Skip to the content
2 layers82.4 × 92.3 mmOhmmeter, the printed circuit board in 3D

realtime ohm meter - shows value and the related E24 value in half a second

Size
82.4 × 92.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
37
Nets
41
Pads
143
Tracks, vias
446, 73
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
6 Oct 2020
Updated
9 Oct 2020

Overview

Ohmmeter is an open-source printed circuit board by jlegen, from the jlegen/Ohmmeter-Zabex repository on GitHub. It is a 2-layer board of 82.4 × 92.3 mm with 37 parts on 41 nets, routed with 446 tracks and 73 vias.

It is built around the ATMEGA88PA-MU and TP4056. Its parts include 14 resistors, 6 capacitors, 4 connectors, 3 ICs and 2 inductors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

Ohmmeter (Zabex)

realtime ohm meter - shows value and the related E24 value in half a second (or less)

Maybe you always have a lot of loose resistors lying around after your breadboard experiments, because sorting them back into the compartments is annoying and awkward. Then this thing is for you...

ohm meter in action

Parts

37
QtyValueFootprintReferences
4100nFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC1, C2, C3, C4
4MountingHoleMountingHole:MountingHole_3mm_PadH1, H2, H3, H4
347kResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR4, R9, R10
3DUTConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1, J2, J4
21MResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR1, R2
2220Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR7, R13
1100Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR8
110kResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR14
110uFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC5
110uHInductor_SMD:L_6.3x6.3_H3L2
118650Battery:BatteryHolder_MPD_BH-18650-PC2BT1
11kResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR6
120kPotentiometer_THT:Potentiometer_Bourns_3296W_VerticalRV1
122kResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR12
1330kResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR3
14u7Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC6
168kResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR11
16k8Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR5
18u2Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolderL1
1ATMEGA88PA-MUPackage_QFP:TQFP-32_7x7mm_P0.8mmU1
1ISPConnector_IDC:IDC-Header_2x05_P2.54mm_VerticalJ3
1LCD0802JLegs:LCD0802DS1
1MCP1640BCHTO_SOT_Packages_SMD:SOT-23-6U2
1SW_PushJLegs:B3F-4000SW1
1TP4056JLegs:TP4056U3

Similar boards

  • 2 layers80 × 129.1 mmSmart Plant, the printed circuit board in 3D

    Smart Plant

    JGAguado/Smart_Plant

    The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…

    75 parts303
  • 2 layers129.5 × 50.8 mmLilka, the printed circuit board in 3D

    Lilka

    lilka-dev/lilka

    Схема та документація ігрової консолі Lilka

    39 parts234GPL-2.0
  • 2 layers110 × 115 mmEsp32 keyboard v0.1, the printed circuit board in 3D

    Esp32 keyboard v0.1

    hhuysqt/esp32s3-keyboard

    USB/BLE keyboard driver based on ESP32S3-WROOM-1

    230 parts168GPL-3.0
  • 2 layers192.4 × 50 mmOmote, the printed circuit board in 3D

    Omote

    OMOTE-Community/OMOTE-Hardware

    Open Source Remote - Hardware

    187 parts157GPL-3.0
  • 2 layers316 × 119 mmTeensy Grovebox, the printed circuit board in 3D

    Teensy Grovebox

    jerry20091103/Teensy_Grovebox

    A portable synth and music multi-tool made with Teensy 4.1

    142 parts150MIT
  • 4 layers43 × 49 mmEsppdp, the printed circuit board in 3D

    Esppdp

    Spritetm/esppdp

    ESP32-based PDP11 simulator, based onSimH

    55 parts141
  • 2 layersCharger stepup, the printed circuit board in 3D

    Charger stepup

    Aplyard/Oled-Clicker

    Clicker Counter for Arduino Nano

    19 parts117BSD-3-Clause
  • 6 layers64.8 × 69.9 mmEzDV, the printed circuit board in 3D

    EzDV

    tmiw/ezDV

    A FreeDV device based on the ESP32.

    130 parts114

Questions

How big is the Ohmmeter PCB?

It measures 82.4 × 92.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ohmmeter use?

37 parts, built around the ATMEGA88PA-MU and TP4056. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ohmmeter KiCad files?

From the jlegen/Ohmmeter-Zabex repository on GitHub, at the commit this page was made from: the board is pcb/ohmmeter/ohmmeter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ohmmeter design in my own project?

Its repository states no licence, so its author keeps all rights: ask jlegen before reusing the design.