
0jss148hm relay breakout 2x9 panel
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
Fan pwm disconnecter panel 2x9 is an open-source printed circuit board by CRImier, from the CRImier/MyKiCad repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 82.5 × 94 mm with 382 parts on 16 nets, routed with 2,160 tracks and 180 vias.
It is built around the 74AHC1G125GW. Its parts include 72 connectors, 36 resistors, 18 capacitors, 18 ICs and 18 switches. It belongs with the interfaces and adapters boards of this library.
This is a start for reimplementing the Framework Mainboard. Currently, this board is a USB-C DP altmode to Framework display adapter, using the same connector and pinout that the Framework mainboard uses.
This adapter is currently going through the testing process, with a number of fundamental fixes scheduled for the v3 version.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 72 | MountingHole | fan_pwm_disconnecter:MountingHole_2mm | H1, H1, H1, H1, H1, H1, H1, H1, H1, H1, H1, H1, H1, H1, H1, H1 +56 |
| 72 | NO | fan_pwm_disconnecter:SolderJumper-2_P1.3mm_Open_Pad1.0x1.0mm | JP1, JP1, JP1, JP1, JP1, JP1, JP1, JP1, JP1, JP1, JP1, JP1, JP1, JP1, JP1, JP1 +56 |
| 36 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1 +20 |
| 18 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1 +2 |
| 18 | 74AHC1G125 | Package_TO_SOT_SMD:SOT-353_SC-70-5_Handsoldering | U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1 +2 |
| 18 | EN | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3 +2 |
| 18 | GND | TestPoint:TestPoint_Pad_1.0x1.0mm | TP2, TP2, TP2, TP2, TP2, TP2, TP2, TP2, TP2, TP2, TP2, TP2, TP2, TP2, TP2, TP2 +2 |
| 18 | IN | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1 +2 |
| 18 | OUT | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2 +2 |
| 18 | PWM_IN | TestPoint:TestPoint_Pad_1.0x1.0mm | TP3, TP3, TP3, TP3, TP3, TP3, TP3, TP3, TP3, TP3, TP3, TP3, TP3, TP3, TP3, TP3 +2 |
| 18 | PWM_OUT | TestPoint:TestPoint_Pad_1.0x1.0mm | TP4, TP4, TP4, TP4, TP4, TP4, TP4, TP4, TP4, TP4, TP4, TP4, TP4, TP4, TP4, TP4 +2 |
| 18 | SW | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J4, J4, J4, J4, J4, J4, J4, J4, J4, J4, J4, J4, J4, J4, J4, J4 +2 |
| 18 | SW_SPST | Button_Switch_SMD:SW_SPDT_PCM12 | SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1 +2 |
| 18 | VCC | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP1, TP1, TP1, TP1, TP1, TP1, TP1, TP1, TP1, TP1, TP1, TP1, TP1, TP1, TP1 +2 |
| 4 | Fiducial_1mm_Mask2mm | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3, FID4 |

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.


jsphuebner/inverter-hardware
Eagle schematics of inverter main board, sensor boards and gate drivers


maholli/SAM32
Feather-sized SAMD51 with M4 core serving as UART bridge to WROOM ESP32

spel-uchile/balloon_experiment
Radiosonde platform to develop, test and integrate payloads for the future CubeSats missions

Loic74650/ioBoard
A relay (and more!) board with Ethernet connectivity and MQTT support


particle-iot/particle-bamf23-badge
Particle's Bay Area Maker Faire 2023 Water Balloon Badge
It measures 82.5 × 94 mm and has 2 copper layers, 1.6 mm thick.
382 parts, built around the 74AHC1G125GW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CRImier/MyKiCad repository on GitHub, at the commit this page was made from: the board is Laptop mods/fan_pwm_disconnecter/fan_pwm_disconnecter_panel_2x9.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).