

12W Audio amplifier
An audio amplifier of power gain 12W
- Size
- 29 × 14.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 17
- Pads
- 63
- Tracks, vias
- 106, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 5 Oct 2022
- Updated
- 25 Oct 2022
Overview
12W Audio amplifier is an open-source printed circuit board by AmitBarman99, from the AmitBarman99/12W-Audio-amplifier repository on GitHub. It is a 2-layer board of 29 × 14.7 mm with 18 parts on 17 nets, routed with 106 tracks and 0 vias.
It is built around the LF351D, TIP122 and TIP127. Its parts include 8 resistors, 4 capacitors, 2 transistors, 1 IC and 1 diode. It belongs with the audio and music boards of this library.
Main components
3LF351D
SO-80℃~+70℃ 1 10mV 10uV/℃ 15nV/√Hz@1kHz 16V/us 200pA 3.4mA 4MHz 5pA 60mA 6V~32V 86dB Short-Circuit Protection、Built-in compensation、Latch-up suppression SO-8 FET Input Amplifiers ROHSSTMicroelectronicsFET Input AmplifiersTIP122
TO-2201000 100V 2.5V 200uA 5A 5V 65W NPN TO-220 Darlington Transistors ROHSSTMicroelectronicsDarlington TransistorsTIP127
TO-2201000 100V 2.5V 200uA 2W 4V@5A,20mA 5A 5V PNP TO-220 Darlington Transistors ROHSSTMicroelectronicsDarlington Transistors
README
README.mdParts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 180R | Resistor_SMD:R_0201_0603Metric | R4, R5 |
| 2 | 4.7k | Resistor_SMD:R_0201_0603Metric | R1, R3 |
| 1 | 0.1uF | Capacitor_SMD:CP_Elec_3x5.3 | C4 |
| 1 | 0.22uF | Capacitor_SMD:CP_Elec_3x5.3 | C2 |
| 1 | 10k | Potentiometer_SMD:Potentiometer_ACP_CA6-VSMD_Vertical | RV1 |
| 1 | 10pF | Capacitor_SMD:CP_Elec_3x5.3 | C1 |
| 1 | 2.2k | Resistor_SMD:R_0201_0603Metric | R7 |
| 1 | 4.7R | Resistor_SMD:R_0201_0603Metric | R8 |
| 1 | 4.7nF | Capacitor_SMD:CP_Elec_3x5.3 | C3 |
| 1 | 47R | Resistor_SMD:R_0201_0603Metric | R6 |
| 1 | 47k | Resistor_SMD:R_0201_0603Metric | R2 |
| 1 | LED | LED_SMD:LED_0201_0603Metric | D1 |
| 1 | LF351D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Speaker | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | LS1 |
| 1 | TIP122 | Package_TO_SOT_THT:TO-220-3_Vertical | Q2 |
| 1 | TIP127 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
Similar boards
- 2 layers56.6 × 57.7 mm

- 2 layers138 × 77 mm

- 2 layers82.5 × 63.5 mm

Dashboard
RidhaBouyahi/Motor-Control-And-Dashboard-PCB
This Dashboard PCB is developed to get data (position,temperature...) from sensors, control actuators and Dc Motor direction and speed control using PWM .
58 parts1 - 2 layers117.1 × 84.6 mm

- 4 layers96.5 × 62.2 mm

- 2 layers100 × 50 mm

Amplificador
ThiagoAlterino/Electronica_Aplicada_2
Repositorio para la materia electronica aplicada 2 UTN FRBA
39 parts - 2 layers50 × 50 mm

- 2 layers122.2 × 99.6 mm

Questions
How big is the 12W Audio amplifier PCB?
It measures 29 × 14.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 12W Audio amplifier use?
18 parts, built around the LF351D, TIP122 and TIP127. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 12W Audio amplifier KiCad files?
From the AmitBarman99/12W-Audio-amplifier repository on GitHub, at the commit this page was made from: the board is 12W audio amplifier.kicad_pcb and its schematic 12W audio amplifier.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 12W Audio amplifier design in my own project?
Its repository states no licence, so its author keeps all rights: ask AmitBarman99 before reusing the design.
