2 layers150 × 100 mm
Greenpower
ImNoahDev/XENIQ-Race-Car-Telemetry-System
XENIQ – Derived from “Xen-” (foreign/remote) and “IQ” (intelligence)
91 parts
2 layers57.5 × 84 mm
OD Peddler
maxaviar/Overdrive-Pedal-ProjectThis repository contains all of the documentation and whatnot for my overdrive pedal I'm creating. The goal of this project is to design a circuit for an analog overdrive pedal for my electric guitar, get a custom PCB, and solder everything myself for a custom guitar pedal
- Size
- 57.5 × 84 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 71
- Nets
- 43
- Pads
- 174
- Tracks, vias
- 38, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 Sep 2025
- Updated
- 3 Jul 2026
Overview
OD Peddler is an open-source printed circuit board by maxaviar, from the maxaviar/Overdrive-Pedal-Project repository on GitHub, published under the MIT licence. It is a 2-layer board of 57.5 × 84 mm with 71 parts on 43 nets, routed with 38 tracks and 0 vias.
It is built around the TL072, 1N34A and ZVP2110A. Its parts include 25 resistors, 21 capacitors, 7 diodes, 5 transistors and 3 connectors. It belongs with the audio and music boards of this library.
Main components
3
TL072
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 10V/us 10mV 2 2.5nA 3MHz 85dB SOP-8 Operational Amplifier ROHSGcoreOperational Amplifier1N34A
DO-7DO-7 Diodes - General Purpose ROHSNTE ElectronicsDiodes - General Purpose
ZVP2110A
TO-92L-3-55℃~+150℃ 1 P-Channel 100V 100pF 10pF 230mA 3.5V 35pF 700mW 8Ω@10V P-Channel TO-92L-3 MOSFETs ROHSDiodes IncorporatedMOSFETs
Parts
71| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D5, D6 |
| 5 | 47n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C7, C12, C14, C15, C16 |
| 4 | 100k | Resistor_SMD:R_0805_2012Metric | R21, R22, R23, R24 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R4, R6, R9, R11 |
| 3 | 1Meg | Resistor_SMD:R_0805_2012Metric | R_load1, R5, R18 |
| 3 | 220p | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C19, C20, C21 |
| 2 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R25, R26 |
| 2 | 1M | Resistor_SMD:R_0805_2012Metric | R14, R15 |
| 2 | 1µ | Capacitor_THT:C_Disc_D7.5mm_W5.0mm_P7.50mm | C5, C11 |
| 2 | 22k | Resistor_SMD:R_0805_2012Metric | R13, R16 |
| 2 | 22n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C4, C13 |
| 2 | 2N5210 | Package_TO_SOT_THT:TO-92_Inline | Q4, Q5 |
| 2 | 2N5457 | Package_TO_SOT_THT:TO-92_Inline | Q2, Q3 |
| 2 | 33k | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | 470p | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C17, C18 |
| 2 | 4k7 | Resistor_SMD:R_0805_2012Metric | R7, R12 |
| 2 | 56k | Resistor_SMD:R_0805_2012Metric | R19, R20 |
| 2 | AudioJack2 | Connector_Audio:Jack_6.35mm_Neutrik_NRJ4HF-1_Horizontal | J1, J2 |
| 2 | TL072 | Package_DIP:DIP-8_W7.62mm | U1, U2 |
| 1 | 1.5k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R27 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric | R17 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 100n | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C9 |
| 1 | 10k Log (Level) | PCM_4ms_Potentiometer:Pot_16mm_NoDet_RV16AF-4A | VR3 |
| 1 | 10n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C10 |
| 1 | 1M Log (Drive) | PCM_4ms_Potentiometer:Pot_16mm_NoDet_RV16AF-4A | VR1 |
| 1 | 1N34A | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D4 |
| 1 | 20k Linear (Tone) | PCM_4ms_Potentiometer:Pot_16mm_NoDet_RV16AF-4A | VR2 |
| 1 | 2k2 | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 30p | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C6 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 470µ | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | 47µ | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 6k8 | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 6n8 | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C8 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J3 |
| 1 | LED | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | D7 |
| 1 | SPST | PCM_4ms_Switch:Switch_Toggle_SPDT_SubMini | SW1 |
| 1 | SW_Push | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW2 |
| 1 | ZVP2110A | Package_TO_SOT_THT:TO-92_Inline | Q1 |
Similar boards
- 4 layers87.6 × 84 mm
Flashover
Cherry-Blossom-Development/GreywireStudio
GreywireStudio - a combined software/hardware product
95 parts - 2 layers90.2 × 72.4 mm
- 2 layers199.4 × 100.1 mm
- 2 layers70 × 85 mm
- 4 layers120.2 × 35.7 mm
- 2 layers121.9 × 149.9 mm
Yellow fuzz dev
ersatzavian/yellow_fuzz
A bass fuzz for my good friend! Don't tell him, it's a surprise. Starting with a Boss MT-2 (I know, ew, don't tell anybody) because that's allegedly how Arion Salazar got most of his fuzz tone's on Third Eye Blind's…
165 parts - 2 layers180 × 62 mm
Questions
How big is the OD Peddler PCB?
It measures 57.5 × 84 mm and has 2 copper layers, 1.6 mm thick.
What parts does the OD Peddler use?
71 parts, built around the TL072, 1N34A and ZVP2110A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OD Peddler KiCad files?
From the maxaviar/Overdrive-Pedal-Project repository on GitHub, at the commit this page was made from: the board is hardware/OD_Peddler.kicad_pcb and its schematic hardware/OD_Peddler.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the OD Peddler design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).