2 layers67 × 100 mm
Npr revB
slintak/NPR70
The New Packet Radio on 70 cm band. Based on the project NPR from F4HDK.
136 parts23GPL-3.0
2 layers15.2 × 36.4 mm
Jackson
joelpmichael/saml-jackson- Size
- 15.2 × 36.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 47
- Pads
- 196
- Tracks, vias
- 420, 41
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 20 Jun 2023
- Updated
- 22 Jun 2023
Overview
Jackson is an open-source printed circuit board by joelpmichael, from the joelpmichael/saml-jackson repository on GitHub. It is a 2-layer board of 15.2 × 36.4 mm with 45 parts on 47 nets, routed with 420 tracks and 41 vias.
It is built around the TPS63000DRC, NSR05T30XV2 and PRTR5V0U2X. Its parts include 13 capacitors, 11 resistors, 6 connectors, 2 ICs and 2 diodes. It belongs with the SAM D and SAM boards of this library.
Main components
3
TPS63000DRC
UncategorisedTexas Instruments
NSR05T30XV2
SOD-523-55℃~+150℃ 30V 370mV@500mA 3A 500mA 52uA@30V Independent SOD-523 Schottky Diodes ROHSonsemiSchottky Diodes
PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
README.mdREADME
Nothing here yet...
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1u 10V X7R | Capacitor_SMD:C_0402_1005Metric | C2, C3, C5, C7, C8, C9 |
| 5 | 10u 10V X7R | Capacitor_SMD:C_0603_1608Metric | C1, C6, C10, C11, C12 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R3, R6, R7 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | 5.1k 1% | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5, J6 |
| 2 | Conn_01x13_Pin | Connector_PinHeader_2.54mm:PinHeader_1x13_P2.54mm_Vertical | J3, J4 |
| 1 | 100R | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 180k 1% | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 1M 1% | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 1u 10V X7R | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 2.2u | Inductor_SMD:L_1008_2520Metric | L1 |
| 1 | 220R@100MHz | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 4.7n 50V X7R | Capacitor_SMD:C_0402_1005Metric | C13 |
| 1 | ATSAML21E18B-MUT | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U1 |
| 1 | BOOT | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW2 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J2 |
| 1 | NSR05T30XV2 | Diode_SMD:D_SOD-523 | D2 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | D1 |
| 1 | RESET | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | TPS63000 | Package_SON:Texas_DRC0010J_ThermalVias | U2 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
The 38 most common of 45 parts.
Questions
How big is the Jackson PCB?
It measures 15.2 × 36.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Jackson use?
45 parts, built around the TPS63000DRC, NSR05T30XV2 and PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Jackson KiCad files?
From the joelpmichael/saml-jackson repository on GitHub, at the commit this page was made from: the board is jackson.kicad_pcb and its schematic jackson.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Jackson design in my own project?
Its repository states no licence, so its author keeps all rights: ask joelpmichael before reusing the design.
Similar boards
- 2 layers50 × 30 mm
PL18 int multiprotocol
richardclli/DIY-PL18-InternalMPM
An internal MPM (Multi-Protocol Module) for PL18 Mod
23 parts3GPL-3.0 - 4 layers152.4 × 63.5 mm
- 2 layers62 × 129 mm
Esp32-main
nicolaeandreivasile/bike-embedded-app
Embedded application for bikes that collect and display various riding data.
93 parts1 - 4 layers
- 2 layers50.8 × 101.6 mm
CASE
awetzelkern/CASE
Miminal flight computer designed to be a stepping-stone into creating PCB hardware and software for a fully custom thrust-vectored rocket.
57 parts - 2 layers39.3 × 51.7 mm
Devboard
bobis1/devboard
I made this project because I wanted some experience working with devboards before I start something more complex. I also wanted to make something where a microcontroller was on a devboard already.
45 parts - 4 layers74.1 × 130 mm
