Skip to the content
2 layers146.3 × 134.6 mmYetis, the printed circuit board in 3D

Yeti ergonomic split keyboard

Size
146.3 × 134.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
67
Nets
49
Pads
322
Tracks, vias
624, 0
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
23 Aug 2022
Updated
15 Jul 2024

Overview

Yetis is an open-source printed circuit board by jogme, from the jogme/yetis-keyboard repository on GitHub. It is a 2-layer board of 146.3 × 134.6 mm with 67 parts on 49 nets, routed with 624 tracks and 0 vias.

It is built around the WS2812B. Its parts include 12 diodes, 2 connectors and 1 IC. It belongs with the keyboards and input boards of this library.

Main components

1

README

README.md

YetiS 34 key split keyboard

Who likes wrist pain anyway?

Available at https://www.jogmekeebs.com/

Concepts

The main goals for this keyboard were:

  • A split keyboard for bigger hands
  • As little wrist movement as possible
  • Natural hand position

Features

  • QMK support (hopefully)
  • diodeless
  • columnar stagger
  • top pinky switch moved to the side for better reachability
  • OLED support
  • LEDs on the bottom

Shopping list

This repository includes the pcb and a case design. To build a functioning keyboard you will need other than that:

  • 2x elite-c or similiar microcontrollers
  • 2x TRRS PJ-320A connectors
  • 34x cherry switches
  • 2x OLEDs (optional)
  • 12x WS2812b LEDs (optional)

Map

Real life printable layout can be found in the main directory of this repository named layout.pdf. It is suggested to first try the layout and positioning of the keyboard to see if it's suitable for your hands before doing any shopping. (The collectors are always welcome:)

Render pictures of the pcb case version

Pictures of the alpha version

Parts

67
QtyValueFootprintReferences
17cherry switchPCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00uswitch18, switch19, switch20, switch21, switch22, switch23, switch24, switch25, switch26, switch27, switch28, switch29, switch30, switch31, switch32, switch33 +1
17cherry switchSwitch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00uswitch1, switch2, switch3, switch4, switch5, switch6, switch7, switch8, switch10, switch11, switch12, switch13, switch14, switch15, switch16, switch17 +1
12WS2812BKeebio-Parts:WS2812BD1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12
2GNDJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmGND_B1, GND_T1
2LOGOart:yeti_picG***, G***
2SCLJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmSCL_B1, SCL_T1
2SDAJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmSDA_B1, SDA_T1
2VCCJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmVCC_B1, VCC_T1
1AudioJackKeebio-Parts:TRRS-PJ-320AJ1
1AudioJackyeti:TRRS-PJ-320AJ2
1OledConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalOled1
1~yeti:froodU2

The 60 most common of 67 parts.

Similar boards

  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 2 layers26 × 30 mmMicrocontroller, the printed circuit board in 3D

    Microcontroller

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    34 parts1.1kCC-BY-4.0
  • 4 layers82.6 × 82.5 mmJumperless2, the printed circuit board in 3D

    Jumperless2

    Architeuthis-Flux/Jumperless

    A jumperless breadboard

    208 parts914
  • 2 layers95.3 × 161.9 mmDfh badge, the printed circuit board in 3D

    Dfh badge

    tanaes/whopping_Voron_mods

    135 parts787GPL-3.0
  • 2 layers42.8 × 28.8 mmMM Skirt, the printed circuit board in 3D

    MM Skirt

    PrintersForAnts/Micron

    If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)

    11 parts741GPL-3.0
  • 2 layers149.6 × 127.1 mmErgodash, the printed circuit board in 3D

    Ergodash

    omkbd/ErgoDash

    keyboard

    187 parts732MIT
  • 2 layers285.5 × 95 mmReviung46 ver1 1, the printed circuit board in 3D

    Reviung46 ver1 1

    gtips/reviung

    The REVIUNG41 is 41-key column staggered keyboard.

    119 parts517MIT
  • 2 layers177.7 × 144.5 mmCOMM PANEL, the printed circuit board in 3D

    COMM PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    275 parts431

Questions

How big is the Yetis PCB?

It measures 146.3 × 134.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Yetis use?

67 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Yetis KiCad files?

From the jogme/yetis-keyboard repository on GitHub, at the commit this page was made from: the board is pcb/yetis.kicad_pcb and its schematic case/bottom_plate/yetis_bottom.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Yetis design in my own project?

Its repository states no licence, so its author keeps all rights: ask jogme before reusing the design.