2 layers148 × 84.5 mm
Panel daisy
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
259 parts410
2 layers70 × 70 mm
MicroNet Teensy4
Rodemfr/MicronetToNMEA34A NMEA 0183 converter for Raymarine's wireless instruments ... and much more !
- Size
- 70 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 53
- Pads
- 91
- Tracks, vias
- 96, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 12 Mar 2021
- Updated
- 5 Nov 2026
Overview
MicroNet Teensy4 is an open-source printed circuit board by Rodemfr, from the Rodemfr/MicronetToNMEA repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 70 × 70 mm with 13 parts on 53 nets, routed with 96 tracks and 0 vias.
It is built around the CC1101RGP and R-78E5.0-0.5. Its parts include 6 ICs, 1 capacitor and 1 diode. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
2
CC1101RGP
QFN-20-EP(4x4)-116dBm -40℃~+85℃ 1.8V~3.6V 12.3mA 12dBm 14.3mA 600Kbps ISM SPI QFN-20-EP(4x4) RF Transceiver ICs ROHSTexas InstrumentsRF Transceiver ICs
R-78E5.0-0.5
SIP,11.5x7.6mm-300mA、500mA -5V、5V 1 330uF、680uF 6.5V~36V、7V~31V 81%、90% Buck Short Circuit Protection SIP,11.5x7.6mm DC-DC Power Modules ROHSYLPTECDC-DC Power Modules
README
hardware/v1/readme.mdKICAD schematic and pcb
STL for suitable case
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 1 | 100µF 16V | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 1N4004 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | CC1101 | _Arduino_module:CC1101 | U2 |
| 1 | GY-511 | _Arduino_module:GY-511 | U3 |
| 1 | HC-06 | _Arduino_module:HC-06 | U6 |
| 1 | R-78E5.0-0.5 | Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT | U5 |
| 1 | Screw_Terminal_01x02 | Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.5_1x02_P3.50mm_Horizontal | + 12V - |
| 1 | Teensy4.0 | Teensy:Teensy40 | U1 |
| 1 | UBLOX M8N Module | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | U4 |
Similar boards
- 2 layers63 × 58 mm
OPNpool r5
cvonk/OPNpool
Integrates the functionality of a Pentair pool controller into the smart home using ESP32 SoC.
17 parts102 - 2 layers68.6 × 53.3 mm
Protogasm Board V2
Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.
14 parts67MIT - 4 layers231 × 67 mm
- 2 layers127 × 114.3 mm
- 4 layers58.4 × 101.9 mm
Up5k osc
emeb/up5k_osc
The brute-force approach is to synthesize these analog waveforms at sufficiently high sample rates that the timing jitter becomes imperceptible.
137 parts36MIT - 4 layers19 × 111.1 mm
Gliss main
BelaPlatform/gliss-hardware
You can find the source KiCad files for the Gliss module in this repository. This project is open hardware and under the Creative Commons Share Alike license 4.0.
107 parts18 - 4 layers38.1 × 101.6 mm
ESP32S2 Audio
emeb/ESP32S2_Audio
A Eurorack module demonstrating the use of the ESP32S2 as an audio effects processor
124 parts8MIT
Questions
How big is the MicroNet Teensy4 PCB?
It measures 70 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MicroNet Teensy4 use?
13 parts, built around the CC1101RGP and R-78E5.0-0.5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MicroNet Teensy4 KiCad files?
From the Rodemfr/MicronetToNMEA repository on GitHub, at the commit this page was made from: the board is hardware/v1/MicroNet-Teensy4.kicad_pcb and its schematic hardware/v1/MicroNet-Teensy4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MicroNet Teensy4 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).