2 layers55.1 × 54.9 mm
2 layers69.1 × 126.1 mm
- Size
- 69.1 × 126.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 49
- Pads
- 180
- Tracks, vias
- 240, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 22 Apr 2015
- Updated
- 15 Aug 2016
Overview
ANDON v2 is an open-source printed circuit board by jjyothilinga, from the jjyothilinga/PCB_AndonXbeeTerminal repository on GitHub. It is a 2-layer board of 69.1 × 126.1 mm with 41 parts on 49 nets, routed with 240 tracks and 0 vias.
It is built around the PIC18F4520-I/P, ULN2003A and TIP127. Its parts include 13 resistors, 6 diodes, 5 connectors, 4 capacitors and 4 transistors. It belongs with the PIC boards of this library.
Main components
3
PIC18F4520-I/P
PDIP-40-40℃~+85℃ 1.5KB 10bit 256Byte 32KB 36 4.2V~5.5V 40MHz 8 Bit Built-in FLASH PIC PDIP-40 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
ULN2003A
SOP-16-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 50V Seven channels SOP-16 Darlington Transistor Arrays ROHSUMWDarlington Transistor Arrays
TIP127
TO-2201000 100V 2.5V 200uA 2W 4V@5A,20mA 5A 5V PNP TO-220 Darlington Transistors ROHSSTMicroelectronicsDarlington Transistors
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1pin | , , , | |
| 4 | 2.2K | Ideonics_R | R2, R3, R4, R5 |
| 4 | 470 | R4 | R14, R15, R16, R17 |
| 4 | TIP127 | Ideonics_TIP127 | Q1, Q2, Q3, Q4 |
| 2 | 10uF/16V | C1V5 | C2, C3 |
| 2 | 1K | Ideonics_R | R9, R10 |
| 2 | LED | LED-5MM | D2, D3 |
| 1 | 4PIN_TB | ||
| 1 | 0 | R4 | R13 |
| 1 | 0.1uF | C1 | C1 |
| 1 | 1M | Ideonics_R | R11 |
| 1 | 1uF/15V | Ideonics_Electrolytic_CV5 | C11 |
| 1 | 4.7K | R4 | R18 |
| 1 | CONN_4 | Ideonics_RMC_4Pin | P8 |
| 1 | CONN_5 | Ideonics_COMBICON_5 | P4 |
| 1 | CONN_5X2 | he10-10d | P15 |
| 1 | CONN_8 | Ideonics_RMC_8 | P5 |
| 1 | LED_PWR_3.3V | LED-5MM | D4 |
| 1 | LED_RF_ASIND | LED-5MM | D1 |
| 1 | LED_RF_RX | LED-5MM | D5 |
| 1 | LED_RX_TX | LED-5MM | D6 |
| 1 | PIC18F4520 | DIP-40__600 | U3 |
| 1 | PRG_CONN | SIL-5 | P2 |
| 1 | SW_PUSH | Ideonics_Micro_Switch | SW1 |
| 1 | ULN2003A | Idenoics_ULN2003 | U1 |
| 1 | XBEE | XBee-pro | U2 |
Similar boards
- 2 layers97 × 69 mm
- 2 layers119.7 × 79.1 mm
- 2 layers271.5 × 138.3 mm
- 2 layers100 × 80 mm
- 2 layers138 × 77 mm
- 2 layers82.5 × 63.5 mm
Dashboard
RidhaBouyahi/Motor-Control-And-Dashboard-PCB
This Dashboard PCB is developed to get data (position,temperature...) from sensors, control actuators and Dc Motor direction and speed control using PWM .
58 parts1 - 2 layers29 × 14.7 mm
Questions
How big is the ANDON v2 PCB?
It measures 69.1 × 126.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ANDON v2 use?
41 parts, built around the PIC18F4520-I/P, ULN2003A and TIP127. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ANDON v2 KiCad files?
From the jjyothilinga/PCB_AndonXbeeTerminal repository on GitHub, at the commit this page was made from: the board is ANDON_Terminal_DL_v2/ANDON_v2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ANDON v2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask jjyothilinga before reusing the design.