
ESP32 Shield
Complete step-by-step instructions »
- Size
- 86.5 × 59.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 33
- Pads
- 103
- Tracks, vias
- 112, 2
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 6 Feb 2018
- Updated
- 7 Feb 2018
Overview
ESP32 Shield is an open-source printed circuit board by RuiSantosdotme, from the RuiSantosdotme/ESP32-Weather-Shield-PCB repository on GitHub. It is a 2-layer board of 86.5 × 59.7 mm with 18 parts on 33 nets, routed with 112 tracks and 2 vias.
It is built around the BMP180. Its parts include 6 resistors, 2 diodes, 2 connectors and 1 switch. It belongs with the ESP32 boards of this library.
Main components
1README
README.mdBuild an All-in-One ESP32 Weather Station Shield
In this project I’ll show you how you can build an all-in-one ESP32 weather station shield and display the sensor readings on a web server. The web server displays data from all the sensors and automatically updates the readings every ten seconds, without the need to refresh the web page.
You can watch the video tutorial and demonstration here: https://youtu.be/m5cS21AAhZo
For the complete step-by-step instructions, visit: https://randomnerdtutorials.com/build-an-all-in-one-esp32-weather-station-shield/
How to browse the GitHub repository:
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10K | Resistors_SMD:R_0805_HandSoldering | R4, R5 |
| 2 | 330 | Resistors_SMD:R_0805_HandSoldering | R1, R2 |
| 2 | LED | LEDs:LED_1206_HandSoldering | D1, D2 |
| 1 | 10K | Potentiometers:Potentiometer_Trimmer_ACP_CA6v_Horizontal | RV1 |
| 1 | 4K7 | Resistors_SMD:R_0805_HandSoldering | R3 |
| 1 | BMP180 | ESP32_Shield:BMP180 | BMP_1 |
| 1 | DHT | ESP32_Shield:DHT | DHT_1 |
| 1 | ESP32_Devkit_DOIT_V1 | ESP32_Shield:ESP32_Devkit_DOIT_V1 | ESP32_1 |
| 1 | LOGO | ESP32_Shield:Logo_RNT | G*** |
| 1 | R_PHOTO | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 1 | SD_CARD | ESP32_Shield:SD_CARD | SD_CARD1 |
| 1 | SW_Push | ESP32_Shield:SW_PUSH_6mmx6mm | SW1 |
| 1 | Screw_Terminal_01x03 | ESP32_Shield:TerminalBlock_5mm | J2 |
| 1 | Screw_Terminal_01x03 | ESP32_Shield:TerminalBlock_5mm_Pins | J1 |
The 17 most common of 18 parts.
Similar boards
- 2 layers65 × 31 mm

- 2 layers98 × 83.8 mm

Projeto placa
phfbertoleti/placa_lorawan
Repositório oficial da placa LoRaWAN, um kit de desenvolvimento para protótipos IoT.
39 parts19MIT - 2 layers93 × 42 mm

ADEM
timelab/ADEM
Mobile device for distributed measurements of particulate matter (fine dust)
29 parts13LGPL-3.0 - 2 layers55.5 × 21.9 mm

- 2 layers61 × 61 mm

ESP32 FC
MAATHES-THILAK-K/ESP32-S3_FLIGHT_CONTROLLER
A custom-designed flight controller based on the ESP32-S3 module, built for compatibility with the esp-fc firmware and Betaflight-like configuration.
69 parts7Apache-2.0 - 2 layers

- 2 layers58.4 × 74.7 mm

Placa manutencao preventiva
phfbertoleti/placa_monitoramento_lorawan
Placa - Monitoramento LoRaWAN
23 parts4MIT - 2 layers76 × 65 mm

Questions
How big is the ESP32 Shield PCB?
It measures 86.5 × 59.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP32 Shield use?
18 parts, built around the BMP180. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32 Shield KiCad files?
From the RuiSantosdotme/ESP32-Weather-Shield-PCB repository on GitHub, at the commit this page was made from: the board is KiCad_PCB_ESP32_Shield/ESP32_Shield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32 Shield design in my own project?
Its repository states no licence, so its author keeps all rights: ask RuiSantosdotme before reusing the design.