
Matrix kbd to ps2
costarc/CP400_COLOR_FPGA
PCB Kit (modular) to fit the Brazilian CP 400 Color case

PCB Desgin for converter that converts USB MIDI to regular MIDI based on hobbytronics.co.uk USB Host IC and software
USB MIDI is an open-source printed circuit board by jochemvdmeulen, from the jochemvdmeulen/USB-MIDI repository on GitHub, published under the MIT licence. It is a 2-layer board of 53 × 72 mm with 38 parts on 30 nets, routed with 287 tracks and 20 vias.
It is built around the PIC24FJ64GB002-I/SS, 74AHC1G125GW and FT232RL. Its parts include 10 capacitors, 8 resistors, 6 connectors, 5 ICs and 4 diodes. It belongs with the audio and music boards and the PIC boards of this library.
PCB Desgin for converter that converts USB MIDI to regular MIDI based on hobbytronics.co.uk USB Host IC and software
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C3, C4, C5, C6, C7 |
| 4 | 220 | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R2, R3, R4 |
| 3 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C8, C9, C10 |
| 2 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R7, R8 |
| 2 | 18pF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C2 |
| 2 | 470 | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R5, R6 |
| 1 | 16MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 1N4148 | Diode_SMD:D_SOD-123 | D1 |
| 1 | 6N138 | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U2 |
| 1 | 74AHC1G125 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U3 |
| 1 | Accept LED | LED_THT:LED_D3.0mm | D3 |
| 1 | Error LED | LED_THT:LED_D3.0mm | D4 |
| 1 | FT232RL | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U4 |
| 1 | FTDI Header | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | MIDI In | USB MIDI:din-5 | J1 |
| 1 | MIDI Out | USB MIDI:din-5 | J2 |
| 1 | PIC24FJ64GB002 | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U1 |
| 1 | PICkit Header | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | Power LED | LED_THT:LED_D3.0mm | D2 |
| 1 | USB_A | USB MIDI:FCI_87520-0010BLF | J3 |
| 1 | USB_B | USB MIDI:FCI_61729-1011BLF | J4 |
The 34 most common of 38 parts.

costarc/CP400_COLOR_FPGA
PCB Kit (modular) to fit the Brazilian CP 400 Color case

Loic74650/ioBoard
A relay (and more!) board with Ethernet connectivity and MQTT support

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.


jsphuebner/inverter-hardware
Eagle schematics of inverter main board, sensor boards and gate drivers


maholli/SAM32
Feather-sized SAMD51 with M4 core serving as UART bridge to WROOM ESP32

spel-uchile/balloon_experiment
Radiosonde platform to develop, test and integrate payloads for the future CubeSats missions
It measures 53 × 72 mm and has 2 copper layers, 1.6 mm thick.
38 parts, built around the PIC24FJ64GB002-I/SS, 74AHC1G125GW and FT232RL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jochemvdmeulen/USB-MIDI repository on GitHub, at the commit this page was made from: the board is USB MIDI/USB MIDI.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).