
Peerhof Uni CC1101 Light
jnissen/CC101
ESP MCU with CC1101 868 MHz Wireless Funk Modul Transciever

ESP MCU with CC1101 868 MHz Wireless Funk Modul Transciever
Peerhof Uni cc1101 is an open-source printed circuit board by jnissen, from the jnissen/CC101 repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 60 × 50 mm with 21 parts on 23 nets, routed with 101 tracks and 0 vias.
It is built around the CC1101RGP, WEMOS D1 MINI and DHT11. Its parts include 5 connectors, 3 ICs, 1 capacitor, 1 resistor and 1 diode. It belongs with the ESP8266 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | , , , , | ||
| 1 | 470K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | AC-05-3 | MyLib:HLK-PM01-AC-05-3 | U1 |
| 1 | Antenna_Shield | Connector_Coaxial:SMA_Wurth_60312002114503_Vertical | AE1 |
| 1 | CC1101 | Homebrew:CC1101 | U2 |
| 1 | C_Polarized_Small | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | DHT11 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | LED | LED_THT:LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O3.81mm_Z1.6mm | D1 |
| 1 | Rx/Tx | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_RND:TerminalBlock_RND_205-00241_1x02_P10.16mm_Horizontal | J1 |
| 1 | ToF(D1/D2) | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | WeMos_D1_mini | wemos-d1-mini:wemos-d1-mini-with-pin-header-and-connector | U3 |
The 17 most common of 21 parts.

jnissen/CC101
ESP MCU with CC1101 868 MHz Wireless Funk Modul Transciever

mitchins/ESP-Aquarium-Water-Sensor
A simple water flow and quality sensor for aquariums based on ESP controller



vineethjkatti-tech/iplanter
iplanter is a smart planter which uses moisture and temperature sensor to display the health of the plant on an OLED display.

rwlloyd/stupid-solar-thing
Solar powered Wifi Sensor Based on ESP8266 microcontroller

Rodemfr/MicronetToNMEA
A NMEA 0183 converter for Raymarine's wireless instruments ... and much more !


jp112sdl/HB-Dis-EP-42BW
4.2" ePaper Display mit 10 Tasterkanälen für Homematic
It measures 60 × 50 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the CC1101RGP, WEMOS D1 MINI and DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jnissen/CC101 repository on GitHub, at the commit this page was made from: the board is CC1101-ESP8266-D1-Mini-With Power Supply/Peerhof-Uni-cc1101.kicad_pcb and its schematic CC1101-ESP-8266-D1-Mini/Peerhof-Uni-CC1101 Light.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).