4 layers39 × 15 mm
4 layers41.7 × 16.6 mm
ST RF
amaraoussama94/ST_RFSTM32_RF_Nordic
- Size
- 41.7 × 16.6 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 50
- Pads
- 168
- Tracks, vias
- 336, 61
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Jan 2021
- Updated
- 23 Jan 2021
Overview
ST RF is an open-source printed circuit board by amaraoussama94, from the amaraoussama94/ST_RF repository on GitHub. It is a 4-layer board of 41.7 × 16.6 mm with 38 parts on 50 nets, routed with 336 tracks and 61 vias.
It is built around the STM32L432KBU6, NRF24L01P-R and USBLC6-2SC6, with the XC6206P332MR among its other parts. Its parts include 18 capacitors, 5 resistors, 3 ICs, 3 connectors and 3 inductors. It belongs with the radio and wireless boards and the STM32 boards of this library.
Main components
4
STM32L432KBU6
UFQFPN-32(5x5)-40℃~+85℃ 1.71V~3.6V 128KB 12bit 12bit 26 32 Bit 64KB 80MHz ARM Cortex-M4 Built-in FLASH UFQFPN-32(5x5) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
NRF24L01P-R
QFN-20-EP(4x4)-40℃~+85℃ -82dBm 0dBm 1.9V~3.6V 11.3mA 13.5mA 2.4GHz 2.4GHz~2.525GHz 2Mbps ISM Power-on reset function、Supports RSSI function、CRC check function、Automatic response function、Automatic retransmission function SPI transceiver QFN-20-EP(4x4) RF Transceiver ICs ROHSNordic SemiconRF Transceiver ICs
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
XC6206P332MR
SOT-23-40℃~+85℃@(Ta) 1 1uA 200mA 3.3V 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdST_RF
STM32_RF_Nordic/ -stm32l432kb Nordic_NRF24L01
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitor_SMD:C_0402_1005Metric | C15, C16, C17, C18 |
| 3 | 10nF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C6 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2, C5, C7 |
| 2 | 12pF | Capacitor_SMD:C_0402_1005Metric | C8, C10 |
| 2 | 2k2 | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 1 | 100 @100MHz | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | 100mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 16Mhz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 1pF | Capacitor_SMD:C_0402_1005Metric | C13 |
| 1 | 1pF5 | Capacitor_SMD:C_0402_1005Metric | C12 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C14 |
| 1 | 22k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 2nF2 | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 2nH7 | Inductor_SMD:L_0402_1005Metric | L3 |
| 1 | 33nF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 3nH9 | Inductor_SMD:L_0402_1005Metric | L2 |
| 1 | 4pF7 | Capacitor_SMD:C_0402_1005Metric | C11 |
| 1 | 8nH2 | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | ARM 10 pins | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J3 |
| 1 | GRE | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | SMA | Connector_Coaxial:SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | J2 |
| 1 | STM32L432KBU6 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U3 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:TSOT-23-6 | U2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J1 |
| 1 | XC6206P332MR | Package_TO_SOT_SMD:SOT-23 | RG1 |
| 1 | YEL | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | nRF24L01P | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U1 |
Questions
How big is the ST RF PCB?
It measures 41.7 × 16.6 mm and has 4 copper layers, 1.6 mm thick.
What parts does the ST RF use?
38 parts, built around the STM32L432KBU6, NRF24L01P-R, USBLC6-2SC6 and XC6206P332MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ST RF KiCad files?
From the amaraoussama94/ST_RF repository on GitHub, at the commit this page was made from: the board is STRF.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ST RF design in my own project?
Its repository states no licence, so its author keeps all rights: ask amaraoussama94 before reusing the design.
Similar boards
- 4 layers39 × 15 mm
STM RF project
Nisitha529/PCB-Design-for-STM32-based-RF-Design
For the data interface, the USB D+ and D- lines are routed directly from the connector through a USBLC6-2SC6 ESD protection chip.
39 parts - 4 layers39 × 31 mm
- 4 layers61.8 × 27.5 mm
Audio Processing HW V1.0
aitesam961/OpenADSP
An Embedded Digital Signal Processing Device for Audio signals.
83 parts4GPL-3.0 - 4 layers38.1 × 15 mm
ST RF
alphaseneca/pcb_design_repo
A repository for storing and documenting the pcb design files.
38 parts1MIT - 2 layers71 × 31 mm
STM32L4 Project
MishayNaidoo/Traffic-Monitoring-Using-Doppler-Radar
This repository details an investigation conducted by Mishay Naidoo for his EEE4022S Final year engineering project. The aim of the project was to design a traffic monitoring system using a low-cost Doppler radar.
39 partsGPL-3.0 - 4 layers50.8 × 69.9 mm
- 4 layers54.6 × 20.8 mm
R.F.-Transceiver PCB
ad-astra-et-ultra/R.F.-Transceiver-PCB
STM32 based radio-frequency transceiver PCB for IoT applications on KiCad
38 parts2MIT