Skip to the content
2 layers115.6 × 94 mmNixie v1, the printed circuit board in 3D

PCB for the v1 nixie tube clock the used the exixe boards

Size
115.6 × 94 mm
Copper layers
2
Thickness
1.6 mm
Parts
29
Nets
51
Pads
141
Tracks, vias
167, 6
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
6 Mar 2023
Updated
6 Mar 2023

Overview

Nixie v1 is an open-source printed circuit board by jhrg, from the jhrg/Nixie-v1-pcb repository on GitHub. It is a 2-layer board of 115.6 × 94 mm with 29 parts on 51 nets, routed with 167 tracks and 6 vias.

It is built around the BMP180. Its parts include 8 ICs, 4 capacitors, 3 resistors, 3 connectors and 1 diode. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

1

Parts

29
QtyValueFootprintReferences
4MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2, H3, H4
4exixebreakout_boards:exixe-IN-14NU6, U7, U8, U9
21nFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC1, C2
2Screw_Terminal_01x02TerminalBlock_RND:TerminalBlock_RND_205-00001_1x02_P5.00mm_HorizontalJ2, J3
10.1uFCapacitor_THT:C_Rect_L11.0mm_W4.2mm_P10.00mm_MKTC3
11.0uFCapacitor_THT:CP_Radial_D10.0mm_P7.50mmC4
110kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
11N4002Diode_THT:D_DO-41_SOD81_P7.62mm_HorizontalD1
1330Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2
1560Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR3
1ARDUINO_PRO_MINIARDUINO_PRO_MINI:MODULE_ARDUINO_PRO_MINIU1
1Adafruit_DS3231breakout_boards:Adafruit_DS3231_bbU2
1BMP180breakout_boards:BMP180_bbU4
1BOURNS_PEC11482016514001:BOURNS-PEC11S1
1Barrel_Jack_MountingPinConnector_BarrelJack:BarrelJack_Horizontal_MPJ1
1HSS-B20-053H-01HSS-B20-053H-01:HSINK_HSS-B20-053H-01HS1
1LM317_TO-220Package_TO_SOT_THT:TO-220-3_VerticalU3
1LOGOLogos:kicad_quar_inchG***
1LOGOLogos:arduino_quar_inchG***
1LOGOLogos:nixie-IN-14N-half-inchG***

The 28 most common of 29 parts.

Similar boards

  • 2 layers65 × 31 mmDiy tracker, the printed circuit board in 3D

    Diy tracker

    glidernet/diy-tracker

    Do-it-Yourself OGN Tracker software

    27 parts30GPL-3.0
  • 2 layers98 × 83.8 mmProjeto placa, the printed circuit board in 3D

    Projeto placa

    phfbertoleti/placa_lorawan

    Repositório oficial da placa LoRaWAN, um kit de desenvolvimento para protótipos IoT.

    39 parts19MIT
  • 2 layers86.5 × 59.7 mmESP32 Shield, the printed circuit board in 3D

    ESP32 Shield

    RuiSantosdotme/ESP32-Weather-Shield-PCB

    Complete step-by-step instructions »

    18 parts18
  • 2 layers93 × 42 mmADEM, the printed circuit board in 3D

    ADEM

    timelab/ADEM

    Mobile device for distributed measurements of particulate matter (fine dust)

    29 parts13LGPL-3.0
  • 2 layers55.5 × 21.9 mmPro mini weather, the printed circuit board in 3D

    Pro mini weather

    EnigmaCurry/Arduino-Pro-Mini-Weather

    Arduino Pro Mini Weather

    14 parts7
  • 2 layers61 × 61 mmESP32 FC, the printed circuit board in 3D

    ESP32 FC

    MAATHES-THILAK-K/ESP32-S3_FLIGHT_CONTROLLER

    A custom-designed flight controller based on the ESP32-S3 module, built for compatibility with the esp-fc firmware and Betaflight-like configuration.

    69 parts7Apache-2.0
  • 2 layersAESIR PCB MB, the printed circuit board in 3D

    AESIR PCB MB

    aesirkth/odin-motherboard

    Odin Hybrid Rocket - motherboard design files

    33 parts4

Questions

How big is the Nixie v1 PCB?

It measures 115.6 × 94 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Nixie v1 use?

29 parts, built around the BMP180. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Nixie v1 KiCad files?

From the jhrg/Nixie-v1-pcb repository on GitHub, at the commit this page was made from: the board is Nixie-v1.kicad_pcb and its schematic Nixie-v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Nixie v1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask jhrg before reusing the design.