Skip to the content
4 layers87.9 × 55.4 mmKIcad 9 ESP32 custom board, the printed circuit board in 3D

KIcad 9 ESP32 custom board

JoseSanchez122/ESP32_custom_board

Custom ESP32-WROOM-32 PCB with DHT22 (temperature/humidity), BH1750 (light), and MPU-6050 (motion) sensors, 3.3V regulator, USB-C/battery input, Wi-Fi/Bluetooth, GPIO/I2C pins, LED, and reset button, for compact IoT applications like monitoring and automation.

Size
87.9 × 55.4 mm
Copper layers
4
Thickness
1.6 mm
Parts
87
Nets
76
Pads
330
Tracks, vias
670, 131
Pours
14
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
12 Sep 2025
Updated
12 Sep 2025

Overview

KIcad 9 ESP32 custom board is an open-source printed circuit board by JoseSanchez122, from the JoseSanchez122/ESP32_custom_board repository on GitHub. It is a 4-layer board of 87.9 × 55.4 mm with 87 parts on 76 nets, routed with 670 tracks and 131 vias.

It is built around the ESP32-C3-WROOM-02-H4, MCP73871EV and BME280, with the MAX4466EXK+T, W25Q32JVSSIQ and GSD090012SEU among its other parts. Its parts include 32 resistors, 22 capacitors, 7 ICs, 6 diodes and 5 connectors. It belongs with the power and radio and wireless boards and the ESP32 and RISC-V boards of this library.

Main components

12

README

README.md

ESP32_custom_board

Custom ESP32-C3 PCB includes: ESP32-C3-WROOM-02 module, BME280 (temp/humidity/pressure), MAX4466 mic amp with CMC-5042PF-AC microphone, TEMT6000 light sensor, MCP73871 LiPo charger, LM1117 3.3V regulator, CP2102N USB-serial converter, W25Q32 flash memory, SD card slot, USB-C connector, battery connector, boot/reset buttons, LEDs, and GPIO headers.

image image

Parts

87
QtyValueFootprintReferences
120.1uFCapacitor_SMD:C_0805_2012MetricC1, C2, C5, C8, C10, C13, C14, C15, C16, C18, C20, C21
6470Resistor_SMD:R_0805_2012MetricR7, R8, R9, R10, R14, R18
510kResistor_SMD:R_0805_2012MetricR19, R30, R32, R33, R34
410uFESP32_Proyect_footprints:T491AC3, C4, C7, C12
41uFCapacitor_SMD:C_0805_2012MetricC6, C11, C19, C22
450Resistor_SMD:R_0805_2012MetricR15, R16, R20, R22
32kResistor_SMD:R_0805_2012MetricR5, R26, R28
3LTST-C170KRKTESP32_Proyect_footprints:LEDC2012X120NLED1, LED4, LED6
210KResistor_SMD:R_0805_2012MetricR1, R2
21MResistor_SMD:R_0805_2012MetricR27, R29
24.7kResistor_SMD:R_0805_2012MetricR24, R25
25k1Resistor_SMD:R_0805_2012MetricR3, R4
2BC817Package_TO_SOT_SMD:SOT-23Q2, Q3
2LTST-C170GKTESP32_Proyect_footprints:LEDC2012X120NLED2, LED5
10ZCH0110AF2EESP32_Proyect_footprints:FUSC3226X100NF1
1100KResistor_SMD:R_0805_2012MetricR31
110nFCapacitor_SMD:C_0805_2012MetricC17
117.5kResistor_SMD:R_0805_2012MetricR13
11kResistor_SMD:R_0805_2012MetricR11
120kResistor_SMD:R_0805_2012MetricR6
122.1kResistor_SMD:R_0805_2012MetricR12
14.7ufESP32_Proyect_footprints:T491AC9
1B2B-PH-SM4-TBESP32_Proyect_footprints:JST_B2B-PH-SM4-TBJ2
1BME280ESP32_Proyect_footprints:PSON65P250X250X100-8NU2
1BootESP32_Proyect_footprints:SW_USLPT2819DT2TRS1
1CMC-5042PF-ACESP32_Proyect_footprints:CUI_CMC-5042PF-ACMK1
1CP2102N-Axx-xQFN20Package_DFN_QFN:SiliconLabs_QFN-20-1EP_3x3mm_P0.5mm_EP1.8x1.8mmU4
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ4
1Conn_01x05_PinConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ5
1ESP32-C3-WROOM-02-H4ESP32_Proyect_footprints:MODULE_ESP32-C3-WROOM-02-H4U3
1GSD090012SEUESP32_Proyect_footprints:AMPHENOL_GSD090012SEUJ3
1LM1117MPX-3.3ESP32_Proyect_footprints:VREG_LM1117MPX-3.3VR1
1LTST-C170TBKTESP32_Proyect_footprints:LEDC2012X120NLED3
1MAX4466EXKESP32_Proyect_footprints:SOT65P210X110-5NU7
1MCP73871Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mmU1
1RResistor_SMD:R_0805_2012MetricR21
1ResetESP32_Proyect_footprints:SW_USLPT2819DT2TRS2
1SS-52400-003ESP32_Proyect_footprints:BELFUSE_SS-52400-002J1
1TEMT6000X01ESP32_Proyect_footprints:TRANS_TEMT6000X01Q1
1Test CSTestPoint:TestPoint_Pad_D1.0mmTP5
1Test CS_SDTestPoint:TestPoint_Pad_D1.0mmTP4
1Test MISOTestPoint:TestPoint_Pad_D1.0mmTP2
1Test MOSITestPoint:TestPoint_Pad_D1.0mmTP1
1Test SCLKTestPoint:TestPoint_Pad_D1.0mmTP3
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U5
1W25Q32JVSSIQESP32_Proyect_footprints:SOIC127P790X216-8NU6

The 85 most common of 87 parts.

Similar boards

  • 4 layers77.5 × 59.5 mmIOT, the printed circuit board in 3D

    IOT

    aryan-asit/Telemetry-iot-project

    In this project , a 4 layer custom pcb is made for Telematics

    85 parts1
  • 4 layers82.9 × 53.8 mmESP32 IoT Project, the printed circuit board in 3D

    ESP32 IoT Project

    EngMeesh/ESP32_IoT_Dev_Board

    A custom 4-layer IoT development board based on the ESP32-C3, featuring integrated LiPo battery management, a CP2102N USB-UART bridge, MicroSD support, and onboard environmental/audio sensors for embedded engineering…

    92 parts1MIT
  • 4 layers85.7 × 58.1 mmESP32 IoT 4-layer PCB, the printed circuit board in 3D

    ESP32 IoT 4-layer PCB

    SarthakDas2006/ESP32-C3-IoT-Embedded-Custom_PCB

    4-layer ESP32-C3 based custom embedded IoT PCB featuring onboard temperature & humidity, light, and audio sensing, USB Type-C, Li-Po charging, and external flash memory.

    89 parts1
  • 4 layers99.6 × 55.8 mmEsp32-sensor board, the printed circuit board in 3D

    Esp32-sensor board

    marwantm/esp32-sensor-board

    ESP32-C3 IoT sensor node with USB-C power path management — KiCad PCB design project

    86 parts
  • 4 layers81.4 × 53.2 mmIOT development board, the printed circuit board in 3D

    IOT development board

    vinod-gunda/4_layer_IOT_Development_Board

    4-layer ESP32-C3 development board designed using KiCad

    89 parts
  • 4 layers90 × 54 mmESP - 32 IOT PCB, the printed circuit board in 3D

    ESP - 32 IOT PCB

    Raghav9git/ESP-32-IoT-PCB-Board-

    A compact 4-layer IoT development board built around the ESP32-C3, integrating environmental sensing, local storage, USB-C power with LiPo battery management, and a programming/debug interface on a single board.

    82 partsMIT
  • 4 layers78.7 × 53.4 mmESP32-project, the printed circuit board in 3D

    ESP32-project

    pravinsharma15k-ops/ESP32-C3-Sensor-Board

    Battery-powered ESP32-C3 sensor board with USB-C charging, KiCad 10 design files

    88 parts1
  • 4 layers90 × 54.7 mm1st ESP32 Demo project, the printed circuit board in 3D

    1st ESP32 Demo project

    ashfaque-ur-rahman/ESP32-Multi-Sensor-PCB

    ESP32-based multi-sensor PCB with temperature/humidity, light, and microphone sensors — 4 layer Board — KiCad design based on Tech Explorations tutorial

    87 parts

Questions

How big is the KIcad 9 ESP32 custom board PCB?

It measures 87.9 × 55.4 mm and has 4 copper layers, 1.6 mm thick.

What parts does the KIcad 9 ESP32 custom board use?

87 parts, built around the ESP32-C3-WROOM-02-H4, MCP73871EV, BME280 and MAX4466EXK+T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the KIcad 9 ESP32 custom board KiCad files?

From the JoseSanchez122/ESP32_custom_board repository on GitHub, at the commit this page was made from: the board is KIcad_9_ESP32_custom_board.kicad_pcb and its schematic KIcad_9_ESP32_custom_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the KIcad 9 ESP32 custom board design in my own project?

Its repository states no licence, so its author keeps all rights: ask JoseSanchez122 before reusing the design.