Skip to the content
4 layers56 × 62.4 mmC64-Dragon Remix KeyboardController, the printed circuit board in 3D

C64-Dragon Remix KeyboardController

jimbro1000/C64-Dragon-Remix-KeyboardController

Translation interface to allow a Dragon keyboard to operate a C64

Size
56 × 62.4 mm
Copper layers
4
Thickness
1.6 mm
Parts
10
Nets
71
Pads
163
Tracks, vias
281, 41
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
17 Oct 2025
Updated
17 Oct 2025

Overview

C64-Dragon Remix KeyboardController is an open-source printed circuit board by jimbro1000, from the jimbro1000/C64-Dragon-Remix-KeyboardController repository on GitHub. It is a 4-layer board of 56 × 62.4 mm with 10 parts on 71 nets, routed with 281 tracks and 41 vias.

It is built around the 74LS373SC and 74LS148P-E. Its parts include 4 ICs and 2 connectors. It belongs with the ESP32 and FPGA and CPLD boards of this library.

Main components

2

Parts

10
QtyValueFootprintReferences
2R_4x0402_ConvexPCM_Resistor_SMD_AKL:R_Array_Convex_4x0402RN1, RN2
174LS148Package_SO:SOIC-16_3.9x9.9mm_P1.27mmU4
174LS244Package_SO:SOIC-20W_7.5x12.8mm_P1.27mmU2
174LS373Package_SO:SOIC-20W_7.5x12.8mm_P1.27mmU1
1ADIY-ESP32eLibrary:ADIY-ESP32eMC1
1Conn_01x16Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_VerticalJ1
1GAL22v10Package_DIP:DIP-24_W7.62mmU3
1KEYBOARD_20PIN_MALEConnector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_VerticalCN1
1LOGOLibrary:DBM_logoG***

Similar boards

  • 2 layers177 × 140.7 mmSteve 68k, the printed circuit board in 3D

    Steve 68k

    stevegg/Steve-68k

    Single Board 68k Computer

    91 parts2
  • 4 layers236.8 × 240.9 mmDIY Video, the printed circuit board in 3D

    DIY Video

    jimbro1000/DIY-Video

    General purpose video system for 8-bit computers using 74LS logic

    315 parts1
  • 2 layers100 × 100 mmZ80PROC3, the printed circuit board in 3D

    Z80PROC3

    lynchaj/nhyodyne

    Modular Backplane Computer

    93 parts31
  • 2 layers235 × 160 mmProcessor.Z80, the printed circuit board in 3D

    Processor.Z80

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    136 parts15
  • 4 layers160 × 100 mmRosco m68k, the printed circuit board in 3D

    Rosco m68k

    rosco-m68k/rosco_m68k

    Design, documentation and software for the Really Old School Computer (M68K)

    140 parts200
  • 2 layers134.6 × 208.3 mmTs2, the printed circuit board in 3D

    Ts2

    jefftranter/68000

    Code related to the Motorola 68000 microprocessor.

    110 parts133
  • 6 layers243.8 × 243.8 mmRaven, the printed circuit board in 3D

    Raven

    agranlund/raven

    Homemade MC68060 + DSP56303 Atari-compatible computer. Hardware, firmware, and software stack

    331 parts87
  • 4 layers214 × 170 mm.C68, the printed circuit board in 3D

    .C68

    ProbablyNotArtyom/Blitz

    Blitz is a 68030 based homebrew computer I designed over the course of nearly 3 years, starting in late 2017.

    185 parts51GPL-2.0

Questions

How big is the C64-Dragon Remix KeyboardController PCB?

It measures 56 × 62.4 mm and has 4 copper layers, 1.6 mm thick.

What parts does the C64-Dragon Remix KeyboardController use?

10 parts, built around the 74LS373SC and 74LS148P-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the C64-Dragon Remix KeyboardController KiCad files?

From the jimbro1000/C64-Dragon-Remix-KeyboardController repository on GitHub, at the commit this page was made from: the board is C64-Dragon-Remix-KeyboardController.kicad_pcb and its schematic C64-Dragon-Remix-KeyboardController.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the C64-Dragon Remix KeyboardController design in my own project?

Its repository states no licence, so its author keeps all rights: ask jimbro1000 before reusing the design.