Skip to the content
2 layers122.2 × 99.6 mmDatalogger, the printed circuit board in 3D
Size
122.2 × 99.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
80
Nets
133
Pads
299
Tracks, vias
386, 23
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
26 Mar 2024
Updated
19 May 2024

Overview

Datalogger is an open-source printed circuit board by dhruvp05, from the dhruvp05/Datalogger-PCB repository on GitHub. It is a 2-layer board of 122.2 × 99.6 mm with 80 parts on 133 nets, routed with 386 tracks and 23 vias.

It is built around the ATMEGA2560-16AU, LM2596T-5.0 and AMS1117-3.3, with the CNY74-4H, BC847 and BC547 among its other parts. Its parts include 28 resistors, 16 diodes, 11 capacitors, 10 connectors and 7 ICs. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

8

README

README.md

Datalogger PCB

Root

Root

Power Supply

Power Supply

Microcontroller

Microcontroller

Relay Motor

Relay Motor

Digital I/O

Digital I/O

Layout

Layout

3D View

3D View

Parts

80
QtyValueFootprintReferences
141kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20
9~KiCad:DIOM8059X256ND4, D5, D6, D7, D8, D9, D10, D11, D12
8100kResistor_SMD:R_1206_3216MetricR21, R22, R23, R24, R25, R26, R27, R28
6ScrewConnector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_HorizontalJ4, J5, J6, J7, J9, J10
4104Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC8, C9, C10, C11
410kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R5, R6
45VDiode_SMD:D_SOD-323_HandSolderingD13, D14, D15, D16
310uFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC1, C3, C5
3PC817Package_DIP:DIP-4_W7.62mmU4, U5, U6
222pFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC6, C7
2BC847Package_TO_SOT_SMD:SOT-23Q2, Q3
1100ohmResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4
116MHzCrystal:Crystal_HC49-4H_VerticalY1
1220uFCapacitor_SMD:CP_Elec_10x10C4
1470uFCapacitor_THT:CP_Radial_D10.0mm_P2.50mmC2
147kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3
168uHInductor_SMD:L_10.4x10.4_H4.8L1
17.5VDiode_SMD:D_0402_1005Metric_Pad0.77x0.64mm_HandSolderD2
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U1
1ATmega2560-16APackage_QFP:TQFP-100_14x14mm_P0.5mmU3
1AVR-ISP-6Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ2
1BC547Package_TO_SOT_SMD:SOT-23-3Q1
1CNY74-4HCNY74-4H:DIL16U7
1Conn_01x04_SocketConnector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_4-G-5,08_1x04_P5.08mm_HorizontalJ8
1From MainsConnector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_2-G-5,08_1x02_P5.08mm_VerticalJ1
1LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD3
1LM2596T-5Package_TO_SOT_THT:TO-220F-5_VerticalU2
1PPTCFuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolderF1
1SMBJ12CASMBJ12CA:DIOM4336X265ND1
1TIP127Package_TO_SOT_THT:TO-220-3_VerticalQ4
1USB_BConnector_USB:USB_B_OST_USB-B1HSxx_HorizontalJ3
1~Button_Switch_THT:SW_PUSH_6mmSW1

Similar boards

  • 2 layers137 × 89 mmOVHD Mainboard, the printed circuit board in 3D

    OVHD Mainboard

    stefanofinetti/MF_OverHead_Panel

    Complete project for the Airbus A319/320/321/330 OverHead Panel

    127 parts5GPL-3.0
  • 2 layers123.8 × 99.7 mmThc, the printed circuit board in 3D

    Thc

    festlv/thc

    An automatic torch height controller

    75 parts7
  • 2 layersCV in axoloti, the printed circuit board in 3D

    CV in axoloti

    kaosbeat/axo-patches

    code repo for my axoloti

    22 parts4
  • 2 layers161.2 × 117.9 mmControl de panel, the printed circuit board in 3D

    Control de panel

    martincrespo77/Paneles-solares-pcb-esp32

    Seguidor solar de 2 ejes con ESP32: firmware PlatformIO y PCB en KiCad

    35 parts
  • 2 layers119.4 × 33 mmKiCadPcb, the printed circuit board in 3D

    KiCadPcb

    Warre04/Smart_DeLonghi_ECAM13.123.B

    This repository documents the process of upgrading my De'Longhi machine with smart features. The electronic system has been reverse-engineered to integrate an ESP8266, which connects to Home Assistant using ESPHome.

    13 partsMIT
  • 2 layers65 × 62 mmRegulator, the printed circuit board in 3D

    Regulator

    indoor-industry/64-73-Mustang-Solid-State-Voltage-Regulator-Reverse-Engineering

    A reverse engineering of the Darlington transistor based solid-state replacements for old Mustangs voltage regulators that are commonly sold as spares.

    30 parts
  • 2 layers100 × 50 mmAmplificador, the printed circuit board in 3D

    Amplificador

    ThiagoAlterino/Electronica_Aplicada_2

    Repositorio para la materia electronica aplicada 2 UTN FRBA

    39 parts
  • 2 layers96.5 × 81.3 mmIncubator, the printed circuit board in 3D

    Incubator

    Socketto/Incubator_ESP32

    Wifi incubator with ESP32-wroom

    53 parts

Questions

How big is the Datalogger PCB?

It measures 122.2 × 99.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Datalogger use?

80 parts, built around the ATMEGA2560-16AU, LM2596T-5.0, AMS1117-3.3 and CNY74-4H. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Datalogger KiCad files?

From the dhruvp05/Datalogger-PCB repository on GitHub, at the commit this page was made from: the board is Datalogger.kicad_pcb and its schematic 4-20mA_sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Datalogger design in my own project?

Its repository states no licence, so its author keeps all rights: ask dhruvp05 before reusing the design.