

Jasmine
a lithium polymer battery charging neighbor
- Size
- 70.6 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 93
- Nets
- 157
- Pads
- 386
- Tracks, vias
- 700, 72
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 May 2019
- Updated
- 6 Dec 2021
Overview
Jasmine is an open-source printed circuit board by greatfet-hardware, from the greatfet-hardware/jasmine repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 70.6 × 53.3 mm with 93 parts on 157 nets, routed with 700 tracks and 72 vias.
It is built around the PCAL6416AHF, 74HC4051 and 74LVC1G3157, with the MIC5501-3.0YM5-TR among its other parts. Its parts include 41 resistors, 11 connectors, 8 diodes, 7 capacitors and 7 ICs. It belongs with the power boards of this library.
Main components
4PCAL6416AHF
HWQFN-24-40℃~+85℃ 1.65V~5.5V 16 1uA 2 25mA 400kHz I2C、SMBus Interrupt Output Push-Pull、Open-drain Reset function、Cascading and address extension、Built-in LED driver、IO level configurable HWQFN-24 I/O Expanders ROHSNXP SemiconductorsI/O Expanders74HC4051
SOP-16-40℃~+85℃ 1 170MHz 28ns 29ns 3V~9V 5ns 5pF 80Ω 8:1 SOP-16 Analog Switches, Multiplexers ROHSWuxi I-core ElecAnalog Switches, Multiplexers74LVC1G3157
UncategorisedDiodes IncorporatedMIC5501-3.0YM5-TR
SOT-23-5-40℃~+125℃@(Tj) 1 175uVrms 300mA 380mV@(300mA) 3V 5.5V 55uA 60dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdJasmine
a lithium polymer battery charging GreatFET neighbor
When operating a GreatFET under LiPo power from Jasmine, the voltage may drop under 3.3VDC.
The default charge rate for Jasmine is 15mA. The default can be reconfigured by populating R17 (FIXME).
Required KiCad dependency:
https://github.com/greatscottgadgets/gsg-kicad-lib
If you are using git, the preferred way to install gsg-kicad-lib is to use the submodule:
git submodule init && git submodule updateParts
93| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10k | gsg-modules:0603 | R3, R11, R13, R14, R15, R16, R23, R26, R29, R30, R38, R39 |
| 10 | TestPoint | gsg-modules:TESTPOINT-50MIL | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10 |
| 9 | 100k | gsg-modules:0603 | R27, R28, R31, R32, R33, R34, R35, R36, R37 |
| 6 | 330 | gsg-modules:0603 | R1, R7, R8, R9, R10, R12 |
| 6 | LED | gsg-modules:0603D | D3, D4, D5, D6, D7, D8 |
| 4 | MOUNTING_HOLE | gsg-modules:HOLE126MIL-COPPER | MH1, MH2, MH3, MH4 |
| 3 | 1uf | gsg-modules:0603 | C4, C5, C6 |
| 2 | 0 | gsg-modules:0603 | R2, R41 |
| 2 | 2k | gsg-modules:0603 | R6, R19 |
| 2 | 4.7 uF | gsg-modules:0603 | C1, C2 |
| 2 | 67k | gsg-modules:0603 | R18, R25 |
| 2 | 74HC4051 | gsg-modules:SOIC16 | U2, U3 |
| 2 | D | gsg-modules:SOD128 | D1, D2 |
| 2 | TEST_POINT | gsg-modules:HEADER-1x2 | J9, J10 |
| 1 | 0.1 | gsg-modules:0603 | R5 |
| 1 | 0.47 uF | gsg-modules:0603 | C7 |
| 1 | 2.5k | gsg-modules:0603 | R20 |
| 1 | 20k | gsg-modules:0603 | R4 |
| 1 | 25k | gsg-modules:0603 | R24 |
| 1 | 2PIN_BATT_CONN | gsg-modules:JST_PH_S2B-PH-SM4-TB_02x2.00mm_Angled | J5 |
| 1 | 3.33k | gsg-modules:0603 | R21 |
| 1 | 3.7_VDC | gsg-modules:TerminalBlock_4UCON_19963_02x3.5mm_Straight | J11 |
| 1 | 3.7_VDC | gsg-modules:HEADER-1x2 | J6 |
| 1 | 5k | gsg-modules:0603 | R22 |
| 1 | 74LVC1G3157 | gsg-modules:SOT363 | U5 |
| 1 | AAT4616IGV-1-T1 | TO_SOT_Packages_SMD:SOT-23-5_HandSoldering | U6 |
| 1 | BONUS_ROW | gsg-modules:HEADER-1x20 | J7 |
| 1 | C | gsg-modules:0603 | C3 |
| 1 | INPUT | gsg-modules:TerminalBlock_4UCON_19963_02x3.5mm_Straight | J8 |
| 1 | Jumper_2_Bridged | gsg-modules:0603-JUMPER | JP2 |
| 1 | Jumper_3_Open | gsg-modules:0603-JUMPER_3 | JP1 |
| 1 | LIPO_BATT_CONN | gsg-modules:JST_PH_S2B-PH-SM4-TB_02x2.00mm_Angled | J4 |
| 1 | LOGO | jasmine:yhetti | G*** |
| 1 | MCP73831T | TO_SOT_Packages_SMD:SOT-23-5 | U1 |
| 1 | MIC5501-3.0YM5 | TO_SOT_Packages_SMD:SOT-23-5 | U4 |
| 1 | NEIGHBOR1 | gsg-modules:HEADER-2x20 | J1 |
| 1 | NEIGHBOR2 | gsg-modules:HEADER-2x20 | J2 |
| 1 | PCAL6416A | Housings_SSOP:TSSOP-24_4.4x7.8mm_Pitch0.65mm | U7 |
| 1 | R | gsg-modules:0603 | R40 |
| 1 | R | gsg-modules:RESISTOR-AXIAL-2.3x6.0mm | R17 |
| 1 | SW_SPDT | gsg-modules:MHSS1105 | SW1 |
| 1 | SiT1533 | gsg-modules:SiT1533 | X1 |
| 1 | USB-MICRO-B-SHIELDED | gsg-modules:USB-MICROB-FCI-10103592-LONGPADS | J3 |
Similar boards
- 4 layers82.8 × 53.3 mm

- 2 layers70.6 × 53.3 mm

- 4 layers106 × 80 mm

Mainboard
PyroVision-ThermalCam/Mainboard
Mainboard for the PyroVision thermal camera.
152 parts11GPL-3.0 - 2 layers106 × 80 mm

Displayboard
PyroVision-ThermalCam/Displayboard
Displayboard for the PyroVision thermal camera.
27 parts4GPL-3.0 - 4 layers130 × 51 mm

- 4 layers184.3 × 131 mm

- 2 layers101.6 × 101.6 mm

- 2 layers104.4 × 15 mm

Questions
How big is the Jasmine PCB?
It measures 70.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Jasmine use?
93 parts, built around the PCAL6416AHF, 74HC4051, 74LVC1G3157 and MIC5501-3.0YM5-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Jasmine KiCad files?
From the greatfet-hardware/jasmine repository on GitHub, at the commit this page was made from: the board is jasmine.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Jasmine design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).