

Bs base
Электронная беспроводная система для проведения интеллектуальных игр на микроконтроллерах stm32 и радиомодулях nrf24l01+. Electronic wireless system for conducting intellectual games on microcontrollers stm32 and radio modules nrf24l01+
- Size
- 99.1 × 99.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 66
- Pads
- 188
- Tracks, vias
- 652, 80
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 20 Jun 2024
- Updated
- 5 Jan 2025
Overview
Bs base is an open-source printed circuit board by MelexinVN, from the MelexinVN/bs_kombo_bs repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 99.1 × 99.1 mm with 30 parts on 66 nets, routed with 652 tracks and 80 vias.
It is built around the DFR0299. Its parts include 6 ICs, 6 switches, 4 connectors, 3 capacitors and 2 resistors. It belongs with the STM32 boards of this library.
Main components
1README
pcb/bs_base_v.1.0/README.mdПлата базы для "Брейн системы"
- интерактивный перечень элементов - папка bom
- файлы для производства - папка production
- гербер-файлы - bs_button.zip (облако)

Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | SW_MEC_5G | Button_Switch_THT:SW_PUSH_6mm_H13mm | SW3, SW4, SW5, SW6 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C4 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | AudioJack2_Dual_Ground_Switch | Connector_Audio:Jack_3.5mm_CUI_SJ1-3525N_Horizontal | J4 |
| 1 | Battery_Cell | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | Conn_01x15 | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J5 |
| 1 | DFR0299 | sam:MODULE_DFR0299 | U3 |
| 1 | LCD-20X4B | LCD-20X4B:LCD_LCD-20X4B_i2c | DS2 |
| 1 | MT3608 module | sam:MT3608 module | U1 |
| 1 | NRF24L01_Breakout | sam:nRF24L01_PA_LNA_Breakout | U7 |
| 1 | NRF24L01_smd | Keyplus_nordic:NRF24L01-Module-SMD | U4 |
| 1 | RF_Module:nRF24L01_PA_LNA_ceramic | sam:nRF24L01_PA_LNA_Breakout_smd | U6 |
| 1 | ST7735S module | sam:st7735s module | J2 |
| 1 | SW_Push_DPDT | Button_Switch_THT:SW_Push_2P2T_Toggle_CK_PVA2xxH1xxxxxxV2 | SW1 |
| 1 | SW_SPDT | Button_Switch_THT:SW_Slide_1P2T_CK_OS102011MS2Q | SW2 |
| 1 | TP4056 module | sam:TP4056-18650 | DS1 |
| 1 | YAAJ_BluePill_Part_Like | sam:YAAJ_BluePill_1 | U2 |
The 26 most common of 30 parts.
Similar boards
- 2 layers104.7 × 135.6 mm

- 2 layers145.4 × 70 mm

- 2 layers48.2 × 28.3 mm

- 2 layers210 × 140 mm

- 2 layers9 × 25 mm

ModularPowerSupply
Animal-Crate/Animal-Crate
This is a public repository for the Animal Crate project. Please review the README for more information.
35 parts2AGPL-3.0 - 2 layers25 × 100 mm

Lightsaber
BamdadKh/ArduinoLightsaber
A lightsaber prop built around an Arduino Nano on a custom PCB. It has a 144-LED blade, sound from a DFPlayer Mini, swing detection with an MPU-6050, a small OLED and two buttons. I built it for a Halloween costume.
15 parts1MIT - 2 layers127 × 83.5 mm

Audiostation
janikkaden/self-sufficient-audio-station
A solar-powered, self-sufficient audio station for outdoor exhibitions — ESP32 + DFPlayer, wakes from deep sleep on a button press and plays info tracks in three languages plus music.
28 parts1GPL-3.0 - 2 layers91 × 55 mm

Questions
How big is the Bs base PCB?
It measures 99.1 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bs base use?
30 parts, built around the DFR0299. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bs base KiCad files?
From the MelexinVN/bs_kombo_bs repository on GitHub, at the commit this page was made from: the board is pcb/bs_base_v.1.0/bs_base.kicad_pcb and its schematic pcb/bs_base_v.1.0/bs_base.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bs base design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).