
ESP drone
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Esp32 quad baro bootser nousb BMP is an open-source printed circuit board by T-ABISHEK, from the T-ABISHEK/Quad-PCB-For-Production repository on GitHub. It is a 2-layer board of 45 × 45 mm with 68 parts on 72 nets, routed with 792 tracks and 114 vias.
It is built around the ESP32-WROOM-32, BMP280 and MIC5219-3.3YM5, with the MPU-6050, 1N4148W and K3-1280S-F1 among its other parts. Its parts include 22 resistors, 17 capacitors, 11 diodes, 7 connectors and 5 ICs. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R6, R10, R11, R12, R14, R18, R19, R20, R21 |
| 6 | 1uf | Capacitor_SMD:C_0603_1608Metric | C6, C10, C15, C16, C17, C18 |
| 4 | 0.1uf | Capacitor_SMD:C_0603_1608Metric | C7, C11, C12, C13 |
| 4 | 1N4148W | Diode_SMD:D_SOD-323 | D2, D3, D4, D5 |
| 4 | Conn_01x02_Female | Connector_Hirose:Hirose_DF13-02P-1.25DSA_1x02_P1.25mm_Vertical | J2, J4, J5, J6 |
| 4 | SI2302DS-T1 | S8050:SOT95P240X115-3N | T1, T2, T3, T4 |
| 3 | 100K | Resistor_SMD:R_0603_1608Metric | R2, U4, U5 |
| 3 | 1K | Resistor_SMD:R_0603_1608Metric | R15, R16, R17 |
| 3 | 470R | Resistor_SMD:R_0603_1608Metric | R1, R30, R31 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | LED4, LED5, LED6 |
| 3 | POW_LED | LED_SMD:LED_0603_1608Metric | LED1, LED7, LED8 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C1, C4 |
| 2 | 10uf | Capacitor_SMD:C_0603_1608Metric | C9, C14 |
| 2 | Conn_01x06_Female | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J8, J9 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 4.7k | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 470pF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | BMP280 | Package_LGA:Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering | U1 |
| 1 | Conn_01x02_Pin | Connector_Molex:Molex_Micro-Latch_53253-0270_1x02_P2.00mm_Vertical | J1 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U8 |
| 1 | K3-1280S-F1 | SHOU HAN MSK-03-HB 125:SW-SMD_MSK-03-HB | SW1 |
| 1 | LOGO | drone:logo | G*** |
| 1 | MIC5219-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | MPU-6050 | drone:mpu6050 | U9 |
| 1 | SS34 | Diode_SMD:D_SMA | D1 |
| 1 | ~ | drone:BS01 | U2 |

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


Circuit-Digest/MLX90640-Thermal-Camera
An Open Source Thermal Imaging IR camera that you can build yourserlf

Abhey-05/Thermal-Camera
Thermal Camera A compact, low-cost thermal imaging solution built for diagnostic, repair, and monitoring applications in electronics, industrial safety, and embedded systems.

sushrutchhatkuli/Custom-ESP32-drone-PCB
Designed a custom ESP32-WROOM-32–based drone flight controller PCB featuring USB-C charging, regulated 3.3 V power delivery, and onboard IMU sensing using the MPU-6050.


FrancoStrappazzon/Drones
Repositorio para proyectos de drones, desde el más simple hasta mas complejos

It measures 45 × 45 mm and has 2 copper layers, 1.6 mm thick.
68 parts, built around the ESP32-WROOM-32, BMP280, MIC5219-3.3YM5 and MPU-6050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the T-ABISHEK/Quad-PCB-For-Production repository on GitHub, at the commit this page was made from: the board is esp32_quad_baro_bootser_nousb_BMP.kicad_pcb and its schematic esp32_quad_baro_bootser_nousb_BMP.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask T-ABISHEK before reusing the design.