

Next4529
Replacement for MC14529
- Size
- 10.7 × 20.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 34
- Pads
- 98
- Tracks, vias
- 280, 49
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 16 Nov 2025
- Updated
- 20 Nov 2025
Overview
Next4529 is an open-source printed circuit board by jimbro1000, from the jimbro1000/NX4529 repository on GitHub. It is a 4-layer board of 10.7 × 20.8 mm with 13 parts on 34 nets, routed with 280 tracks and 49 vias.
It is built around the SLG46824V and 74LVC1G3157. Its parts include 9 ICs and 2 capacitors.
Main components
2README
README.mdMC14529 Replacement
This repository contains the design for a CPLD based replacement for the long obsolete MC14529 analog multiplexer. The design is intended only to act as a substitute in the Dragon 32/64 computers.

Limitations
The original MC14529 can act a 8:1 multiplexer which ties the two output pins together. It can also place the two output pins in a high impedance state.
In both cases these configurations are limited in this design to suit the specific use-case for the Dragon.
- The high impedance state is not implemented
- The two output pins are only correct when the X inputs are selected, if the Y inputs are selected the result will still be two independant outputs
Design
The design is based around the Renesas SLG46824 CPLD. This is a 3mm x 2mm device (about the size of a 1/4W leaded resistor). The CPLD reproduces the truth table of the original device.
The actual multiplexing is performed by an array of LS74LVC1G3157 analog SPDT switches. These are available in very small packages allowing seven of them to be fitted in the available space.
The board design must retain the footprint of a DIP-16 device and provides the most significant design constraint.
License
This project is licensed under creative commons CC-BY-SA 4.0
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 74LVC1G3157 | Package_TO_SOT_SMD:Vishay_PowerPAK_SC70-6L_Dual | U1, U2, U3, U4, U5, U6, U7 |
| 2 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | TestPoint_Small | TestPoint:TestPoint_Pad_D1.0mm | scl1, sda1 |
| 1 | 14529 | Library:DIP-16_board | U9 |
| 1 | SLG46824V | Package_DFN_QFN:Renesas_UQFN-20_2x3mm_P0.4mm_LayoutBorder4x6y | U8 |
Similar boards
- 2 layers253 × 199.4 mm

- 4 layers180.9 × 110 mm

- 2 layers70.7 × 53.3 mm

- 4 layers82.8 × 53.3 mm

- 4 layers100 × 123 mm

Duet3 5+ Ethernet
Duet3D/Duet3-Mini5plus
This repository also contains information in the Mini 2+ : a two driver expansion board for the Duet 3 mini 5+
461 parts12 - 4 layers101.6 × 141.7 mm

- 2 layers70.6 × 53.3 mm

- 2 layers58.9 × 40.9 mm

GlitchBob LPC
parasyte/GlitchBob-LPC
Voltage glitching automation tool to break protection on NXP LPC microcontrollers.
12 parts4MIT
Questions
How big is the Next4529 PCB?
It measures 10.7 × 20.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Next4529 use?
13 parts, built around the SLG46824V and 74LVC1G3157. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Next4529 KiCad files?
From the jimbro1000/NX4529 repository on GitHub, at the commit this page was made from: the board is Next4529.kicad_pcb and its schematic Next4529.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Next4529 design in my own project?
Its repository states no licence, so its author keeps all rights: ask jimbro1000 before reusing the design.