2 layers104.7 × 135.6 mm
2 layers104.7 × 135.6 mm
DiscAdventure
Trikkitt/polygen13PolyGen game repository
- Size
- 104.7 × 135.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 61
- Nets
- 73
- Pads
- 205
- Tracks, vias
- 535, 55
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 20 May 2024
- Updated
- 17 Feb 2026
Overview
DiscAdventure is an open-source printed circuit board by Trikkitt, from the Trikkitt/polygen repository on GitHub. It is a 2-layer board of 104.7 × 135.6 mm with 61 parts on 73 nets, routed with 535 tracks and 55 vias.
It is built around the DFR0299, ESP-M1 and FAN53610AUC33X, with the PAM2310BECADJR, LMK212BJ106KG-T and MGSF2N02EL among its other parts. Its parts include 22 resistors, 11 capacitors, 7 connectors, 5 ICs and 4 switches. It belongs with the PIC boards of this library.
Main components
6
DFR0299
THroughholeTHroughhole V-Audio Modules ROHSDFRobotV-Audio Modules
ESP-M1
SMD,15x12.3mm-40℃~+85℃ -96dBm 15dBm 2.4GHz 3.3V 375mA 55mA PCB UART WIFI4 SMD,15x12.3mm WiFi Modules ROHSDOITWiFi Modules
FAN53610AUC33X
WLCSP-6(0.9x1.2)-40℃~+85℃@(TA) 1 1A 2.3V~5.5V 26uA 3.3V 3MHz Buck Built-in Fixed Overcurrent Protection、Light load efficient mode、Output discharge、Cycle-by-cycle current limiting、Frequency synchronization Step-down type Yes WLCSP-6(0.9x1.2) DC-DC Converters ROHSonsemiDC-DC Converters
PAM2310BECADJR
SO-8-EP-40℃~+125℃ 1 1.5MHz~1.8MHz 2.7V~5.5V 2A 42uA 600mV~5.5V Adjustable Buck Buck Built-in Yes SO-8-EP DC-DC Converters ROHSDiodes IncorporatedDC-DC Converters
LMK212BJ106KG-T
080510V 10uF X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSTaiyo YudenMultilayer Ceramic Capacitors MLCC - SMD/SMT
MGSF2N02EL
SOT-23-55℃~+150℃ 1 N-channel 1.25W 115mΩ@2.5V 130pF 150pF 1V 2.8A 20V 3.5nC@4V 45pF N-Channel SOT-23 MOSFETs ROHSonsemiMOSFETs
README
README.mdThe folders are as follows:
3D Models : Contains the STL files for the casing and information about the physical assembly
PIC : Contains the source code and compiled .HEX file for the PIC Microcontroller used by the game
Micropython : Contains the Micropyhon code used by the ESP8285 used by the game
PCB : Contains the KiCAD PCB design used in each of the game units
Game : Contains the primary game code including database
Sounds: The audio files played by the game units, along with some source / raw media.
The 3D model was designed using Tinkercad. The URL for the 2024 design is https://www.tinkercad.com/things/fUl2xMWVo1S-polygen-case-2024-final and the 2025 design https://www.tinkercad.com/things/fGMrmOF5N9D-polygen-case-2025-final and this repository contains the export STL files from Tinkercad.
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1K | Resistor_SMD:R_0603_1608Metric | R7, R14, R15, R16, R17 |
| 4 | 22uF | Capacitor_SMD:C_0805_2012Metric | C1, C3, C9, C11 |
| 3 | 100R | Resistor_SMD:R_0603_1608Metric | R8, R11, R18 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R4 |
| 3 | 150k | Resistor_SMD:R_0603_1608Metric | R5, R21, R24 |
| 3 | Battery_Cell | MJT-General:BatteryHolder_1x18650_TH | BT1, BT2, BT4 |
| 3 | LMK212BJ106KG-T | Capacitor_SMD:C_0805_2012Metric | C4, C6, C8 |
| 3 | MGSF2N02EL | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q4 |
| 2 | 20k | Resistor_SMD:R_0603_1608Metric | R6, R23 |
| 2 | 220R | Resistor_SMD:R_0603_1608Metric | R12, R13 |
| 2 | C_Polarized | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C5, C10 |
| 1 | 100pF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 1uH | Inductor_SMD:L_1008_2520Metric | L2 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 2.2uH | SamacSys_Parts:INDPM7466X300N | L1 |
| 1 | 220K | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 2M | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 680k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | Antenna Cable | MountingHole:MountingHole_3.7mm | H3 |
| 1 | Charger | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J8 |
| 1 | DFR Speaker | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J4 |
| 1 | DFR0299 | DFR0299:MODULE_DFR0299 | U3 |
| 1 | ESP Diag | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical_SMD_Pin1Left | J1 |
| 1 | ESP-M1 | ESP:ESP-M1 | U1 |
| 1 | FAN53610AUC33X | SamacSys_Parts:BGA6C40P2X3_86X116X62 | IC2 |
| 1 | Fuse | Fuse:Fuse_0603_1608Metric | F1 |
| 1 | Neopixel PIC1 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J3 |
| 1 | Neopixel PIC2 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J7 |
| 1 | Orientation Guide 1 | MountingHole:MountingHole_3.2mm_M3_DIN965 | H2 |
| 1 | Orientation Guide 2 | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1 |
| 1 | PAM2310BECADJR | SamacSys_Parts:SOIC127P600X163-9N | IC3 |
| 1 | PIC Diag | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical_SMD_Pin1Left | J6 |
| 1 | PIC16LF15356T-I_SS | Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm | IC1 |
| 1 | Power On | MJT-General:SW_DIP_SPSTx01_Piano_10.8x4.1mm_W7.62mm_P2.54mm | SW1 |
| 1 | RFID Reader | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | Reset | MJT-General:SW_DIP_SPSTx01_Piano_10.8x4.1mm_W7.62mm_P2.54mm | SW2 |
| 1 | Tamper | MJT-General:Microswitch TH 90 Degree Right | SW4 |
| 1 | Tamper | MJT-General:Microswitch TH | SW3 |
More from Trikkitt/polygen
2- 2 layers74.8 × 32.7 mm
Similar boards
- 2 layers82.2 × 101.3 mm
- 4 layers199.8 × 150 mm
- 2 layers260.4 × 118.7 mm
- 2 layers145.4 × 70 mm
- 2 layers48.2 × 28.3 mm
- 2 layers210 × 140 mm
- 2 layers9 × 25 mm
ModularPowerSupply
Animal-Crate/Animal-Crate
This is a public repository for the Animal Crate project. Please review the README for more information.
35 parts2AGPL-3.0 - 2 layers99.1 × 99.1 mm
Bs base
MelexinVN/bs_kombo_bs
Электронная беспроводная система для проведения интеллектуальных игр на микроконтроллерах stm32 и радиомодулях nrf24l01+.
30 parts2GPL-3.0
Questions
How big is the DiscAdventure PCB?
It measures 104.7 × 135.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DiscAdventure use?
61 parts, built around the DFR0299, ESP-M1, FAN53610AUC33X and PAM2310BECADJR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DiscAdventure KiCad files?
From the Trikkitt/polygen repository on GitHub, at the commit this page was made from: the board is PCB/DiscAdventure.kicad_pcb and its schematic PCB/DiscAdventure.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DiscAdventure design in my own project?
Its repository states no licence, so its author keeps all rights: ask Trikkitt before reusing the design.