
MetodAdapter12V
Jochen0x90h/LedStrip
Receiver and voltage regulator for LED strips based on WS2812 or equivalent

Receiver and voltage regulator for LED strips based on WS2812 or equivalent
Regulator is an open-source printed circuit board by Jochen0x90h, from the Jochen0x90h/LedStrip repository on GitHub, published under the MIT licence. It is a 2-layer board of 10 × 16 mm with 8 parts on 7 nets, routed with 66 tracks and 4 vias.
It is built around the TPS82130SIL. Its parts include 3 connectors, 2 capacitors, 2 resistors and 1 IC. It belongs with the power and lEDs and displays boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x05_Socket | local:Holes | J1, J2 |
| 1 | 10k | local:0603 | R2 |
| 1 | 10u | local:1206 | C1 |
| 1 | 22u | local:0805 | C2 |
| 1 | 52k3 | local:0603 | R1 |
| 1 | Conn_01x02 | local:Kyocera-009176002001906 | J3 |
| 1 | TPS82130 | local:TPS82130 | U1 |

Jochen0x90h/LedStrip
Receiver and voltage regulator for LED strips based on WS2812 or equivalent

Jochen0x90h/LedStrip
Receiver and voltage regulator for LED strips based on WS2812 or equivalent

Jochen0x90h/LedStrip
Receiver and voltage regulator for LED strips based on WS2812 or equivalent

Jochen0x90h/LedStrip
Receiver and voltage regulator for LED strips based on WS2812 or equivalent

Jochen0x90h/LedStrip
Receiver and voltage regulator for LED strips based on WS2812 or equivalent

JanM321/esphome-lg-controller
Wired controller for LG HVAC units using ESPHome and ESP32


variegated-coffee/open-lcc-board
Schematics and PCB files for the Open LCC hardware

variegated-coffee/all-purpose-espresso-controller
Espresso electronics are usually proprietary affairs with little to no expandability. The purpose of this project is to give everyone an open source alternative with lots of features and flexibility.

lnsru/melexis_VGA_ToF_camera
PCB design with the new MLX75027 VGA time of flight sensor

Jochen0x90h/RoomControl
Smart home room controller based on nRF52840 with MQTT and and IEEE 802.15.4 radio support. Buttons and relays for lights and roller shutters can also be connected with a local bus using LIN physical layer


It measures 10 × 16 mm and has 2 copper layers, 1.6 mm thick.
8 parts, built around the TPS82130SIL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Jochen0x90h/LedStrip repository on GitHub, at the commit this page was made from: the board is pcb/regulator17V5Vold/regulator.kicad_pcb and its schematic pcb/Adapter5V/Adapter5V.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).