4 layers54.6 × 63.5 mm
4 layers31.8 × 38.1 mm
Flight Computer
jespinosa25/Flight-ComputerFlight computer pcb files
- Size
- 31.8 × 38.1 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 64
- Nets
- 66
- Pads
- 242
- Tracks, vias
- 437, 78
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 12 Oct 2025
- Updated
- 17 Feb 2026
Overview
Flight Computer is an open-source printed circuit board by jespinosa25, from the jespinosa25/Flight-Computer repository on GitHub. It is a 4-layer board of 31.8 × 38.1 mm with 64 parts on 66 nets, routed with 437 tracks and 78 vias.
It is built around the ESP32-WROOM-32UE-N4, MAX-M10M-00B and MMC5983MA, with the MS560702BA03-50, W25Q16JVSSIQ and BMI088 among its other parts. Its parts include 14 resistors, 9 capacitors, 5 connectors, 3 diodes and 3 transistors. It belongs with the ESP32 boards of this library.
Main components
7
ESP32-WROOM-32UE-N4
SMD,19.2x18mm-40℃~+85℃ -88dBm 112mA 19.5dBm 2.4GHz 239mA 3V~3.6V Bluetooth4.2 ESP32-D0WD-V3、ESP32-D0WDR2-V3 UART、SDIO、SPI、I2C、GPIO、ADC、I2S、DAC、Ethernet、TWAI SMD,19.2x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
MAX-M10M-00B
SMD-18P-164dBm -40℃~+85℃ 1.8V~5.5V GPS、BeiDou、Galileo、GLONASS UART、I2C SMD-18P GNSS Modules ROHSu-bloxGNSS Modules
MMC5983MA
LGA-16(3x3)-40℃~+105℃ 18bit 2.8V~3.6V 450uA I2C、SPI ±8Gs ±8Gs LGA-16(3x3) 3D Magnetic Sensors ROHSMEMSIC3D Magnetic Sensors
MS560702BA03-50
SMD-8P-40℃~+85℃ 1.5mbar 1.8V~3.6V 140nA 1Kpa~1.2bar I2C、SPI Yes SMD-8P Pressure Sensors ROHSTE ConnectivityPressure Sensors
W25Q16JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 10uA 133MHz 16Mbit 2.7V~3.6V 20 Years 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
BMI088
LGA-16(3x4.5)-40℃~+85℃ Accelerometer Gyroscope LGA-16(3x4.5) Accelerometers ROHSBosch SensortecAccelerometers
DMP3099L-7-ES
SOT-231 P-Channel 1.4W 1.5V 3.8A 30V 46mΩ@10V、62mΩ@4.5V 550pF 6.5nC@10V 63pF 75pF P-Channel SOT-23 MOSFETs ROHSElecSuperMOSFETs
Parts
64| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | TestPoint | RCU_0C:CONN1_RCU-0C_TEC | TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP13, TP14, TP16, TP17 |
| 4 | 100k | Resistor_SMD:R_0402_1005Metric | R5, R7, R9, R11 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.5mm_Pad | H1, H2, H3, H4 |
| 3 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C7, C10, C11 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R4, R13, R14 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R6, R10 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C4, C8 |
| 2 | 27k | Resistor_SMD:R_0402_1005Metric | R8, R12 |
| 2 | 50 | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | Conn_01x04_Pin | 1725672:CONN_1725672_PXC | J1, J2 |
| 2 | NMOS | SI2302-TP:SOT-23_MCC-M | Q2, Q3 |
| 2 | PTS636 SM50J SMTR LFS | GSPTS004102:SW_PTS636_CNK | SW1, SW2 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D2.5mm | +3V3, +BATT |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 110 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 2337019-1 | ul_2337019-1:CONN_2337019-1_TEC | J5 |
| 1 | BLUE | LED_SMD:LED_0402_1005Metric | D3 |
| 1 | BMI088 | BMI088:QFN_BMI085_BOS | BMI088 |
| 1 | Conn_01x06_Pin | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J4 |
| 1 | DMP3099L-7 | DMP3099L-7:DMP3099L-7_DIO | Q1 |
| 1 | ESP32-WROOM-32UE | RF_Module:ESP32-WROOM-32UE | U3 |
| 1 | GREEN | LED_SMD:LED_0402_1005Metric | D2 |
| 1 | LD2980ABM33TR | LD2980ABM33TR:SOT23-5L_STM | LDO |
| 1 | LiPO | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | BT1 |
| 1 | MAX-M10M-00B | MAX-M10:MOD18_MAX-M10M_UBL | GPS |
| 1 | MMC5983MA | MMC5983MA:MMC5983MA_MEM | MAG |
| 1 | MS560702BA03-50 | MS560702BA03_50:SON8_MS5611_TEC | BARO |
| 1 | RED | LED_SMD:LED_0402_1005Metric | D1 |
| 1 | W25Q16JVSSIQ | W25Q16JVSSIQ:W25Q16JVSSIQ_WIN | FLASH |
More from jespinosa25/Flight-Computer
1Similar boards
- 6 layers90 × 45 mm
Hw tele stern
shorlee/TeleSTERN
The TeleSTERN Project is an Open Source Rocketry Flight Computer based on the TeleMega by Altus Metrum.
303 parts3GPL-3.0 - 2 layers
- 4 layers33 × 90 mm
Active drag system
RocketryVT/active-drag-system
Eigen Library, cmake, and arm-none-eabi-gcc tooling required for successful build.
100 parts6MIT - 4 layers31 × 100 mm
Kp ptr
PTR-projects/PTR_mega_hardware
Welcome to the KPPTR-hardware repository! This repository contains the design files for the hardware components used in the KPPTR project.
208 parts3MIT - 4 layers60 × 60 mm
- 6 layers82.5 × 82.5 mm
Gps
xDocka15/GNSS_geret
Dokument popisuje zmeny/upravy v elektronike gnss-geret z 2024 tak aby vznikla jednodoskova prenostitelna verzia.
201 parts - 6 layers150 × 100 mm
- 2 layers66 × 26 mm
Altimetro
Daniel-Alencar/MiniEasy
Esquemático KiCad 10 de um altímetro barométrico de recuperação dupla (apogeu + principal), equivalente em função ao Altus Metrum EasyMini: sensor barométrico, registro de voo em flash, dois canais pirotécnicos com…
56 parts
Questions
How big is the Flight Computer PCB?
It measures 31.8 × 38.1 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Flight Computer use?
64 parts, built around the ESP32-WROOM-32UE-N4, MAX-M10M-00B, MMC5983MA and MS560702BA03-50. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Flight Computer KiCad files?
From the jespinosa25/Flight-Computer repository on GitHub, at the commit this page was made from: the board is V3/V3/V3.kicad_pcb and its schematic V1/Flight_Computer_V1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Flight Computer design in my own project?
Its repository states no licence, so its author keeps all rights: ask jespinosa25 before reusing the design.