

7seg 2digit 2inch
- Size
- 119.7 × 79.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 45
- Pads
- 144
- Tracks, vias
- 248, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 30 May 2015
- Updated
- 30 May 2015
Overview
7seg 2digit 2inch is an open-source printed circuit board by jjyothilinga, from the jjyothilinga/PCB_7seg_2digit_2inch repository on GitHub. It is a 2-layer board of 119.7 × 79.1 mm with 33 parts on 45 nets, routed with 248 tracks and 0 vias.
It is built around the ULN2003A, ULN2803A and TIP127. Its parts include 11 resistors, 7 capacitors, 4 connectors, 2 ICs and 2 transistors.
Main components
3ULN2003A
SOP-16-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 50V Seven channels SOP-16 Darlington Transistor Arrays ROHSUMWDarlington Transistor ArraysULN2803A
SOP-18-300mil-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 500mA 50V 8 SOP-18-300mil Darlington Transistor Arrays ROHSUMWDarlington Transistor ArraysTIP127
TO-2201000 100V 2.5V 200uA 2W 4V@5A,20mA 5A 5V PNP TO-220 Darlington Transistors ROHSSTMicroelectronicsDarlington Transistors
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | R | Ideonics_R | R1, R2, R3, R4, R5, R6, R7, R8 |
| 6 | C*** | C2 | C2, C2, C2, C2, C2, C2 |
| 4 | 1pin | , , , | |
| 2 | 2.2K | Ideonics_R | R9, R10 |
| 2 | 7SEGMENTS | 2INCH_DISPLAY_REVERSE_PINS | AFF1, AFF2 |
| 2 | CONN_2 | Ideonics_RMC_2 | P2, P4 |
| 2 | TIP127 | TO220_VERT | Q1, Q2 |
| 1 | C | Ideonics_Ceramic | C104 |
| 1 | CONN_2 | R4 | 0 ohm |
| 1 | DIL16 | pin_array_8x2 | P3 |
| 1 | FRC20 | HE10_20D | P1 |
| 1 | JMP_E | R4 | R11 |
| 1 | ULN2003A | DIP-16__300 | U1 |
| 1 | ULN2803A | DIP-18__300 | U2 |
Similar boards
- 2 layers271.5 × 138.3 mm

- 2 layers100 × 80 mm

- 2 layers69.1 × 126.1 mm

- 2 layers108 × 56.1 mm

- 2 layers211.6 × 76.4 mm

- 2 layers138 × 77 mm

- 2 layers82.5 × 63.5 mm

Dashboard
RidhaBouyahi/Motor-Control-And-Dashboard-PCB
This Dashboard PCB is developed to get data (position,temperature...) from sensors, control actuators and Dc Motor direction and speed control using PWM .
58 parts1 - 2 layers29 × 14.7 mm

Questions
How big is the 7seg 2digit 2inch PCB?
It measures 119.7 × 79.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 7seg 2digit 2inch use?
33 parts, built around the ULN2003A, ULN2803A and TIP127. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 7seg 2digit 2inch KiCad files?
From the jjyothilinga/PCB_7seg_2digit_2inch repository on GitHub, at the commit this page was made from: the board is 7seg_2digit_2inch/7seg_2digit_2inch.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 7seg 2digit 2inch design in my own project?
Its repository states no licence, so its author keeps all rights: ask jjyothilinga before reusing the design.