2 layers80 × 60 mm
2 layers
Projected
jonnor/projects45Small projects not worthy of dedicated repositories
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 49
- Pads
- 178
- Tracks, vias
- 467, 52
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Sep 2014
- Updated
- 7 Nov 2026
Overview
Projected is an open-source printed circuit board by jonnor, from the jonnor/projects repository on GitHub. It is a 2-layer board with 46 parts on 49 nets, routed with 467 tracks and 52 vias.
It is built around the STM32L432KBU6, PCA9306DCUR and BC847CL. Its parts include 16 resistors, 11 capacitors, 7 ICs, 5 connectors and 1 diode. It belongs with the robots and motor control boards and the STM32 boards of this library.
Main components
3
STM32L432KBU6
UFQFPN-32(5x5)-40℃~+85℃ 1.71V~3.6V 128KB 12bit 12bit 26 32 Bit 64KB 80MHz ARM Cortex-M4 Built-in FLASH UFQFPN-32(5x5) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
PCA9306DCUR
VSSOP-8-40℃~+85℃ 1 1.2V~3.3V 1.8V~5.5V 2 Auto Direction Detection Bidirectional Push-Pull、Open-drain VSSOP-8 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
BC847CL
SOT-23-55℃~+150℃ 1 NPN 100MHz 100mA 250mV 300mW 420 45V 5uA 6V NPN SOT-23 Bipolar (BJT) ROHSonsemiBipolar (BJT)
README
README.mdMisc projects. Electronics, physical/mechanical, software. 3d-models, schematics, scripts.
Introspectable computing
Flow-based-programming
Open hardware
- TapeCore / TapeXY, an laserengraver and CNC motion platform
- Idda, a reverse-engineered ciruclar knitting machine.
Digital fabrication tools
Other interests
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C3, C4, C5, C6, C7, C8, C9, C10, C11 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R11, R13, R14 |
| 3 | R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R8, R9 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5, R6 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2 |
| 2 | 3k3 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R15, R16 |
| 2 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7, R12 |
| 1 | 22k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4 |
| 1 | 330k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R10 |
| 1 | 4.7uH | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1 |
| 1 | BC847CL | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1 |
| 1 | DOCK | projected:Pins_1x06_P1.27mm | J3 |
| 1 | EXT | projected:Pins_1x06_P1.27mm | J6 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | LED_CLK | projected:TestPoint_Mini | TP2 |
| 1 | LED_DATA | projected:TestPoint_Mini | TP3 |
| 1 | LIR2450 | projected:LIR2450-horizontal-pins | BT1 |
| 1 | LIS2DE12TR | Package_LGA:LGA-12_2x2mm_P0.5mm | U6 |
| 1 | Leds | projected:Pins_1x04_P1.27mm | J4 |
| 1 | MCP1640BT-I/CHY | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | MCP73812T-420I-OT | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | MIC | projected:XDCR_CMM-4030DT-26154-TR | U7 |
| 1 | PCA9306DCUR | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U3 |
| 1 | STM32L432KBU6 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U1 |
| 1 | SWD | projected:Pins_1x06_P1.27mm | J5 |
| 1 | TOUCH | projected:Pins_1x04_P1.27mm | J1 |
| 1 | TPS7A0533PDBVT | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | TestPoint | projected:TestPoint_Mini | TP1 |
Questions
What parts does the Projected use?
46 parts, built around the STM32L432KBU6, PCA9306DCUR and BC847CL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Projected KiCad files?
From the jonnor/projects repository on GitHub, at the commit this page was made from: the board is jewelry/projected/projected/projected.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Projected design in my own project?
Its repository states no licence, so its author keeps all rights: ask jonnor before reusing the design.
More from jonnor/projects
12- 2 layers66 × 50 mm
- 2 layers45.4 × 71.7 mm
- 2 layers
- 2 layers45.7 × 22.2 mm
- 2 layers17 × 17 mm
- 2 layers
- 2 layers83.6 × 21.5 mm
- 2 layers
- 2 layers5 × 40 mm
- 2 layers10 × 10 mm
- 2 layers
Similar boards
- 4 layers61.8 × 27.5 mm
Audio Processing HW V1.0
aitesam961/OpenADSP
An Embedded Digital Signal Processing Device for Audio signals.
83 parts4GPL-3.0 - 4 layers39 × 15 mm
- 4 layers41.7 × 16.6 mm
- 2 layers71 × 31 mm
STM32L4 Project
MishayNaidoo/Traffic-Monitoring-Using-Doppler-Radar
This repository details an investigation conducted by Mishay Naidoo for his EEE4022S Final year engineering project. The aim of the project was to design a traffic monitoring system using a low-cost Doppler radar.
39 partsGPL-3.0 - 4 layers39 × 15 mm
STM RF project
Nisitha529/PCB-Design-for-STM32-based-RF-Design
For the data interface, the USB D+ and D- lines are routed directly from the connector through a USBLC6-2SC6 ESD protection chip.
39 parts - 2 layers59.8 × 96.6 mm
Fraduino
XiangYyang/Fraduino
A replica of Fraduino (http://yuki-factory.main.jp/moe-pcb.html), with a different microcontroller.
82 partsGPL-2.0 - 2 layers51.5 × 20 mm
- 2 layers53.3 × 73.7 mm
