2 layers80 × 50 mm
Thermal Camera
Circuit-Digest/MLX90640-Thermal-Camera
An Open Source Thermal Imaging IR camera that you can build yourserlf
66 parts94
2 layers96 × 63 mm
An electronics dice with BluetoothLE connectivity.
- Size
- 96 × 63 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 76
- Nets
- 125
- Pads
- 465
- Tracks, vias
- 810, 293
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Dec 2024
- Updated
- 18 Dec 2024
Overview
Dice is an open-source printed circuit board by jobitjoseph, from the jobitjoseph/BLE-Dice repository on GitHub. It is a 2-layer board of 96 × 63 mm with 76 parts on 125 nets, routed with 810 tracks and 293 vias.
It is built around the NINA-B306-00B, MIC5219-3.3YM5 and MPU-6050, with the TP4056, B2B-PH-SM4-TB(LF)(SN) and SS34 among its other parts. Its parts include 31 resistors, 24 diodes, 10 capacitors, 7 ICs and 2 connectors.
Main components
7
NINA-B306-00B
SMD-55PSMD-55P Bluetooth Modules ROHSu-bloxBluetooth Modules
MIC5219-3.3YM5
SOT23-53.3V 500mA Peak Output Low Drop-Out (LDO) RegulatorMicrochip TechnologyUncategorised
MPU-6050
QFN-24-EP(4x4)-40℃~+85℃ 16bit 1KB 2.375V~3.46V 5uA Accelerometer Gyroscope I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(4x4) Accelerometers ROHSTDK InvenSenseAccelerometers
TP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery Management
B2B-PH-SM4-TB(LF)(SN)
SMD,P=2mm-25℃~+85℃ 1 100V 1x2P 2 2A 2P 2mm 6.6mm 7.95mm 7mm Auxiliary Solder Pin Beige Copper alloy PA PH Surface Mount,Vertical Tin UL94V-0 SMD,P=2mm Wire To Board Connector ROHSJSTWire To Board Connector
SS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky DiodesTS-1088R-02526
SMD,4x3mm100,000 cycles 12V 2.5mm 2.6N 2.93mm 3.9mm 50mA Black Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,4x3mm Tactile Switches ROHSXUNPUTactile Switches
README
README.mdBLE-Dice
An electronics dice with BluetoothLE connectivity.
Click here For other ESP32 tutorials.
[Note: As this project is very simple we are only providing the code, schematic, and a few essential images if you want to get the images or code explanations do check out the Circuit Digest website.
Parts
76| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 1K | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21 +5 |
| 20 | POW_LED | LED_SMD:LED_0805_2012Metric | LED2, LED3, LED4, LED5, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21 +4 |
| 7 | 10k | Resistor_SMD:R_0603_1608Metric | R22, R24, R27, R31, R32, R33, R34 |
| 2 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C9, C10 |
| 2 | 0.1uf | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 2 | 1.3K | Resistor_SMD:R_0603_1608Metric | R25, R26 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | CHG | LED_SMD:LED_0603_1608Metric | LED22, LED23 |
| 1 | B2B-PH-SM4-TB(LF)(SN) | Connector_PinSocket_2.00mm:PinSocket_1x02_P2.00mm_Vertical_SMD_Pin1Right | J2 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric | U2 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 10uf | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 3.3K | Resistor_SMD:R_0603_1608Metric | Rprog1 |
| 1 | 4.7k | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | 470pF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | AO3041 | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | LED_RAGB | LEDRGB1615CA:LED-ARRAY-SMD_4P-L1.6-W1.5-BR_XL-1615RGBC-RF | D2 |
| 1 | MIC5219-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | MPU-6050 | MPU6050:MPU6050 | U4 |
| 1 | NINA-B306-00B | NINA-B306-00B:NINAB30600B | IC1 |
| 1 | SS34 | Diode_SMD:D_SMA | D1 |
| 1 | TP4056 | tp4056:SOIC127P600X175-9N | IC2 |
| 1 | TS-1088R-02526 | 3x4x2:Tactile 3x4x2mm TS-A010 | SW1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | ~ | Cube:Cube | U5 |
Similar boards
- 2 layers90 × 60 mm
Schem
Abhey-05/Thermal-Camera
Thermal Camera A compact, low-cost thermal imaging solution built for diagnostic, repair, and monitoring applications in electronics, industrial safety, and embedded systems.
60 parts - 2 layers100 × 100 mm
ESP drone
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
130 parts915 - 4 layers81 × 61 mm
- 2 layers100 × 57 mm
- 2 layers100.4 × 99.2 mm
Espdroneea
sushrutchhatkuli/Custom-ESP32-drone-PCB
Designed a custom ESP32-WROOM-32–based drone flight controller PCB featuring USB-C charging, regulated 3.3 V power delivery, and onboard IMU sensing using the MPU-6050.
121 parts1 - 2 layers208 × 58 mm
- 2 layers146.2 × 99 mm
FPVRover
Circuit-Digest/ESP32-Cam-Surveillance-Car
Watch full video on ESP32 surveillance car
35 parts15
Questions
How big is the Dice PCB?
It measures 96 × 63 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Dice use?
76 parts, built around the NINA-B306-00B, MIC5219-3.3YM5, MPU-6050 and TP4056. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dice KiCad files?
From the jobitjoseph/BLE-Dice repository on GitHub, at the commit this page was made from: the board is Hardware/Dice.kicad_pcb and its schematic Hardware/Dice.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dice design in my own project?
Its repository states no licence, so its author keeps all rights: ask jobitjoseph before reusing the design.