2 layers236.7 × 149.7 mm
ControllinoA
jibonaronno/documentsA
It is required to change settings using SCLManager.exe when required for new setup.
265 parts4
2 layers354.5 × 132.5 mm
Panels001
jibonaronno/documentsA4It is required to change settings using SCLManager.exe when required for new setup.
- Size
- 354.5 × 132.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 308
- Nets
- 186
- Pads
- 674
- Tracks, vias
- 1,218, 60
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 10 Apr 2023
- Updated
- 7 Nov 2026
Overview
Panels001 is an open-source printed circuit board by jibonaronno, from the jibonaronno/documentsA repository on GitHub. It is a 2-layer board of 354.5 × 132.5 mm with 308 parts on 186 nets, routed with 1,218 tracks and 60 vias.
It is built around the INA219AID, B5PS-VH and MMBT2222A, with the SS14 among its other parts. Its parts include 48 resistors, 42 connectors, 30 diodes, 12 ICs and 6 transistors.
Main components
4
INA219AID
SOIC-8-40℃~+125℃ 0.1uV/℃ 0V~26V 1 10uV 120dB 20nA 3V~5.5V 700uA Bidirectional detection、Zero drift / auto-zero、Input filter、Power monitoring、Digital output interface ±26V SOIC-8 Current Sense Amplifiers ROHSTexas InstrumentsCurrent Sense Amplifiers
B5PS-VH
CONN-TH插件 Wire To Board Connector ROHSJSTWire To Board Connector
MMBT2222A
SOT-23-55℃~+150℃ 1 NPN 100 100nA 1V 300MHz 300mW 40V 600mA 6V NPN Standalone SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdPDA IEC-61850 References
- LU_102_A Backup
- LU_104_A Backup
- ClientProc executable with SA_Client.ini and YH.cid files Backup
- SclManager Backup
SA_Client.ini has following configs:
LocalIp=192.168.10.105
...
...
PATH=D:/develop/MZAutomation/SAProgram/ClientProc_2017_Dev_NoTimer_Minsu/ClientProc/61850_CFG/CFG/61850/SA_CFG
SAVE_PATH =D:/develop/MZAutomation/SAProgram/ClientProc_2017_Dev_NoTimer_Minsu/ClientProc/61850_CFG/LOG/61850
ENG_PATH =D:/develop/MZAutomation/SAProgram/ClientProc_2017_Dev_NoTimer_Minsu/ClientProc/61850_CFG/DB/ied_info_gw.csvThese configurations should be changed if machine or location is changed.
It is required to change settings using SCLManager.exe when required for new setup.
Confluence Pages From PDA ACQ Operation and calculation / Integration of various current values Copy of 차단기 동작 특성 페이지 https://jlee193.atlassian.net/wiki/spaces/PDA/pages/514129921/Copy+of
Bushing Documentation Page From PDA 부싱 누설 전류 페이지 https://jlee193.atlassian.net/wiki/spaces/PDA/pages/296812597
An Initial Concept of hardware pptx file downloaded in Confluence folder 종합예방진단시스템(20210625)_HW팀.pptx 하드웨어 구성 https://jlee193.atlassian.net/wiki/spaces/PDA/pages/154042616
Parts
308| Qty | Value | Footprint | References |
|---|---|---|---|
| 156 | NPTH | NPTH | KiKit_MB_10_1, KiKit_MB_10_2, KiKit_MB_10_3, KiKit_MB_10_4, KiKit_MB_11_1, KiKit_MB_11_2, KiKit_MB_11_3, KiKit_MB_11_4, KiKit_MB_12_1, KiKit_MB_12_2, KiKit_MB_12_3, KiKit_MB_12_4, KiKit_MB_13_1, KiKit_MB_13_2, KiKit_MB_13_3, KiKit_MB_13_4 +140 |
| 24 | 470E | Resistor_SMD:R_0603_1608Metric | R3, R3, R3, R3, R3, R3, R4, R4, R4, R4, R4, R4, R5, R5, R5, R5 +8 |
| 24 | LED | LED_THT:LED_D3.0mm | D1, D1, D1, D1, D1, D1, D2, D2, D2, D2, D2, D2, D3, D3, D3, D3 +8 |
| 12 | 4k7 | Resistor_SMD:R_0603_1608Metric | R7, R7, R7, R7, R7, R7, R8, R8, R8, R8, R8, R8 |
| 12 | B5PS-VH | footprints:CONN_B5PS-VH_JST | J2, J2, J2, J2, J2, J2, J3, J3, J3, J3, J3, J3 |
| 12 | Conn_01x07 | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J4, J4, J4, J4, J4, J4, J5, J5, J5, J5, J5, J5 |
| 8 | Fiducial | Fiducial | KiKit_FID_B_1, KiKit_FID_B_2, KiKit_FID_B_3, KiKit_FID_B_4, KiKit_FID_T_1, KiKit_FID_T_2, KiKit_FID_T_3, KiKit_FID_T_4 |
| 6 | 1K | Resistor_SMD:R_0603_1608Metric | R2, R2, R2, R2, R2, R2 |
| 6 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7, J7, J7, J7, J7, J7 |
| 6 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J6, J6, J6, J6, J6, J6 |
| 6 | DCJ200-10-A-XX-K_REVA | DCJ200-10-A-XX-K_REVA:GCT_DCJ200-10-A-XX-K_REVA | J1, J1, J1, J1, J1, J1 |
| 6 | FINDER-36.11 | Relay_THT:Relay_SPDT_Finder_36.11 | K2, K2, K2, K2, K2, K2 |
| 6 | INA219 | INA219:MODULE_INA219 | U2, U2, U2, U2, U2, U2 |
| 6 | MMBT2222A | Package_TO_SOT_SMD:SOT-23 | Q1, Q1, Q1, Q1, Q1, Q1 |
| 6 | R_Small | Resistor_SMD:R_0603_1608Metric | R1, R1, R1, R1, R1, R1 |
| 6 | SS14 | Diode_SMD:D_SMA | D6, D6, D6, D6, D6, D6 |
| 6 | YAAJ_DCDC_StepDown_LM2596 | KiCad:YAAJ_DCDC_StepDown_LM2596 | U3, U3, U3, U3, U3, U3 |
More from jibonaronno/documentsA
12- 2 layers237 × 132.5 mm
Panel
jibonaronno/documentsA
It is required to change settings using SCLManager.exe when required for new setup.
228 parts4 - 4 layers30 × 72 mm
ESP32-P4-DevKit Rev C
jibonaronno/documentsA
It is required to change settings using SCLManager.exe when required for new setup.
164 parts4 - 4 layers94 × 94 mm
Walter feels
jibonaronno/documentsA
It is required to change settings using SCLManager.exe when required for new setup.
153 parts4 - 2 layers
Cabinate
jibonaronno/documentsA
It is required to change settings using SCLManager.exe when required for new setup.
106 parts4 - 4 layers24.2 × 30.9 mm
Wearable
jibonaronno/documentsA
It is required to change settings using SCLManager.exe when required for new setup.
97 parts4 - 2 layers
TIP122Board
jibonaronno/documentsA
It is required to change settings using SCLManager.exe when required for new setup.
82 parts4 - 2 layers
Cabinate
jibonaronno/documentsA
It is required to change settings using SCLManager.exe when required for new setup.
75 parts4 - 2 layers122.5 × 174 mm
SnifferA
jibonaronno/documentsA
It is required to change settings using SCLManager.exe when required for new setup.
69 parts4 - 2 layers166 × 160.6 mm
SnifferA
jibonaronno/documentsA
It is required to change settings using SCLManager.exe when required for new setup.
68 parts4 - 4 layers26.1 × 32.5 mm
Reband
jibonaronno/documentsA
It is required to change settings using SCLManager.exe when required for new setup.
51 parts4 - 2 layers17.8 × 38.1 mm
STM32WB55Cx bb
jibonaronno/documentsA
It is required to change settings using SCLManager.exe when required for new setup.
33 parts4
Similar boards
- 2 layers45 × 59.5 mm
- 2 layers80 × 50 mm
Aegis imu carrier
krishharma/aegis-mtstdp
Integer STDP continual-learning core for FPGA (Python golden model + Verilog). Tiny-net co-sim. IMU/power carrier PCB. Tables are simulator results. Not an ASIC.
27 parts - 2 layers80 × 129.1 mm
Smart Plant
JGAguado/Smart_Plant
The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…
75 parts303 - 2 layers
- 2 layers85 × 55 mm
- 4 layers65 × 40.1 mm
Aero Zero
ChladpavPy/Aero-Zero
I started this project, because I wanted to build fully autonomous ai drone. When I looked at the flight controllers available on the market, they were full of hardware that I just do not need or just that I could not…
97 parts - 4 layers96 × 125.6 mm
PowerDistributionPCB
CUSail-Navigation/PCB-FA25-SP26
This is a repository containing the PCBs designed during the FA25-SP26 academic year. Due to high compatibility and relative ease of use, all of these files are made with KiCad.
93 parts - 2 layers65 × 66.9 mm
Cat toy
hari-ghatpande/pcb-cat-toy
PCB designed to drive an MG90S servo using an ESP32, driven off of a LiPo battery.
51 parts
Questions
How big is the Panels001 PCB?
It measures 354.5 × 132.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Panels001 use?
308 parts, built around the INA219AID, B5PS-VH, MMBT2222A and SS14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Panels001 KiCad files?
From the jibonaronno/documentsA repository on GitHub, at the commit this page was made from: the board is uprojects/Laurent ESP Mesh/meshlite.pcb/meshlite2/Panel/panels001.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Panels001 design in my own project?
Its repository states no licence, so its author keeps all rights: ask jibonaronno before reusing the design.