2 layers142.2 × 125.7 mm
2 layers88.9 × 111.8 mm
ArdMiniProTester
jonsag/miscArduinoSome arduino code
- Size
- 88.9 × 111.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 48
- Nets
- 51
- Pads
- 122
- Tracks, vias
- 145, 0
- Pours
- 86
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 15 Dec 2014
- Updated
- 15 Aug 2025
Overview
ArdMiniProTester is an open-source printed circuit board by jonsag, from the jonsag/miscArduino repository on GitHub. It is a 2-layer board of 88.9 × 111.8 mm with 48 parts on 51 nets, routed with 145 tracks and 0 vias.
Its parts include 22 resistors, 22 diodes and 2 ICs.
README
README.mdmiscArduino
Some arduino code
avrdude
Uploading
Upload to ATmega2560
$ avrdude avrdude -v -q -p m2560 -c wiring -P /dev/ttyUSB0 -D -U flash:w:/path/to/image.hex:i
Upload to ATmega328 (Uno etc.)
$ avrdude -p m328p -c usbtiny -P /dev/ttyUSB0 -U flash:w:firmware.hex
Programmer / Chip Verification
$ avrdude -c usbtiny -p m168
If you see a 'Reading' progress bar, a device signature, and some other text, your settings are correct
Cheat sheets
Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 220R | My_Misc:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal_larger_pads | R1, R2, R3, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22 +6 |
| 22 | LED | My_Misc:LED_D5.0mm_large | D1, D2, D3, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22 +6 |
| 1 | Arduino_Mini_Pro | My_Arduino:Arduino_Pro_Mini_vC_no-progr-large | U1 |
| 1 | Power In | My_Parts:2-pole_power_in_screw_terminal | U2 |
| 1 | Rx | My_Parts:Jumper_1x02_P2.54mm_large | JP2 |
| 1 | Tx | My_Parts:Jumper_1x02_P2.54mm_large | JP1 |
More from jonsag/miscArduino
8- 2 layers143.5 × 114.3 mm
- 2 layers74 × 84 mm
- 2 layers122 × 110 mm
- 2 layers76.8 × 52.7 mm
- 2 layers112 × 40 mm
- 2 layers
- 2 layers76.8 × 31.8 mm
Similar boards
- 2 layers40 × 79.6 mm
ESP32 Transmitter and Receiver
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
48 parts915 - 2 layers
Demo
adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
48 parts547GPL-3.0 - 2 layers18.8 × 18.1 mm
- 2 layers48.1 × 115.6 mm
- 2 layers106 × 55 mm
Endcap
softerhardware/Hermes-Lite2
A second generation low-cost amateur HF software defined radio transceiver.
48 parts384 - 2 layers42.8 × 88 mm
18650 pcb
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
48 parts253GPL-3.0 - 2 layers34 × 44 mm
Clk lo buffer
loxodes/vna
Under development open hardware microwave vector network analyzer
48 parts205 - 2 layers70.6 × 189.2 mm
Nano
fellesverkstedet/fabricatable-machines
Motion systems for flexible digital fabrication and research. Easy to fabricate and customize. Documentation: https://github.com/fellesverkstedet/fabricatable-machines/wiki
48 parts175
Questions
How big is the ArdMiniProTester PCB?
It measures 88.9 × 111.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ArdMiniProTester use?
48 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ArdMiniProTester KiCad files?
From the jonsag/miscArduino repository on GitHub, at the commit this page was made from: the board is ardMiniProTester/ardMiniProTester.kicad_pcb and its schematic ATmega328-test-rig/ATmega328-test-rig.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ArdMiniProTester design in my own project?
Its repository states no licence, so its author keeps all rights: ask jonsag before reusing the design.