1750FVI-TR
WSOF-6-40℃~+85℃ 2.4V~3.6V 65.535klx I2C Light Intensity WSOF-6 Ambient Light Sensors ROHSROHM SemiconductorAmbient Light SensorsTF-115
SMD1.8mm Connector and Ejector MicroSD Card (TF Card) Push-Push SMD SD Card / Memory Card Connector ROHSXUNPUSD Card / Memory Card ConnectorAP2138N-3.3TRG1
SOT-23-3-40℃~+85℃@(Ta) 1 160mV@(100mA) 1uA 250mA 3.3V 6V Fixed Positive SOT-23-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsPCF85063ATL/1
DFN-10-EP(2.6x2.6)-40℃~+85℃ 0.22uA 220nA 900mV~5.5V External I2C InsideSRAM/NVRAM、Programmable clock output、Alarm function、Periodic interrupt output、Countdown timer Yes DFN-10-EP(2.6x2.6) Real Time Clocks ROHSNXP SemiconductorsReal Time ClocksDMG2301L-7(ES)
SOT-23SOT-23 MOSFETs ROHSElecSuperMOSFETsTS-1101-C-W
SMD,6x3.6mm-30℃~+85℃ 12V 2.5mm 2.6N 3.6mm 50,000 cycles 50mA 6mm No Rectangular Button SPST Surface Mount,Vertical Without Bracket SMD,6x3.6mm Tactile Switches ROHSXKB ConnectionTactile Switches1PS88SB48
SOT-36310uA@40V 120mA 1V@40mA 2 Pair Common Cathode 200mA 40V SOT-363 Schottky Diodes ROHSNexperiaSchottky DiodesQ13FC1350000200
SMD3215-2P-40℃~+85℃ Crystal Oscillator ±20ppm SMD3215-2P Crystals ROHSSeiko EpsonCrystalsSKHUAKE010
SMD-4P,6.3x6.2mm-40℃~+85℃ 12V 1N 2.5mm 300,000 Cycles 50mA 6.2mm 6.3mm J-Lead Round Button SPST-NO Surface Mount,Vertical SMD-4P,6.3x6.2mm Tactile Switches ROHSALPSALPINETactile SwitchesSM04B-SRSS-TB
Header SR 1.0 SMT side entry, 1mm pitchJSTUncategorised
README
README.md피코보드
진행상황
- 회로 설계
- 레이아웃 설계
- PCB 제작
- PCB 주문

Parts
59| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP9, TP10, TP11, TP12 |
| 6 | 10K | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R6, R13, R20 |
| 4 | 1K | Resistor_SMD:R_0603_1608Metric | R7, R8, R11, R17 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C4, C6 |
| 4 | Jumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP2, JP3, JP4, JP8 |
| 3 | 120K | Resistor_SMD:R_0603_1608Metric | R1, R2, R16 |
| 3 | DMG2301L-7 | DMG2301L-7:SOT96P240X110-3N | Q1, Q2, Q3 |
| 2 | 47K | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 2 | RedLED | LED_SMD:LED_0603_1608Metric | D2, D4 |
| 2 | TS-1101-C-W | TS-1101-C-W:TS1101CW | S1, S2 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 1PS88SB48 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | D3 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 4K7 | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 620K | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | AHT20 | AHT20:AHT20 | U1 |
| 1 | AP2138N-3.3TRG1 | AP2138N-3.3TRG1:SOT95P282X145-3N | IC3 |
| 1 | BH1750FVI-TR | BH1750:WSOF6 | IC2 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J6 |
| 1 | DMN3731U-7 | DMN3731U-7:SOT96P240X110-3N | Q5 |
| 1 | PCF85063ATL | Package_DFN_QFN:DFN-10-1EP_2.6x2.6mm_P0.5mm_EP1.3x2.2mm | U2 |
| 1 | Q13FC1350000200 | Q13FC1350000200:Q13FC1350000200 | Y1 |
| 1 | RASPBERRY_PI_PICO_W | PICO_W:RASPBERRYPIPICOW | IC1 |
| 1 | S2B-PH-SM4-TB_LF__SN_ | S2B-PH-SM4-TB(LF)(SN):S2BPHSM4TBLFSN | J1 |
| 1 | SKHUAKE010 | SKHUAKE010:SKHUAKE010 | S4 |
| 1 | SM04B-SRSS-TB | SM04B-SRSS-TB:SM04BSRSSTB | J4 |
| 1 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_Altech_AK300-3_P5.00mm | J5 |
| 1 | TF-115 | TF-115:TF115 | J3 |
| 1 | WhiteLED | LED_SMD:LED_0603_1608Metric | D1 |
More from AntonSangho/Picohttpsensor_PCB
3- 2 layers91.4 × 50.8 mm

- 2 layers91.4 × 50.8 mm

- 2 layers

Similar boards
- 2 layers80 × 79.1 mm

- 4 layers71.5 × 71.5 mm

Elixir
golioth/elixir-hw
An open source hardware device that has cellular, wifi, bluetooth, GPS, and more!
249 parts36CERN-OHL-P-2.0 - 4 layers142 × 90 mm

- 2 layers56 × 70 mm

Pico sensor pcb
bablokb/pcb-datalogger-sensor-pcb
Sensor PCB for the Pico Datalogger-v2
39 partsCC-BY-SA-4.0 - 4 layers96.8 × 51 mm

Pocketmuseum edu v0
radutolontan/BASM_Pocket_Museum
The Pocket Lab is the next-generation approach to science education. Designed by the Bucharest Applied STEAM Museum, it brings scientific exploration into anyone's hands.
114 parts1 - 4 layers91 × 30.1 mm

Strelka Flight Computer
LulaUAV/Strelka-Flight-Computer
Strelka exists in the family of rocket dog flight computers. This flight computer is fully capable of deploying recovery events.
170 parts2 - 4 layers58.5 × 72.5 mm

- 4 layers29.2 × 47 mm

RFM95 Serial Converter PCB
s-park21/RFM95_Transparent_Serial
Code and PCB files for a RFM95W transparent serial device
43 parts
Questions
How big is the Picohttpsensor PCB PCB?
It measures 91.4 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Picohttpsensor PCB use?
59 parts, built around the AHT20, BH1750FVI-TR, TF-115 and AP2138N-3.3TRG1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Picohttpsensor PCB KiCad files?
From the AntonSangho/Picohttpsensor_PCB repository on GitHub, at the commit this page was made from: the board is v0_2_5/v0_2_5.kicad_pcb and its schematic v0_1/ChargerIC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Picohttpsensor PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask AntonSangho before reusing the design.