

DragonNTSC
Plug-in video board for Dragon 32 recreation
- Size
- 120.2 × 35.7 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 66
- Pads
- 159
- Tracks, vias
- 357, 24
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 31 May 2023
- Updated
- 23 Jan 2026
Overview
DragonNTSC is an open-source printed circuit board by jimbro1000, from the jimbro1000/DragonNTSC repository on GitHub. It is a 4-layer board of 120.2 × 35.7 mm with 29 parts on 66 nets, routed with 357 tracks and 24 vias.
It is built around the NE555P and 1N34A. Its parts include 10 resistors, 7 capacitors, 4 ICs, 3 transistors and 2 diodes.
Main components
2README
README.mdNTSC VIDEO BOARD FOR DRAGON 32 RECREATION Rev 3

To further improve video quality on the Dragon 32 this board completely isolates the video circuits from the rest of the Dragon by making it a plugin. This also means that only a single version of the Dragon rev 3 board is needed to provide a PAL or NTSC solution.
Progress
This is a complete first hack at the design, based on the reference design in the 6847 datasheet with supporting information from the MC1372 datasheet.
The generator and amplifier circuits are isolated and should be good for a clean video signal.
Note
Given most modern TVs work with NTSC and PAL, switching automatically, this slimline video board (compared to the PAL version of the board) should be a cheaper and more attractive option. The component count is much lower and the harder to find analogue multiplexer is not needed.
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | .022uF | Capacitor_THT:C_Disc_D8.0mm_W2.5mm_P5.00mm | C5, C6 |
| 1 | .001uF | Capacitor_THT:C_Rect_L4.0mm_W2.5mm_P2.50mm | C7 |
| 1 | 0.1uF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C3 |
| 1 | 100nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C4 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R10 |
| 1 | 1K | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 1N3064 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 1N34A | Diode_THT:D_A-405_P10.16mm_Horizontal | D2 |
| 1 | 1uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | 2.2K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R7 |
| 1 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q3 |
| 1 | 2N4401 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q2 |
| 1 | 2N4403 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1 |
| 1 | 360R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1 |
| 1 | 3K3 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R4 |
| 1 | 3K9 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R3 |
| 1 | 4.7K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R8 |
| 1 | 470R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R5 |
| 1 | 560R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R2 |
| 1 | 74LS273N | Package_DIP:DIP-20_W7.62mm | IC1 |
| 1 | 75R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R6 |
| 1 | 9.1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R9 |
| 1 | Board Interconnect Male | Connector_PinHeader_2.54mm:PinHeader_2x11_P2.54mm_Vertical | J2 |
| 1 | MC1372 | Package_DIP:DIP-14_W7.62mm | IC3 |
| 1 | MC6847 | Package_DIP:DIP-40_W15.24mm | IC2 |
| 1 | NE555P | Package_DIP:DIP-8_W7.62mm | IC4 |
| 1 | Video Output | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
Similar boards
- 2 layers199.4 × 100.1 mm

- 2 layers70 × 85 mm

- 4 layers87.6 × 84 mm

Flashover
Cherry-Blossom-Development/GreywireStudio
GreywireStudio - a combined software/hardware product
95 parts - 2 layers121.9 × 149.9 mm

Yellow fuzz dev
ersatzavian/yellow_fuzz
A bass fuzz for my good friend! Don't tell him, it's a surprise. Starting with a Boss MT-2 (I know, ew, don't tell anybody) because that's allegedly how Arion Salazar got most of his fuzz tone's on Third Eye Blind's…
165 parts - 2 layers180 × 62 mm

- 2 layers52.3 × 84.8 mm

- 2 layers50 × 48 mm

Diy distortion pedal
maui-i/diy-distortion-pedal
Beginner build guide for an MXR Distortion+ style guitar pedal: breadboard, perfboard and true-bypass footswitch
25 partsMIT - 2 layers57.5 × 84 mm

OD Peddler
maxaviar/Overdrive-Pedal-Project
This repository contains all of the documentation and whatnot for my overdrive pedal I'm creating. The goal of this project is to design a circuit for an analog overdrive pedal for my electric guitar, get a custom PCB…
71 partsMIT
Questions
How big is the DragonNTSC PCB?
It measures 120.2 × 35.7 mm and has 4 copper layers, 1.6 mm thick.
What parts does the DragonNTSC use?
29 parts, built around the NE555P and 1N34A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DragonNTSC KiCad files?
From the jimbro1000/DragonNTSC repository on GitHub, at the commit this page was made from: the board is DragonNTSC.kicad_pcb and its schematic DragonNTSC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DragonNTSC design in my own project?
Its repository states no licence, so its author keeps all rights: ask jimbro1000 before reusing the design.