
AC DC Wandler
MoElashmawi/Flyback-AC-DC-Converter
Flyback AC-DC Converter (230V AC to 12V DC) — Full SMPS design using VIPer22A PWM Controller. Schematic, PCB layout & 3D render in KiCad.

The Schematic and PCB layout for the bikelights on my commuter bike.
BikeLights is an open-source printed circuit board by jkasari, from the jkasari/bikeLightsPCB repository on GitHub. It is a 2-layer board of 71.1 × 64.1 mm with 24 parts on 40 nets, routed with 120 tracks and 8 vias.
It is built around the IRF9540NS, KBP206 and RFP30N06LE-VB. Its parts include 11 resistors, 5 connectors, 4 transistors, 2 diodes and 1 capacitor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2, R5, R7, R11 |
| 2 | 100k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1, R6 |
| 2 | 50k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R3, R10 |
| 2 | P2N2222A | eec:ON_Semi-CASE_2911-0-0-0 | Q2, Q4 |
| 1 | 1000uf 25v | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R4 |
| 1 | 5k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R9 |
| 1 | Arduino_Nano_Every | Module:Arduino_Nano | A1 |
| 1 | Battery | solder_pads:solder_holes_medium | J1 |
| 1 | DIODE | Diode_THT:D_A-405_P10.16mm_Horizontal | D1 |
| 1 | Front Light - + | solder_pads:solder_holes_medium | J3 |
| 1 | Hub Power In | solder_pads:solder_holes_medium | J5 |
| 1 | IRF9540N | mosfets:mosfet_p_type_RFP30N6LE | Q1 |
| 1 | KBP206 | KBC206:SIP380W81P386L1470H1270Q4 | D2 |
| 1 | Light Sensor | solder_pads:solder_holes_medium | J2 |
| 1 | R | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R8 |
| 1 | RFP30N06LE | mosfets:mosfet_p_type_RFP30N6LE | Q3 |
| 1 | Rear Lights - + | solder_pads:solder_holes_medium | J4 |

MoElashmawi/Flyback-AC-DC-Converter
Flyback AC-DC Converter (230V AC to 12V DC) — Full SMPS design using VIPer22A PWM Controller. Schematic, PCB layout & 3D render in KiCad.

ctrl-z3d/pcb-designs
A personal archive of PCB projects I've designed and built along the way. Schematics, board layouts, manufacturing files, and notes.



ortlof/magnet-selfbondage
1x LILYGO TTGO T1 ESP32 1x Keeppower 18650 3400mAh (Protected) 1x 1A Micro USB 18650 https://www.amazon.de/TECNOIOT-Lithium-Battery-Charging-Charger/dp/B07T52KGDT 1x MT3608 DC-DC Netzteil 1x MOSFET N-CH IRL1404ZPBF-ND…

gongminmin/AtmosphericWaterGenerator
An open source design of an atmospheric water generator


SimonDaniel605/Hydrogel-3D-Printer
Development of a custom hydrogel 3D printer for tissue engineering and research applications for Stellenbosch University.
It measures 71.1 × 64.1 mm and has 2 copper layers, 1.6 mm thick.
24 parts, built around the IRF9540NS, KBP206 and RFP30N06LE-VB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jkasari/bikeLightsPCB repository on GitHub, at the commit this page was made from: the board is bikeLights.kicad_pcb and its schematic bikeLights.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jkasari before reusing the design.