
NucDeck Left Controller PCB
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!

bootcamp-elec documents the hardware engineering and electronics prototyping fundamentals acquired during an intensive electronics bootcamp.
ProMini is an open-source printed circuit board by jhoratius, from the jhoratius/bootcamp-elec repository on GitHub. It is a 2-layer board of 52.5 × 40 mm with 17 parts on 31 nets, routed with 277 tracks and 30 vias.
It is built around the ATMEGA328P-AU. Its parts include 6 capacitors, 3 resistors, 3 connectors, 2 diodes and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
bootcamp-elec documents the hardware engineering and electronics prototyping fundamentals acquired during an intensive electronics bootcamp. The curriculum bridges software engineering principles with physical systems design, focusing on schematic capture, printed circuit board (PCB) design, and manual assembly.
The purpose of this bootcamp was to transition from low-level logical programming to physical hardware design. The course covered the complete electronic product development cycle: interpreting component datasheets, designing functional circuit schematics, routing multilayer boards, and assembling operational physical prototypes.
Focused on translating electrical concepts and datasheets into logical electronic circuits using the KiCad Schematic Editor.
Focused on transforming logical schematics into physical, manufacturing-ready printed circuit boards.
Focused on the physical fabrication and troubleshooting of completed printed circuit boards.
bootcamp-elec/
├── projects/ # Hardware design project directories
│ ├── scheme/ # KiCad schematic files (.kicad_sch)
│ ├── layout/ # KiCad PCB layout files (.kicad_pcb)
│ └── gerbers/ # Manufacturing files for PCB fabrication (Gerber/Excellon)
├── docs/ # Component datasheets and references
└── README.md| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | jhoratiu:C_0603_1608 | C3, C4, C7 |
| 2 | 10K | jhoratiu:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 2 | 12pF | jhoratiu:C_0603_1608 | C1, C2 |
| 1 | 1uF | jhoratiu:C_0603_1608 | C6 |
| 1 | 330 | jhoratiu:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | ATmega328P-A | jhoratiu:ATMega328P | U1 |
| 1 | Green | jhoratiu:LED_0603_1608 | D1 |
| 1 | J1 | jhoratiu:PinHeader_1x12_P2.54mm_Vertical | J1 |
| 1 | J2 | jhoratiu:PinHeader_1x12_P2.54mm_Vertical | J2 |
| 1 | J3 | jhoratiu:PinHeader_1x06_P2.54mm_Horizontal | J3 |
| 1 | Red | jhoratiu:LED_0603_1608 | D2 |
| 1 | SW_Push | jhoratiu:SW_SPST_B3U-1000P | SW1 |
| 1 | ~ | jhoratiu:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |

dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!


profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance

futureshocked/KLP4e_MCU-Datalogger
This is the repository for the "MCU Datalogger" project.


sportiduino/sportiduino
Electronic timing system for orienteering and similar outdoor sports events on Arduino

SukkoPera/OpenPSX2AmigaPadAdapter
Playstation to Commodore Amiga/CD32 Controller Adapter

4x1md/vx8_gps
DIY GPS module for Yaesu VX-8DR/VX-8DE handheld transceiver.
It measures 52.5 × 40 mm and has 2 copper layers, 1.6 mm thick.
17 parts, built around the ATMEGA328P-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jhoratius/bootcamp-elec repository on GitHub, at the commit this page was made from: the board is ProMini/ProMini.kicad_pcb and its schematic ProMini/ProMini-backups/ProMini-2026-05-16_172137/.history/ProMini.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jhoratius before reusing the design.