

Hal9000mainboard
HAL9000 Inspired robot
- Size
- 40 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 32
- Pads
- 75
- Tracks, vias
- 117, 14
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 14 Oct 2024
- Updated
- 16 Nov 2024
Overview
Hal9000mainboard is an open-source printed circuit board by joelgott, from the joelgott/GRAD9000 repository on GitHub. It is a 2-layer board of 40 × 60 mm with 23 parts on 32 nets, routed with 117 tracks and 14 vias.
It is built around the DFR0299. Its parts include 6 connectors, 3 resistors, 2 capacitors, 2 ICs and 2 diodes. It belongs with the robots and motor control boards and the ESP32 and RISC-V boards of this library.
Main components
1README
README.mdDescription
This project is strongly inspired by the HAL9000 robot from Stanley Kubrick's 2001 Space Odyssey. I used an ESP32 based board for the main logic and an audio module so that it looks like it's talking. Most of the mechanical parts are recicled or 3D printed. This repository contains all the contents for making and programming the robot.
Hardware
This robot uses a seed studio XIAO ESP32-c3 development board with a DFPlayer audio module. In the PCB folder there is a custom designed PCB that contains both boards, recieves a 5V input and has, a servo controller connector, an i2c bus output, a rgb led pinout and a speaker output. There is also a socket for an adxl345 accelerometer and other audio output that can go to an amplifier.
Software
In the Circuitpython folder there is the code that runs on the robot. There are two files, the one called eyetest lets me play with the rgb led to try animations and such. The other one called grad9000 contains the logic for controlling the audio module, reading the json file and switching the green led while maintaining the red one permanently on so that it looks like it's talking.
Extras
I also made a python script that lets you generate a json file that contains the information of the audio files. This json file can then be uploaded to the robot so it knows the duration of each audio file and how many are in each folder.
Contributing
Pull requests are welcome. For major changes, please open an issue first to discuss what you would like to change.
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | TestPoint | TestPoint:TestPoint_Pad_3.0x3.0mm | TP1001, TP1002, TP1003, TP1004 |
| 3 | 100 | Resistor_SMD:R_0603_1608Metric | R1001, R1002, R1003 |
| 2 | 22uF x 25V X7R 1210 | Capacitor_THT:C_Rect_L4.0mm_W2.5mm_P2.50mm | C1, C1001 |
| 2 | Conn_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1003, J1004 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1001 |
| 1 | Conn_01x02 | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_2-G-3.81_1x02_P3.81mm_Vertical | J1001 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1005 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1002 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1006 |
| 1 | DFR0299 | DFR0299:MODULE_DFR0299 | U1001 |
| 1 | LED_GKBR | LED_THT:LED_D5.0mm-4_RGB_Wide_Pins | D1003 |
| 1 | MOUDLE-SEEEDUINO-XIAO-ESP32C3 | footprints_esp:XIAO-Generic-Hybrid-14P-2.54-21X17.8MM | U1002 |
The 19 most common of 23 parts.
Similar boards
- 2 layers104.7 × 135.6 mm

- 2 layers145.4 × 70 mm

- 2 layers48.2 × 28.3 mm

- 2 layers210 × 140 mm

- 2 layers9 × 25 mm

ModularPowerSupply
Animal-Crate/Animal-Crate
This is a public repository for the Animal Crate project. Please review the README for more information.
35 parts2AGPL-3.0 - 2 layers99.1 × 99.1 mm

Bs base
MelexinVN/bs_kombo_bs
Электронная беспроводная система для проведения интеллектуальных игр на микроконтроллерах stm32 и радиомодулях nrf24l01+.
30 parts2GPL-3.0 - 2 layers25 × 100 mm

Lightsaber
BamdadKh/ArduinoLightsaber
A lightsaber prop built around an Arduino Nano on a custom PCB. It has a 144-LED blade, sound from a DFPlayer Mini, swing detection with an MPU-6050, a small OLED and two buttons. I built it for a Halloween costume.
15 parts1MIT - 2 layers127 × 83.5 mm

Audiostation
janikkaden/self-sufficient-audio-station
A solar-powered, self-sufficient audio station for outdoor exhibitions — ESP32 + DFPlayer, wakes from deep sleep on a button press and plays info tracks in three languages plus music.
28 parts1GPL-3.0
Questions
How big is the Hal9000mainboard PCB?
It measures 40 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hal9000mainboard use?
23 parts, built around the DFR0299. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hal9000mainboard KiCad files?
From the joelgott/GRAD9000 repository on GitHub, at the commit this page was made from: the board is PCB/hal9000mainboard.kicad_pcb and its schematic PCB/hal9000mainboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hal9000mainboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask joelgott before reusing the design.