Skip to the content
2 layers101 × 73 mmPcb hotplate, the printed circuit board in 3D

A hotplate for soldering SMD to your pcb's

Size
101 × 73 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
25
Pads
75
Tracks, vias
167, 9
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
19 Jun 2025
Updated
27 Jun 2025

Overview

Pcb hotplate is an open-source printed circuit board by aaravs-s, from the aaravs-s/pcb_hotplate repository on GitHub. It is a 2-layer board of 101 × 73 mm with 17 parts on 25 nets, routed with 167 tracks and 9 vias.

It is built around the RFP30N06LE-VB. Its parts include 4 resistors, 2 ICs, 2 diodes, 2 switches and 1 transistor. It belongs with the RP2040 boards of this library.

Main components

1

README

README.md

pcb_hotplate

A hotplate for soldering SMD to your pcb's Most commercial hotplates are ethier too small, too expensive or dont support reflow profiles. My hotplate aims to help with those problems by having a heating area of 400mm by 100mm, and a reflow profile system which comes with tempreture tracking and adaptavily changing the tempreture based on that to match the heating profile. The entire system can be built for under $150

I made this project to learn more about how exactly does generating heat work and to better understand the work that goes into SMD soldering. I made this mainly because another project of mine requires SMD soldering so I thought it would be better to make my own hotplate than to just buy one from online. image [Image blocked: Uploading image.png…]

Screenshot 2025-06-27 000242 Screenshot 2025-06-27 002055 Screenshot 2025-06-27 002433 Screenshot 2025-06-25 002943 image TOTAL: $106 CSV IN REPO

Parts

17
QtyValueFootprintReferences
3RResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR1, R3, R4
2Fan_4pinConnector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_VerticalM1, M2
2LEDLED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mmD1, D2
2SW_Push_Open_DualButton_Switch_THT:SW_PUSH-12mmSW1, SW2
1HeaterTestPoint:TestPoint_Bridge_Pitch7.62mm_Drill1.3mmR2
1LOGOLOGOG***
1Main Power sourceBattery:BatteryClip_Keystone_54_D16-19mmBT1
1RFP30N06LERFP30N06LE:TRANS_RFP30N06LEQ1
1Thermistor_NTCTestPoint:TestPoint_Bridge_Pitch7.62mm_Drill1.3mmTH1
1XIAO-RP2040-DIPxiao:XIAO-RP2040-DIPU1
1~buck-converter:MP2303U3
1~THT_screen:THT_round 1.28 SCREENTFT_DISPLAY2

Similar boards

  • 2 layers33 × 25 mmSM Magnet, the printed circuit board in 3D

    SM Magnet

    ortlof/magnet-selfbondage

    1x LILYGO TTGO T1 ESP32 1x Keeppower 18650 3400mAh (Protected) 1x 1A Micro USB 18650 https://www.amazon.de/TECNOIOT-Lithium-Battery-Charging-Charger/dp/B07T52KGDT 1x MT3608 DC-DC Netzteil 1x MOSFET N-CH IRL1404ZPBF-ND…

    7 parts7GPL-3.0
  • 2 layers47 × 45.7 mmAWG, the printed circuit board in 3D

    AWG

    gongminmin/AtmosphericWaterGenerator

    An open source design of an atmospheric water generator

    24 parts2MIT
  • 2 layers71.1 × 64.1 mmBikeLights, the printed circuit board in 3D

    BikeLights

    jkasari/bikeLightsPCB

    The Schematic and PCB layout for the bikelights on my commuter bike.

    24 parts
  • 2 layers76.2 × 106.7 mmSFS NGENS V1.1, the printed circuit board in 3D

    SFS NGENS V1.1

    NextGen-Environmental-Sensor-Lab/NGENS_SapFlowSensor

    NGENS SAP FLOW SENSOR

    27 parts
  • 2 layers150 × 120 mmHydrogelBioprinter, the printed circuit board in 3D

    HydrogelBioprinter

    SimonDaniel605/Hydrogel-3D-Printer

    Development of a custom hydrogel 3D printer for tissue engineering and research applications for Stellenbosch University.

    174 partsMIT
  • 2 layers101 × 61.6 mmHeater control pcb, the printed circuit board in 3D

    Heater control pcb

    TheCodeSharman/Enclosure

    Custom enclosure frame pieces

    28 partsAGPL-3.0
  • 2 layers91.5 × 100 mmLights pcb, the printed circuit board in 3D

    Lights pcb

    QuinnFreedman/modular

    A collection of free & open source DIY synthesizer module designs for Eurorack

    59 parts116
  • 2 layers76.2 × 61 mmTapeshnik proto, the printed circuit board in 3D

    Tapeshnik proto

    svofski/tapeshnik

    compact cassette data drive

    55 parts14

Questions

How big is the Pcb hotplate PCB?

It measures 101 × 73 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pcb hotplate use?

17 parts, built around the RFP30N06LE-VB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pcb hotplate KiCad files?

From the aaravs-s/pcb_hotplate repository on GitHub, at the commit this page was made from: the board is PCB/pcb_hotplate.kicad_pcb and its schematic PCB/hotsheet.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pcb hotplate design in my own project?

Its repository states no licence, so its author keeps all rights: ask aaravs-s before reusing the design.