
Schem
Abhey-05/Thermal-Camera
Thermal Camera A compact, low-cost thermal imaging solution built for diagnostic, repair, and monitoring applications in electronics, industrial safety, and embedded systems.

Thermal Camera A compact, low-cost thermal imaging solution built for diagnostic, repair, and monitoring applications in electronics, industrial safety, and embedded systems.
Schem is an open-source printed circuit board by Abhey-05, from the Abhey-05/Thermal-Camera repository on GitHub. It is a 2-layer board of 90 × 60 mm with 60 parts on 56 nets, routed with 499 tracks and 109 vias.
It is built around the ESP32-WROVER-E(4MB), CH340K and MIC5219-3.3YM5, with the TP4056, TS-1088R-02526 and B2B-PH-SM4-TB(LF)(SN) among its other parts. Its parts include 21 resistors, 11 capacitors, 7 ICs, 6 switches and 4 diodes. It belongs with the ESP32 boards of this library.
Thermal cameras play a critical role in detecting temperature anomalies, benchmarking heat performance, and assisting in electronic hardware debugging. Commonly used in defense, predictive maintenance, and the repair industry, thermal imaging enables faster and safer identification of faults such as short circuits or overheating components. Our project aims to replicate these capabilities at a fraction of the market cost.
We began by understanding the working principles of thermal cameras and the core requirements of a low-cost system. The MLX90640 thermal sensor was selected for its high sensitivity and compact resolution, while the 2.4” TFT display offered a visually rich and user-friendly interface.
We wrote firmware from scratch to handle thermal data acquisition, color mapping, and display control using an ESP32 microcontroller. All SPI and I2C communication protocols were manually configured and tested for stability. We then implemented SD card image storage and added support for selectable color palettes and refresh rates.
The enclosure and power management were developed in parallel. A custom battery management system was integrated to allow portability, and the housing was designed to be compact yet thermally stable. The complete schematic and PCB were designed in KiCad.
https://github.com/user-attachments/assets/c0b89b00-765c-46c9-96d5-a79226db0dfd
https://github.com/user-attachments/assets/fa7a4603-ffcd-4ff7-a3ee-2d5423cac2e8
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R6, R13, R15, R19 |
| 5 | 4.7k | Resistor_SMD:R_0603_1608Metric | R9, R12, R14, R16, R17 |
| 4 | 100K | Resistor_SMD:R_0603_1608Metric | R5, R10, R11, U3 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_ISO7380_Pad | H1, H2, H3, H4 |
| 3 | 0.1uf | Capacitor_SMD:C_0603_1608Metric | C1, C6, C11 |
| 3 | TS-1088R-02526 | THERMAL_CAMERA_LIBRARY:4_TERMINAL_SWITCH_TC | SW4, SW5, SW6 |
| 2 | 1.3K | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C2, C9 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | CHG | LED_SMD:LED_0603_1608Metric | LED2, LED3 |
| 2 | TS-1088R-02526 | THERMAL_CAMERA_LIBRARY:2_TACTILE | SW1, SW2 |
| 1 | 0.1UF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 10R | Resistor_SMD:R_0805_2012Metric | R20 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 10uf | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 1uf | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 2N27002DW | THERMAL_CAMERA_LIBRARY:2N7002DW_SOT363_TC | U2 |
| 1 | 3.3K | Resistor_SMD:R_0603_1608Metric | Rprog1 |
| 1 | 470R | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 470pF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | AO3041 | THERMAL_CAMERA_LIBRARY:AO3401_SOT23_TC | U4 |
| 1 | B2B-PH-SM4-TB(LF)(SN) | Connector_JST:JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J2 |
| 1 | Conn_01x14 | Connector_PinSocket_2.54mm:PinSocket_1x14_P2.54mm_Vertical | J4 |
| 1 | ESP32-WROVER-E | THERMAL_CAMERA_LIBRARY:ESP32WROVEREN8R8_TC | U6 |
| 1 | K3-1280S-F1 | THERMAL_CAMERA_LIBRARY:slide_switch_TC | SW3 |
| 1 | MIC5219-3.3YM5 | THERMAL_CAMERA_LIBRARY:MIC5219_SOT95P280X145-5N_TC | U5 |
| 1 | MLX90640 | THERMAL_CAMERA_LIBRARY:MLX90640_ESFBAB000SP_TC | U7 |
| 1 | POW_LED | LED_SMD:LED_0603_1608Metric | LED1 |
| 1 | S8050 | THERMAL_CAMERA_LIBRARY:TRANS_SS8050-G_TC | Q1 |
| 1 | SS34 | THERMAL_CAMERA_LIBRARY:SS34_DIODE_NEW | D1 |
| 1 | Stemma | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J3 |
| 1 | TP4056 | THERMAL_CAMERA_LIBRARY:TP4056_SOP127P600X175-9N_TC | IC1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | ch340k | THERMAL_CAMERA_LIBRARY:ch340k_TC | U1 |
| 1 | microSD_TF-01A | THERMAL_CAMERA_LIBRARY:sdcard_reader_TC | SD1 |

Abhey-05/Thermal-Camera
Thermal Camera A compact, low-cost thermal imaging solution built for diagnostic, repair, and monitoring applications in electronics, industrial safety, and embedded systems.

Circuit-Digest/MLX90640-Thermal-Camera
An Open Source Thermal Imaging IR camera that you can build yourserlf

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!





Circuit-Digest/ESP32-Cam-Surveillance-Car
Watch full video on ESP32 surveillance car

It measures 90 × 60 mm and has 2 copper layers, 1.6 mm thick.
60 parts, built around the ESP32-WROVER-E(4MB), CH340K, MIC5219-3.3YM5 and TP4056. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Abhey-05/Thermal-Camera repository on GitHub, at the commit this page was made from: the board is KiCad Files/schem/backup_og/schem.kicad_pcb and its schematic KiCad Files/schem/backup_og/schem.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Abhey-05 before reusing the design.