
Panel
jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

This Repository is a collection of NRF5x boards.
4layers is an open-source printed circuit board by jpconstantineau, from the jpconstantineau/NRF52-Board repository on GitHub, published under the BSD-3-Clause licence. It is a 4-layer board of 21.6 × 62.2 mm with 54 parts on 60 nets, routed with 294 tracks and 30 vias.
It is built around the E73-2G4M04S1B, CH340G and AP2112K-3.3, with the TP4056, MBR120 and P5102FM among its other parts. Its parts include 14 capacitors, 12 resistors, 10 diodes, 5 ICs and 3 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
This Repository is a collection of NRF5x boards.
TODO: remap folders...
| Hardware Name | PCB Folder name | Processor | Firmware | Circuit Diagram | Build Guide |
|---|---|---|---|---|---|
| LiPo Charger 3.3V Regulator | Batt_Charger_Regulator | n/a | n/a | Build Guide | |
| CR2032 Coin Cell Holder | Battery | n/a | n/a | Build Guide | |
| Mini Switch | MiniSwitch | n/a | n/a | Build Guide | |
| BlueMicro V1.x | EByte_E73 | NRF52832 | BlueMicro_BLE | Build Guide | |
| BlueMicro V2.0b | EByte_E73_Batt | NRF52832 | BlueMicro_BLE | Build Guide | |
| BlueMicro V2.0c | EByte_E73_Batt_ErgoTravel | NRF52832 | BlueMicro_BLE | Build Guide | |
| 4X4 backpack | EByte_E73_Batt_Macro_4x4 | NRF52832 | BlueMicro_BLE | Build Guide | |
| BlueMicro Tester | EByte_E73_tester | NRF52832 | Arduino | ||
| BlueMicro51 | YJ-14015 | NRF51822 | tbd |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1k | Resistor_SMD:R_0603_1608Metric | R2, R3, R4, R5, R6, R10 |
| 6 | TestPoint_Probe | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric | C3, C11, C12, C13 |
| 4 | RED | LED_SMD:LED_0603_1608Metric | D2, D5, D6, D10 |
| 3 | 100nF | Capacitor_SMD:C_0603_1608Metric | C6, C7, C9 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R7, R9 |
| 3 | 1N4148 | Diode_SMD:D_SOD-123 | D3, D4, D7 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C10 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C5, C8 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 100pF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 10uH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1nF | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 2M | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 806k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | BLUE | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | CH340G | Package_SO:SOP-16_4.4x10.4mm_P1.27mm | U2 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J9 |
| 1 | E73-2G4M04S | E73:E73-2G4M04S | U1 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D9 |
| 1 | MBR120 | Diode_SMD:D_SOD-123 | D8 |
| 1 | P5102FM | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | ProMicro | footprints:Pro_Micro | U5 |
| 1 | RESET | E73:SW_TACT_ALPS_SKQGABE010 | SW2 |
| 1 | TP4056 | Package_SO:SSOP-8_3.95x5.21x3.27mm_P1.27mm | U3 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J17 |

jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

accelerando-consulting/accelerando_barangaroo
This is a simple breakout board for the eByte E73 module with nrf52832 microcontroller. This board requires minimal parts, in fact it can work with only the module and no other parts.

ehuang2021/drone-fc
A drone flight controller, with multithreaded firmware, and a custom PCB





kbx81/kbxLEDController-16ch
kbx's 16-channel ESP-32 Powered LED Strip Controller

brendena/Nordic_Pebble_Steel
The goal of this project is to replace the main motherboard in the pebble steel with newer parts. Specifically the cpu will be a Nordic NRF52840.
It measures 21.6 × 62.2 mm and has 4 copper layers, 1.6 mm thick.
54 parts, built around the E73-2G4M04S1B, CH340G, AP2112K-3.3 and TP4056. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jpconstantineau/NRF52-Board repository on GitHub, at the commit this page was made from: the board is BlueMicro_tests/4layers.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).