2 layers66 × 67 mm
AC Controller
Qeteshpony/AC-Controller
Universal WiFi-Based remote control for IoT Devices
88 partsBSD-2-Clause
4 layers
Dronie
Aadi775/MicroDrone- Copper layers
- 4
- Thickness
- 1.57 mm
- Parts
- 81
- Nets
- 115
- Pads
- 394
- Tracks, vias
- 166, 8
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 24 Mar 2026
- Updated
- 24 Mar 2026
Overview
Dronie is an open-source printed circuit board by Aadi775, from the Aadi775/MicroDrone repository on GitHub. It is a 4-layer board with 81 parts on 115 nets, routed with 166 tracks and 8 vias.
It is built around the BMP388, MT3608 and ESP32-C6-MINI-1, with the ICM-42688-P, TPS63000DRC and AO3400A among its other parts. Its parts include 27 resistors, 21 capacitors, 9 connectors, 7 ICs and 5 transistors. It belongs with the ESP32, STM32 and RISC-V boards of this library.
Main components
7
BMP388
LGA-10(2x2)-40℃~+85℃ 1.65V~3.6V 1pa/K 2uA 30Kpa~1.25bar 50pa 8pa I2C、SPI LGA-10(2x2) Pressure Sensors ROHSBosch SensortecPressure Sensors
MT3608
SOT-23-6-40℃~+85℃ 1 1.2MHz 100uA、1.6mA 2A 2V~24V Adjustable Boost Boost Built-in No SOT-23-6 DC-DC Converters ROHS西安航天民芯DC-DC Converters
ESP32-C6-MINI-1
SMD,13.2x16.6mmSMD,13.2x16.6mm New Arrivals ROHSEspressif SystemsUncategorised
ICM-42688-P
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 2KB 7.5uA IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps Motion Event Detection, Synchronization, Timestamp Support LGA-14(2.5x3) Accelerometers ROHSTDK InvenSenseAccelerometers
TPS63000DRC
UncategorisedTexas Instruments
AO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky Diodes
Parts
81| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10uF | Capacitor_SMD:C_0805_2012Metric | C4, C10, C11, C12, C13, C18, C21, C22, C23, C24 |
| 6 | Conn_01x02_Socket | Connector_Samtec_HPM_THT:Samtec_HPM-02-01-x-S_Straight_1x02_Pitch5.08mm | J2, J3, J5, J6, J7, J9 |
| 5 | 100k | Resistor_SMD:R_1206_3216Metric | R7, R8, R9, R10, R27 |
| 5 | 100nF | Capacitor_SMD:C_0805_2012Metric | C14, C15, C16, C17, C25 |
| 5 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R2, R15, R16, R19 |
| 5 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5 |
| 4 | 10 | Resistor_SMD:R_0805_2012Metric | R3, R4, R5, R6 |
| 4 | 1N5819WS | Diode_SMD:D_SOD-323 | D1, D2, D3, D5 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R17, R18, R20 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C6, C9 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric | R25, R26 |
| 2 | 3.3uF | Capacitor_SMD:C_0805_2012Metric | C2, C20 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric | R12, R13 |
| 2 | 5.5k | Resistor_SMD:R_0805_2012Metric | R23, R24 |
| 2 | Conn_01x02_Socket | Connector:JWT_A3963_1x02_P3.96mm_Vertical | J1, J8 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW3, SW4 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric | R11 |
| 1 | 120R | Resistor_SMD:R_0805_2012Metric | FB1 |
| 1 | 180k | Resistor_SMD:R_1206_3216Metric | R14 |
| 1 | 1M | Resistor_SMD:R_1206_3216Metric | R21 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 2.2uH | Inductor_SMD:L_1206_3216Metric | L1 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C19 |
| 1 | 4.7uH | Inductor_SMD:L_1210_3225Metric | L2 |
| 1 | 600R | Resistor_SMD:R_0805_2012Metric | FB2 |
| 1 | 680k | Resistor_SMD:R_1206_3216Metric | R22 |
| 1 | BMP388 | BMP388:PQFN50P200X200X80-10N | U4 |
| 1 | BOOT | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | ESP32-C6-MINI-1 | RF_Module:ESP32-C6-MINI-1 | U2 |
| 1 | ICM-42688-P | ICM-42688-P:PQFN50P300X250X97-14N | U3 |
| 1 | MT3608 | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | RST | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW2 |
| 1 | STM32F411CCUx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | SX1276 | Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm | U5 |
| 1 | TPS63000 | Package_SON:Texas_DRC0010J_ThermalVias | U7 |
| 1 | USB_C_Plug_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4085 | P1 |
Questions
What parts does the Dronie use?
81 parts, built around the BMP388, MT3608, ESP32-C6-MINI-1 and ICM-42688-P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dronie KiCad files?
From the Aadi775/MicroDrone repository on GitHub, at the commit this page was made from: the board is Dronie/Dronie.kicad_pcb and its schematic Dronie/Dronie.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dronie design in my own project?
Its repository states no licence, so its author keeps all rights: ask Aadi775 before reusing the design.
Similar boards
- 4 layers38 × 74 mm
Stratosdrone
equationstratos/STRATOSDRONES
A 4-layer, 36×70 mm Tello-style portrait controller board for the STRATOSDRONE: chip-down ESP32-P4 (flight + camera + hardware H.264) with an ESP32-C6-MINI-1 Wi-Fi co-processor, IMU / barometer / ToF / optical-flow…
115 parts - 4 layers42 × 42 mm
VayuF7
ishantmahatopro/Vayu-F722
Custom 42x42mm 4-layer STM32F722 FPV flight controller for 5in and 7in cinematic and telemetry quads.
146 partsMIT - 6 layers43.6 × 43 mm
VENDETTAFC
Caped-Crussader/VENDETTAFC
A fully open-source, custom-designed 4-in-1 ESC and F7 Flight Controller stack for FPV multirotors, designed from scratch in KiCad.
191 parts31CERN-OHL-S-2.0 - 4 layers40 × 55 mm
CopterCat cm4
matveylapin/CopterCat_cm4
Полётный контроллер для стандарта FMU-v6u. Обычно на дронах для программирования устанавливают полётный контроллер, одноплатный компьютер и иногда arduino.
164 parts3Apache-2.0 - 2 layers83.7 × 53.7 mm
- 2 layers107.7 × 84.4 mm
TEG
Lazztech/TEG
Electronics for a thermal energy harvesting prototype: a small TEG array feeds a sub-1 V energy-harvesting front-end (BQ25504), which charges a buffer capacitor and backs up a regulated 5 V rail for a Noctua 5 V PWM fan…
33 parts - 4 layers152.4 × 63.5 mm
