
AquariumSensor
mitchins/ESP-Aquarium-Water-Sensor
A simple water flow and quality sensor for aquariums based on ESP controller

iplanter is a smart planter which uses moisture and temperature sensor to display the health of the plant on an OLED display.
Iplanter is an open-source printed circuit board by vineethjkatti-tech, from the vineethjkatti-tech/iplanter repository on GitHub. It is a 2-layer board of 52.3 × 52.7 mm with 5 parts on 16 nets.
It is built around the WEMOS D1 MINI and DHT11. Its parts include 4 connectors and 1 IC. It belongs with the lEDs and displays boards and the ESP8266 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Barrel_Jack_MountingPin | Connector_BarrelJack:BarrelJack_Horizontal | J4 |
| 1 | DHT11 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J3 |
| 1 | Display | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1Right | J2 |
| 1 | Moisture Sensor | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical_SMD_Pin1Right | J1 |
| 1 | WEMOS_D1_mini | RF_Module:WEMOS_D1_mini_light | U2 |

mitchins/ESP-Aquarium-Water-Sensor
A simple water flow and quality sensor for aquariums based on ESP controller


jnissen/CC101
ESP MCU with CC1101 868 MHz Wireless Funk Modul Transciever


rwlloyd/stupid-solar-thing
Solar powered Wifi Sensor Based on ESP8266 microcontroller

nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

bitfixer/bf-romulator
Romulator - RAM/ROM replacement and debug for 6502 CPU systems

alcar21/WemosEM
Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)
It measures 52.3 × 52.7 mm and has 2 copper layers, 1.6 mm thick.
5 parts, built around the WEMOS D1 MINI and DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the vineethjkatti-tech/iplanter repository on GitHub, at the commit this page was made from: the board is KICAD/iplanter.kicad_pcb and its schematic KICAD/iplanter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask vineethjkatti-tech before reusing the design.